viko yachts opinie

Yachting Monthly

• Digital edition

Viko S35 review: the best cruiser on a budget?

• David Harding
• December 1, 2022

Designed in Italy and built in Poland, the Viko S35 looks to offer style and space together with remarkable value for money. David Harding sees if the reality matches the promise

Product Overview

• Inexpensive for her size
• Deep sheltered cockpit
• Performance potential
• Basic hardware
• Needs refining below decks
• Limited non-slip on deck

Price as reviewed:

First seeing the Viko S35 at the Düsseldorf boat show in 2019, not long after her launch, she struck me as a boat worth watching. She looked as though she might sail quite nicely and also had a price tag (just €60,000 plus VAT) that would have looked more at home on a 32-footer.

Only a few years earlier I had tested the Viko 21 and I’d come away with mixed feelings, so I was interested to see the new arrival. She too was designed in Italy by Sergio Lupoli, whose racing yachts and performance cruisers (including the Comet range) go back to IOR designs from the late 1970s.

I sailed his Comet 33 in 2007, rather liked it and was disappointed that the Comets never gained a foothold in the UK, though Viko subsequently used the hull of the Comet 31 to produce the Viko 30. This move by Viko – taking on an existing design to build under their own name – reflected a broader push by Polish builders to sell boats themselves rather than just act as contractors for yards in western Europe.

Many well-known builders have had their boats produced (or at least moulded) in Poland for decades. Some I only learned about by chance when, poking around in the back of laminating shops in the middle of nowhere in the depths of Polish winter – as you do – I found the names of some highly reputable boats attached to various moulds.

The new-generation ‘own-brand’ Polish boats have typically been very inexpensive for their size. I have, however, often found shortcomings in the equipment and fit-out. Designs that have been fundamentally sound and seemingly well built have been let down by lack of detailed thought, as though the designer has done the basics and then handed the project over to a yard run by people with limited experience of how a boat works.

For this reason, among many others, I was interested to see how the Viko had turned out when, nearly three years after meeting her in Düsseldorf, I went to sail the first boat to arrive in the UK.

The cockpit is deep and a sensible width, allowing the side decks to run all the way to the stern. Photo: David Harding

What struck me immediately was the height of the topsides. She’s quite sharp-lined, but I hadn’t remembered quite how far the gunwales were above the waterline. Otherwise there’s little out of the ordinary in the context of a modern cruiser with some sporty pretensions: a double-spreader, high-fractional rig (our test boat’s was 1.5m/5ft taller than the standard), pronounced chines running most of the length of the hull, a vertical stem, an optional hinge-down bathing platform, rectangular ports in the topsides and an L-bulb fin keel giving a draught of 1.95m (6ft 4in).

Article continues below…

Dehler 30 OD: the most fun you can have on the water

Can a one-design offshore racing yacht be suitable for short-handed cruising too? This might actually be the case with the…

Dufour 32 – impressive new smaller yacht

Dufour is one of the few yards that has maintained a constant presence at the smaller end of the new…

The stern is fashionably wide, allowing plenty of space for twin wheels, and another option is a moulded bowsprit to keep the anchor away from the stem and project the tack of an asymmetric spinnaker. It’s all pretty standard in many ways, though even this taller rig didn’t look particularly tall. It made me wonder about the amount of weight in the keel, a modest rig often indicating a relatively high centre of gravity because of shallow draft and/or a low ballast ratio.

In this case, around 33% of the boat’s weight is in the keel and the draught is enough to place it reasonably low, so sail-carrying power shouldn’t be an issue.

A comfortable helming position from the coamings. If you want to sit inboard, you even have a backrest. Photo: David Harding

Onboard the Viko S35

Hopping aboard the Viko S35, you find two elements worthy of note straight away. One is the deep cockpit with high coamings, which make it feel much less exposed than on many modern cruisers, with their wide, shallow, dance-floor cockpits. For a boat sold as a family cruiser, that’s a good start.

Moulded bulwarks running the length of the boat lend security outboard. These bulwarks seem to be making a comeback and are now widely seen in place of the once-almost-ubiquitous aluminium toerail bolted through the hull-to-deck joint.

Less convincing to me was the coverage of the non-slip finish on the coachroof. Sizeable areas were left smooth. At this stage I normally like to go sailing to see how a boat behaves. If she sails and handles nicely, it’s worth looking at everything else in more detail. Otherwise you have a non-starter and nothing else matters quite so much.

We motored out into Southampton Water, pushed along by the 30hp Yanmar – an upgrade from the standard 15hp. Getting the mainsail up proved to be our first challenge because of a mast gate that wouldn’t stay in place. The gate should be easy to improve, and would need to be improved because the only way to get the reefing cringles on to the tack horns would be to remove some slides from the mast as you lower the halyard.

I would suggest that reef spectacles would be a worthwhile addition. Alternatively fit reefing pennants, invest in some extra hardware and lead them aft.

The sails on our test Viko S35 were the ‘high performance’ versions (still in Dacron), supplied as part of an optional package with the taller rig for a very reasonable £1,750.

Once under sail, we slipped along nicely enough in about eight knots of breeze and flat water, typically making just over four knots on the wind and tacking through 80-85°.

Our speed would undoubtedly have been greater had we not been dragging some weed around with us. A quick scrub from the pontoon before we set off had failed to remove much of what we could see at the bow, and we don’t know how much more was lurking out of sight. A folding prop would make a difference too.

On a cruising boat it’s interesting to see a full-width mainsheet traveller, set into the cockpit sole immediately forward of the wheel pedestals. It’s a feature of which I very much approve, unexpected though it was given that most of the hardware and systems are pretty basic. I also liked the simplicity and directness of the mainsheet purchase directly from traveller to boom.

High topsides are made higher by the generous moulded bulwarks on which the stanchions are mounted. Photo: David Harding

The problem is that it’s just 4:1 which, predictably, made it impossible to apply anywhere near enough tension when the breeze kicked in.

Our test boat had non-standard grab handles and pods for nav instruments on the helm pedestals. They would be at risk of being snagged by the mainsheet during manoeuvres, so owners might prefer to mount their instruments elsewhere.

At the helms of the Viko S35 you have a comfortable perch on the coamings, as you do further forward in the cockpit. They’re nicely angled and you can lean back against the guardwires.

The stanchions slot into broad bases, which spread the load nicely and should make stanchion replacement relatively straightforward. My only concern was that a fair bit of rust had formed already.

A full-width mainsheet traveller is set into the cockpit sole. It’s a good arrangement but both the traveller and the sheet need more purchase. Photo: David Harding

Staying on track

Slack in the steering cables between the wheels didn’t enhance the helming experience to start with. Thankfully it was a simple job to tension the bottlescrew in the linkage, reached via a hatch in the cockpit sole.

The rudder bearings were stiff, however, making it hard to feel the increase in weather helm when the wind eventually picked up to around 14 knots. And although our test boat had the bigger rig, I was surprised by how quickly we needed to start de-powering the Viko S35 to keep her on track: she would round up even at a modest angle of heel.

If you can feel the rudder through the helm, it’s much easier to know when you’re pushing the limits. If that feel is disguised by stiff bearings – and perhaps reduced further by a lightly balanced rudder blade, as I suspect might have been the case here – you’re more likely to find that you have applied more lock than you realised.  Then the rudder stalls and the boat rounds up.

As a matter of course you don’t want to sail with more than a few degrees of rudder angle. Any more means something is amiss. Easing the traveller was a quick fix. I would have liked to be able to de-power by other means first, such as removing some of the excessive forestay sag. That wasn’t possible because the rigging was under-tensioned and the leeward D1 (lower shroud) was waving around in the breeze.

Combined with the (optional) 4:1 purchase on the backstay, it meant that tensioning the forestay wasn’t an option.

Of course on a racing boat you expect to change gear all the time with variations in wind speed. On a cruiser, both the need and the crew’s interest or inclination are generally less.

I would like to sail a Viko 35 with a clean bottom, a folding prop and tensioned rigging for starters, not to mention easier rudder bearings and some upgrades to the hardware and sail-control systems.

Lupoli seems to be a designer who gets his sums right, so I suspect the boat would feel and behave in a very different manner with a little tweaking, even if the standard rudder doesn’t look particularly big. You would undoubtedly have to start de-powering earlier still if you had the 1.6m/5ft 3in shallow fin and the shallower rudder that goes with it.

The stanchion bases are mounted atop the high bulwarks. Some were showing early signs of rusting. Photo: David Harding

Viko S35 on deck

Moving to the other end of the boat, we find an anchor well in the bow. If you have the optional bowsprit, the anchor is likely to live on its projected roller and, with the windlass (included in the dealer’s UK Cruiser Pack) feeding the rode straight down through the deck, the locker itself is likely to be used principally for warps and fenders.

Moving aft again is easy given the width of the decks and the outboard rigging. The headsail tracks, mounted just outboard of the coachroof, give a reasonably narrow sheeting angle. I would want to try reefing the headsail in a good breeze to make sure that the tracks extend sufficiently far forward to maintain leech tension: with a low-clewed sail like this, the position of the cars is more critical than it is with a higher clew.

The drop-leaf table is simple but provides useful handholds and a bracing point. Photo: David Harding

I would also want to ensure that extra deck hardware could be fitted for handling reefing pennants, spinnaker gear, the kicking strap (another 4:1 purchase) and anything else one might want led aft.

Clutches are mounted on raised plinths forward of the winches, but the solid moulded headlining throughout (with just one removable panel around the compression post) provides no access to the deckhead.

Back in the cockpit of the Viko S35, stowage is limited if you have the twin double aft cabins as on our test boat. You have a deep locker each side under the helm seats and a shallower bin just forward of the transom that could be used for liferaft stowage. As on most boats these days, there’s no readily-accessible stowage for small items.

The interior is simple and mostly neatly finished in light oak, with no mouldings except the heads and the rather shiny headliner. Photo: David Harding

Below decks

Internally the Viko is simply finished in European light oak. The saloon feels nicely woody from the gunwales down. Overhead, the shiny moulded headlining inevitably looks rather plasticky.

Despite the high-volume hull, this is not an enormous boat down below by modern standards. That’s partly because the rudder is mounted well forward and the space abaft the helm pedestals is occupied by the steering linkage, so the aft cabins don’t extend as far aft as is often the case. Even though their berths are only 6ft 1in(1.85m) long, this inevitably pushes the whole layout forward.

The boat has a fairly basic forecabin, with the berth set noticeably low down in the hull. Photo: David Harding

If you have twin double aft cabins, the heads is opposite the galley, leading to a less open feel down below.

The extra cabin is a lot to fit into a boat of this size. If you have just the one double cabin in the stern, to port, it’s a good deal larger, extending across the centreline, and you can sleep athwartships. Then you have a cockpit locker to starboard and the heads moves aft, creating space for a small chart table.

Whichever Viko S35 layout you choose, the saloon berths are straight, parallel and 1.88m (6ft 2in) long.

Apart from the headlining and in the heads, Viko have used no interior mouldings, maximising stowage space and allowing access to the outer hull. Reassuringly, bulkheads appear to be bonded directly to the hull and deck.

The aft cabins are fairly compact if you have two of them; more spacious if there’s just the one. Photo: David Harding

Because the saloon is well forward, the forecabin isn’t vast. Here you will find a low V-berth and some locker space for storage. Features that might bug me include the absence of catches to hold doors open (or even positive closure for the double doors to the forecabin), the smooth, flat companionway steps (potentially tricky when wet), nothing to hold the steps up when you need to get at the engine, lack of a crash bar in the galley and a total absence of engine insulation.

It made me wonder about fire-proofing although, strangely enough, noise levels throughout the vessel didn’t seem excessive.

The Viko is an interesting mix of the basic cruisey and the slightly sporty. She has the appearance of a modern performance cruiser, statistics that tell you she should be a reasonably quick boat, and some features in keeping with this, such as the full-width traveller. On the other hand, most of the sail-control systems are pretty basic and, in some cases, barely adequate even for cruising purposes. She also seemed to prefer lighter conditions, and was less sure how to behave when the wind picked up. A performance boat needs to be tuned and equipped like a performance boat in order to handle like one. Otherwise you’re trying to drive a sports car on four get-you-home spare wheels. I believe the Viko 35 has potential. She just needs the opportunity to show what she can do.

• Competitions
• Print Subscription
• Digital Subscription
• Single Issues

Your special offer

Subscribe to Sailing Today with Yachts & Yachting today!

Save 32% on the shop price when to subscribe for a year at just £39.95

Subscribe to Sailing Today with Yachts & Yachting!

Save 32% on the shop price when you subscribe for a year at just £39.95

Boat test: Viko S35

The viko s35 is the cheapest 35-footer on the market by a country mile. sailing today with yachts & yachting editor  sam jefferson finds out how it is on the water..

Writing about new yachts can be a funny game. I often catch myself writing that a boat a little short of £1m represents ‘very good value’.

Given my own boat cost £5k this doesn’t seem to stack up. Yet it is, of course, often true.

There aren’t that many boatbuilders out there that are absolutely stinking rich after all.

I don’t see Elon Musk quaking in his boots over the launch of the latest range of Bavaria Yachts.

Now, it’s hard not to be cynical when confronted with a price tag of this nature. I even heard someone mutter ‘what’s the catch’.

Yet I had reason not to be cynical – largely because a few years back I tested the similarly keenly prices Viko S30 and was pleasantly surprised to find that it was a polished performer – yes, a little plasticky down below, but the most important thing was that it sailed really rather well in what were, from memory, rather wild conditions.

I therefore eyed the new S35 without prejudice and looked forward to test sailing the boat.

For a boat with such a low price tag, first impressions are important and the S35 certainly gives a decent account of itself; dramatic and thoroughly contemporary lines give a first impression of both speed, style and, yes, a touch of class.

There’s a reason for this, as the S35 was designed by Sergio Lupoli who is best known for his work with Italian boatbuilder Comar, whose Comet range of cruiser/racers are proven performers.

In fact, the Viko 30 shares the same lines as the Comet 30, although this experiment has not been repeated with the S35.

Anyway, Lupoli knows how to turn out a good looking yacht and the S35 features decent freeboard and a heavily rockered profile, a deep (1.95m) bulbed keel with the option of a shallower (1.6m) keel, single rudder with relatively low aspect ratio, modest beam carried well aft, a dreadnought bow with fixed sprit and a towering sail plan – with the option of a significantly smaller one for less speed obsessed cruisers.

All in all, the first impression is good as you approach the boat – it does not look particularly bargain bin, it must be said.

What must also be said is that Viko managed to get to a very keen price by making a lot of kit non-standard. This is certainly not a rarity at all but it is rather taken to the extreme here.

For example, the standard engine spec for the S35 is a 15hp diesel with the option of 20hp or 30hp upgrades.

I think it’s fair to say most boats of this size have a 30hp as standard. Nevertheless, Viko’s UK broker estimated that a decent amount of add ons still brought the price to around £100k, which remains lower than a similarly specced 35 footer from, say, Beneteau. Needless to say that the test boat was fitted with almost every option going.

Step aboard and the boat still feels pretty good. There are twin helms but these are an option – although a standard single wheel is hardly a disaster on a boat of this size.

It does however, open up the roomy cockpit which is very deep, giving a good sense of security. The boat has a decent amount of storage in a pair of   lockers under the helmsman’s seats.

It should be noted that the test boat was the three cabin version, which actually removed a chunk of that accommodation, as on the two cabin version the starboard side aft cabin is replaced with a large storage space although this is accessible only from below decks.

The sporty feel of the yacht is upheld, as the boat features a traveller situated in front of the helm, with the mainsheet on a cam cleat. There are two winches on the coamings for the headsails and a further pair on the coachroof for the running rigging.

The helm feels reasonably enclosed by the bathing platform and there is a sensibly dimensioned cockpit table to round things off.

Out on the side decks there is a good feeling of space and the boat features an unusually large raised toerail which gives an added feeling of enclosure but also seems to somewhat needlessly add to the freeboard, which seems a bit peculiar to me.

I seemed to recall that the Viko S30 was a bit plastic fantastic down below but this wasn’t really the impression I got from the S35. Judicious use of light oak made for a very pleasant vibe and the overall feel was one of light and space.

It’s only when you look a little closer that you note that the door handles look a bit, well, undersized and the sink cover is a tad flimsy. Yet the feel was good and the basic joinery was well done too.

The layout can’t be wildly radical in a 35 footer so on the Viko there is a standard L-Shaped galley to port, heads to starboard, and saloon area up forward.

There are double doors opening into the forecabin, which adds to the feeling of light and space, and the fore cabin is a decent size. As mentioned, the test boat was the three cabin version and this was a shame as the two cabin option seems more sensible to me.

In addition to more storage, you get a larger aft cabin and heads/shower compartment plus the option of a chart table. By contrast, the three cabin version offers a lot of accommodation but the aft cabins are pretty cramped and low plus the heads/ shower is a bit on the small side.

It sounds like I’m being harsh and, in fairness, I am. This is, after all, a 35 footer built to a very competitive price and the overall impression down below is very good. It’s an eminently liveable space that actually feels a bit classy.

There are some small details that betray the fact the boat is built to a strict budget but overall, the feel is good.

While the overall feel of the new Viko S35 is good, how does she perform under sail? We had a good day for a test, with conditions starting out fairly fluky and then building as we headed out of Southampton Water into the Solent, peaking at 20kts or so.

We put up a full main, rolled out the headsail and were immediately on the move at a sprightly pace. We headed out the River Hamble in company with a big Hallberg Rassy 46 of the old school and it was instructive that we promptly took large chunks out of this boat in the modest conditions.

As mentioned, this boat had the sportier rig, which is a full 3m taller than the standard so, as you would expect, the boat was quick off the mark. The helm felt reasonable but the feel was stymied somewhat by one of those old school autopilots that is built into the wheel and which you engage manually.

This seemed to add some friction to things and detracted from the feel to some extent. As the wind picked up we really started trucking along but it was at this point that the boat demonstrated that a combination of the big sport rig and the shallower 1.6m keel and smaller rudder was not an ideal mix, with the boat spinning out a couple of times.

The Hallberg-Rassy forged on stolidly and left us in its wake until we put in a reef and rolled away a bit of headsail. At which point the boat found its feet nicely and got into a good groove, hitting 7kts and behaving very well.

I would say that considering the boat started corkscrewing up into the wind fairly early, you should not bother with the bigger rig at all if you go for the 1.6m keel version. By the time we reefed down, we had the equivalent sail area as the smaller rig version anyway. On the other hand, I’d be interested to see how the deeper draft boat sails in boisterous conditions with the bigger rig.

Easing off the wind, the boat completely regained her composure and it was tempting to shake out the reef. We were now making a solid 7kts plus and the boat felt good. The mainsheet was extremely well placed from the helm and the helm position was exceptionally comfortable whether you were sitting out on the rail or reclining against the padded backrest.

This article first appeared in the November 2022 issue of Sailing Today with Yachts & Yachting. Try a single issue here .

RELATED ARTICLES MORE FROM AUTHOR

Multihull Show 2024: Win Tickets!

Flying Mantis: Foiling Trimaran Seeking New Investor

Boat Test: C-Cat 48

Offering a wealth of practical advice and a dynamic mix of in-depth boat, gear and equipment news, Sailing Today is written cover to cover by sailors, for sailors. Since its launch in 1997, the magazine has sealed its reputation for essential sailing information and advice.

• British Yachting Awards 2022
• Telegraph.co.uk

ADVERTISING

© 2024 Chelsea Magazine Company , part of the Telegraph Media Group . | Terms & Conditions | Privacy Policy | Cookie Policy

Polish boat builder renowned for making boating affordable. Some of the best priced new sailing yachhts.

from EUR 14,900

from EUR 16,990

from EUR 24,000

from EUR 44,900

from EUR 66,600

Viko reviews and tests

Viko S35 review: the best cruiser on a budget? - Yachting Monthly

Boat test: Viko S35 - Sailing Today

THE DUSSELDORF BARGAINS: VIKO S35

Latest boat videos.

Added on Feb. 27, 2021

Practical Boat Owner

• Digital edition

Viko 21: A trailer sailer that sets the standard

• David Harding
• September 1, 2023

Costing from £23,000, the Viko 21 seems remarkably good value – but what does she offer apart from economy? David Harding investigates

The Viko 21 has four berths. Credit: David Harding Credit: David Harding

Product Overview

• Minimum windage under sail
• Towering topsides
• Standard swing keel is not performance friendly
• Rigging needs constant tuning
• Too much play in the rudder

Price as reviewed:

For a 21ft (6.4m) trailable cruiser, the Viko 21 has attracted a good deal of attention since she landed in the UK.

This was clearly a boat that I had to sail: people wanted to know what she was all about.

The reason for the unusually high level of interest was simple. Here was a four-berth weekender with an almost unbelievable price tag.

How could anyone build such a boat for the money?

She’s vast down below too, yet her sharp lines, vertical stem and notably fine entry hint of a sporty pedigree.

That’s no surprise when you learn that she comes from the drawing board of Sergio Lupoli, the man responsible for, among others, the Comet 26 and 31 built in Italy by Comar Yachts.

I saw the Comet 26 at the Düsseldorf Boat Show, at a time when a well-established yacht dealership in the UK was looking to add her to their range.

If you prefer to sit outboard you could ditch the removable backrests, fit a tiller extension and helm from the coamings. The netting isn’t standard. Credit: David Harding

Sadly this never happened, but what has happened is that Viko used the hull of the Comet 31 to produce the Viko 30.

This cooperation has now resulted in the new Viko 26.

But let’s return to the Viko 21. Achieving space, pace and grace within such a short length will always be a challenge and, to be fair, the Viko does have rather towering topsides.

She looks like the bow section of a 42-footer that’s been chopped in half.

Then again, her long waterline and light weight, which give her a displacement/length ratio of under 100 and a sail area/displacement ratio of 24.2, point to some performance potential.

She sends out an interesting variety of messages.

One consequence of this high freeboard and wide stern is enormous interior volume.

The accommodation runs the entire length of the boat, because the height and the broad transom allow a double berth to be fitted athwartships beneath the cockpit sole .

It’s neatly made in stainless, but the rudder assembly allows too much play. Credit: David Harding

So if you want a 21-footer that’s extraordinarily inexpensive, light enough to be easily trailed (she weighs around 950kg, or just over 2,000lb in proper money) and roomier than many 25-footers, this is a boat you can hardly ignore.

If you think £23,000 is more than you’ve seen her advertised for, that’s because it’s for the UK specification.

The Viko has been promoted elsewhere with a spec that’s pared down to – or arguably below – the absolute minimum, whereas over here she comes with a number of items that most owners would deem essential.

Add a 5hp outboard for around £1,000, then tick a few boxes on the options list, and you’ll soon be into the mid-20s.

On the day before we went for a sail, the wind was also into the mid-20s.

We had been trying to get afloat for a long time, but pinning down a Viko to take for a spin proved to be a challenge.

Boats that arrived in the UK were despatched to their new owners as soon as they landed: they simply didn’t hang around.

It looked at one point as though a fin-keeler might have been in residence with the dealer for a while, but it too disappeared in short order.

Besides, since the centreplate version is by far the most popular, it made sense to test one of those.

The sail area is 23.0sq m/248sq ft. Credit: David Harding

Like many Polish designs, the Viko 21 comes with multiple choices of keel design : the standard flat steel centreplate, a fixed fin with a bulb, or a bulbed fin that lifts vertically.

The latter two will enhance performance significantly, being appreciably deeper, heavier, profiled sections of higher aspect ratio and with a lower centre of gravity.

The centreplate, on the other hand, gives the shallowest draught, is easier to lift than the lifting fin and will swing up if it hits the bottom.

It accounts for just 40% of the ballast, the rest being internal.

Given that buyers of a boat like this are unlikely to be obsessive about speed or tacking angles, its popularity comes as no surprise.

When everything finally came together for our sail, the flat water and offshore breeze of between 12 and 17 knots would have made no serious demands on any boat, but at least the gusts were enough to push the Viko 21 just a little.

She proved undemanding to sail as we made upwind with mid-4s showing on the log.

Continues below…

Haber 620: a trailer sailer like no other

How on earth do you get full standing headroom in a trailer-sailer that really sails? David Harding meets the Haber…

The best trailer sailer boats for weekend cruising… or longer

Duncan Kent reviews a selection of new and used trailer sailer boats that are large enough to accommodate crew for…

Viko S21: Test sail of this highly affordable nearly new trailer-sailer

Three to six months is the hump to get over for new boat ownership. It’s long enough to take the…

Drascombe Drifter 22 Mk II review: The modern classic trailer sailer reborn

For such a venerable name in the world of boating as Drascombe, the launch of a new model is quite…

We tacked through an acceptable if unremarkable 90° remaining agreeably light and the rudder blade retaining its grip until we pushed her to near gunwale- awash.

That’s a lot of heel on a boat with this much freeboard.

When she did break free from the rudder, she rounded up gently into but not through the wind; no full-on ‘French broach’ of 180°.

For all her docility this is a boat that, perhaps ironically given her target market, does make some demands on the crew.

The rigging on our recently-commissioned test model had already begin to stretch, leading to cap shrouds that were on the slack side and, correspondingly , correspondingly, to a saggy forestay.

The enclosed heads compartment is an option. In the stern, abaft the removable companionway steps, the broad transom and high freeboard create space for a generous athwartships double berth. Credit: David Harding

As is often the case with Polish trailer-sailers, the mast and standing rigging were about as slim as they could be.

This keeps weight and windage to a minimum, which is a good thing – vital, in fact, with a boat that doesn’t have a lot of low-down ballast to help keep her on her feet.

At the same time, it means the rigging really does need to be kept up to tension, because a boat that’s not the stiffest is going to be more sensitive to the heel-inducing consequences of forestay sag.

Tensioning the backstay is of limited help in these circumstances because it makes the cap shrouds even slacker: tight caps are the answer.

The sails weren’t too bad a cut. They were let down by stiff, un-tapered battens in the mainsail and a cloth that, as you often find on budget-priced boats, felt light and highly resinated.

I couldn’t help wondering how long they would hold their shape.

Plenty of space to sit down or stretch out, but stowage is limited. Credit: David Harding

Once sails start to stretch, heel will increase as performance decreases, and the effects will be more noticeable with a boat that doesn’t have a lot of power in reserve.

Even tensioning the luff of the jib is a challenge when you’re under way because the roller-reefing system comes with an integral halyard.

There’s no substitute for one that comes down the mast, though the integral system simplifies trailer-sailing .

Elsewhere in the rigging department, I think every Polish trailer-sailer I have ever sailed has misaligned swagings on the standing rigging, and the Viko 21 is no exception.

None of these points is by any means unique to the Viko.

They just mean that you need to be aware of them: keep the rigging tensioned, replace the sails the moment the draught starts to creep aft, and be aware of the need to depower the rig when the wind picks up.

Flatten everything down using the halyards , outhaul and backstay, vang-sheet the mainsail (having first inverted the kicker to make adjustment easier) and keep the boom well off the centreline.

It was easy to induce excessive heel and I would be concerned that some owners might lack the sailing skills to get her going.

You can use the single reef point in the mainsail and take a few rolls in the jib, only you’ll then find the sheet lead is too far aft and sail shape will be further compromised.

And you can’t reef those topsides.

Much of the hardware on deck is from familiar brands.

Spinlock supply the two XAS clutches each side, the winches are Lewmar 7s and some of the blocks are Selden.

The stainless-steel work is of typically neat Polish design and finish.

Sail plan of the Viko 21

This includes the (optional) pivoting mast heel for easy raising and lowering of the rig. A 4:1 mainsheet is taken to a raised plinth on the cockpit sole, the plinth extending aft to form a foot-brace for the helmsman.

This is presented as a sit-in boat: no tiller extension is provided, and removable backrests (£540 extra) slot into the inboard edge of the coamings.

My inclinations would be to save the £540, invest in a tiller extension and helm from the coaming.

On the other hand, the coaming is so close to the single guardwire that, as so often on small boats, you couldn’t angle your torso back far enough to counter the effects of gravity once the boat starts to heel.

Dipping underneath and outboard of the guardwire would be the answer, as on the Haber 620 .

On our test boat, the netting to help keep the owner’s dog on board would have made that difficult.

We shouldn’t forget that this is not sold as a performance boat, so let’s not get carried away.

Looking forward: this shot from the stern gives an impression of the volume offered by the Viko 21. Credit: David Harding

She’s sensitive to crew weight, however, and in any breeze that means keeping your weight as far to windward as you sensibly can.

Simple geometry means that the higher up the crew’s weight in relation to the boat’s beam, the sooner it comes into line with the centre of buoyancy as the boat heels and, therefore, the sooner it begins to induce heel rather than counter it.

I was reminded of this in no uncertain terms when I went forward and stood on the boom to take a shot of the deck and cockpit.

The precarious angle of heel that resulted encouraged me to hop down and aft again without delay.

There’s no arguing that high freeboard and easy-lift keels have their benefits, but you also need to understand their effects when you’re sailing.

Generally speaking, the smaller the boat the harder it is to make it do everything well.  You choose according to your priorities.

Back in the cockpit, single-handed manoeuvres are simple enough if you’re coordinated.

The split pulpit means you need to give a sharp luff after a tack if the foot of the jib has got outside it, then sheet in before bearing away to a close-hauled course.

Just make sure you don’t get a riding turn around the winch , because it’s a fair distance from the car (which needs to be right at the forward end of the track).

Then you need to create some slack in the sheet abaft the winch to jam it in the cam cleat on the bulkhead.

It’s not slick, but it’s doable with two hands.

Occupying the double deck-organisers and clutches to starboard are the main halyard and centreplate line.

To port is the topping lift . Reefing is at the mast.

It’s not obvious how extra hardware could be fitted if, for example, you wanted to add spinnaker gear or lead the reefing pennants aft.

On the subject of the centreplate, it was notable that it clonked in its case even when we were sailing upwind.

Plates often clonk when the pressure comes off, downwind or when the boat’s rocking around at rest with the sails down.

Upwind it’s unusual. Matching clonking came from the rudder.

It looked to be a perfectly robust and neatly-made structure, with the stock and tiller in stainless steel in typical Polish fashion.

It’s just that there was play between the stock and everything to which it was attached: the hinge-up tiller, the blade and the transom brackets.

Combined with the boat’s slight tenderness, it contributed to a feel that wasn’t exactly taut and sporty; power, precision and positivity were rather lacking.

Fundamentally this is a design that has potential when it comes to sailing.

So is it unfair to mention some of these aspects of her performance, given that she’s unlikely to be bought by people planning to thrash around exposed headlands against 30-knot headwinds?

The important thing is to understand the boat’s limitations.

With a clean bottom, the outboard lifted well clear of the water, new (or still-good) sails and a crew who know what they’re doing, she’ll sail well enough for most people in undemanding conditions.

But give her a weedy bottom, a prop dragging through the water, slack rigging, sails that are poorly trimmed or past their prime, an inexperienced crew – any of these, in fact, let alone all – and I think she might start to struggle when the wind picks up.

None of these factors would help any boat, but some would have greater capacity than others to overcome them.

Stick to sheltered waters with the Viko 21, don’t ask too much of her, and enjoy the aspects of her design that other boat can’t match.

If you like the boat but want more power and performance, you should seriously consider one of the alternative keels.

Don’t underestimate the difference they can make.

Then make some mods to the rudder (the fin-keeler has a fixed blade anyway), upgrade the sails and ensure the rigging is tweaked up, and the boat would be transformed.

As for the other practicalities of her design – well, nothing major stands out on deck.

The deck sits on a return in the hull moulding that forms a low-level toerail, a bead of sealant running the length of the join.

You find an anchor locker in the bow and a half-height locker to starboard in the cockpit.

A stainless steel support for the mast is permanently bolted to the transom if you have the mast- raising system.

There’s no rubbing strake , so you’ll need to be nifty with the fenders .

For a boat of her length, the Viko 21 offers an extraordinary amount of space.

You can’t stand up as you can on the Haber, for example, but the entire length of the hull is used.

The only enclosed space is the heads compartment if you choose it (£1,000 extra).

A tall bloke can just about fold himself inside, sit down and close the door.

At the foot of the removable companionway steps , you find yourself facing a lot of volume and not much else.

With minimal stowage it would be a question of living out of kitbags or doing some customising.

Narrow stowage troughs are outboard of the backrests in the saloon and there’s space beneath the forward berth.

Foam buoyancy is under the settee berths.

Opposite the heads is a small moulded galley unit.

I’m not sure I would consider electrically- pumped water to be vital on a 21ft weekender and I was also rather disconcerted to see a 13A socket just below the tap at the aft end of the galley.

A full interior moulding forms the basis of the accommodation. Above it, the hull sides are lined in vinyl.

The teak-and-holly-effect sole is bonded down and there’s a moulded headliner.

It’s simple, modular and, as you would expect, all pretty basic.

The finish is a bit tacky in places, but then you’re not paying top dollar.

Enjoyed reading Viko 21: A trailer sailer that sets the standard?

A subscription to Practical Boat Owner magazine costs around 40% less than the cover price .

Print and digital editions are available through Magazines Direct – where you can also find the latest deals .

PBO is packed with information to help you get the most from boat ownership – whether sail or power.

• Take your DIY skills to the next level with trusted advice on boat maintenance and repairs
• Impartial in-depth gear reviews
• Practical cruising tips for making the most of your time afloat

Follow us on Facebook , Instagram and Twitter

The outstanding features of the Viko 21 are the high volume and low price. But if you want features like this, you have to accept some compromises elsewhere. A builder of a boat of similar size told me that his materials alone cost more than the Viko sells for. In terms of the hull lines and sail plan, the basic design looks fine as long as you accept the implications of those towering topsides. The swing keel and budget specification do nothing for her sailing qualities but, as we’ve discussed, you could do something about both of those. I can’t over-stress the difference one of the alternative keels would make. Then either accept the boat as she comes, or spend a bit of time and money making some mods. What matters is that the basic structure is sound. It’s never easy to know that unless you witness (or have verified) every stage of the building process.Happy owners Given the rate at which the little Viko has been selling, plenty of owners are willing to accept what she has to offer. I spoke to one who, although admitting to limited sailing experience, was living aboard and was delighted. If there’s a boat whose price allows people to buy it and that then makes them happy, that can’t be bad.

• Boats for Sale
• Viko Yachts

New and used Viko Yachts for sale

• United Kingdom
• Viko Yachts 21
• Viko Yachts 26
• Viko Yachts 30
• Viko Yachts S21
• Viko Yachts S22
• Viko Yachts S26
• Viko Yachts S30
• Viko Yachts S35
• Viko Yachts Stratos 43

Search for a Viko Yachts on TheYachtMarket today. We have Viko Yachts brokers and sellers from around the world at great prices.

History of Viko Yachts

Established in the scenic city of Poznań in Poland, Viko Yachts has positioned itself as one the pioneering boat manufacturers globally. The company was founded in the year 1986 by an enthusiastic sailor and engineer with a vision to craft unrivalled pleasure boats that blend unique design, fine craftsmanship, and technological excellence. Over the years, the company has grown exponentially, constantly pushing the boundaries in boat development and production. Today, Viko Yachts is reputed for its wide array of sailing yachts, distinguished for their sturdy construction, generous interior volume, and superior sailing performance.

At the heart of Viko Yachts is an innovative spirit and an unwavering commitment to quality. It employs modern building techniques, utilising high-quality materials to ensure resilience, optimum weight, and uncompromised stability. The company's unique combination of hand-laid solid laminate and sandwich constructed hulls and decks, with durable and lightweight furniture elements, has garnered wide acclaim in the industry.

Remaining true to its origins, Viko Yachts' headquarters and production facilities are still based in Poznań, Poland. It is from this hub that all manufacturing process, including prototyping, moulding, assembly and finishing, take place. The company continues to chart new territories, displaying an incredible resolve to elevate the standards of yacht building. Whether it's a day cruiser or a high-performance sailing yacht, Viko Yachts is synonymous with memorable sailing experiences.

Which models do Viko Yachts produce?

Viko Yachts produce a range of boats including the Viko Yachts S30 , Viko Yachts 30 , Viko Yachts S21 , Viko Yachts S22 and Viko Yachts S26 . For the full list of Viko Yachts models currently listed on TheYachtMarket.com, see the model list in the search options on this page.

What types of boats do Viko Yachts build?

Viko Yachts manufactures a range of different types of boats. The ones listed on TheYachtMarket include Sloop , Cruiser , Coastal cruiser , Racing boat and Aft cockpit .

How much does a boat from Viko Yachts cost?

Used boats from Viko Yachts on TheYachtMarket.com range in price from £19,700 GBP to £144,000 GBP with an average price of £58,200 GBP . A wide range of factors can affect the price of used boats from Viko Yachts, for example the model, age and condition.

Sign up to our newsletter

By submitting this form, you agree to our Privacy & Cookie Policy

Change units of measure

This feature requires cookies to be enabled on your browser.

Show price in:

Show lengths, beam and draft in:

Show displacement or weight in:

Show capacity or volume in:

Show speed in:

Show distance in:

VIKO Yachts USA

North American Importer and Dealer of VIKO Yachts

With 30 years of experience in nautical manufacturing, VIKO Yachts are designed and built in Europe. Traditional workmanship meets modern solutions to produce cutting edge yachts at an affordable price point. 

Sign up to our newsletter and stay up to date

Subscribed!

Jachty: Viko S 21 - Mały, wygodny i tani

To jeden z najtańszych, małych, turystycznych jachtów kabinowych na rynku. Ceny Viko S 21, najnowszego modelu produkowanego przez poznańską stocznię Navikom (Viko Yachts), zaczynają się bowiem od 44 tys. zł + VAT (co daje ok. 54 tys. zł brutto).

Jednostkę zaprojektowało biuro konstrukcyjne stoczni jako trzeci już w linii nowych jachtów tej marki, po Viko S 22 i Viko S 30. Podobnie jak tamte, tak i ten narysowano, odrzucając zachowawczą i tradycyjną linię poprzedników. Zastosowano w nim łukowaty dziób o odwróconym pochyleniu oraz niemal pionowe: pawęż i burty na śródokręciu, do maksimum powiększając w ten sposób przestrzeń wewnątrz kadłuba. By złagodzić wizualnie wrażenie nieco masywnego kadłuba o wysokich burtach, projektanci zdecydowali się na niewysoką nadbudówkę o opływowych liniach, okienka (świetliki) w burtach, jak również solidne platformy dziobowe, estetycznie wkomponowane w kadłub. Te przydatne „kacze dzioby”, dostępne opcjonalnie, służą też do wychodzenia przez dziób na brzeg oraz do mocowania dodatkowych żagli przednich. Stocznia daje także szerokie możliwości wyboru kolorów żelkotu kadłuba.

Zobacz również: Motoprezentacje: Monte Carlo MC 4

Kokpit jachtu opracowano z myślą o pomieszczeniu w nim 4 – 6-osobowej załogi, dla której przygotowano podłużne przetłoczenie w podłodze zintegrowane ze stolikiem talii szotów grota, służące jako skuteczne podpórki pod nogi w przechyle. Na pawęży montuje się drabinkę kąpielową i tzw. pantograf pod silnik. Cumy, odbijacze, butle z gazem i inne rzeczy można chować w dwóch schowkach na pokładzie, jeden pod prawym siedziskiem w kokpicie, drugi na dziobie.

Wnętrze Viko S 21 przeznaczono dla czterech osób, dla których przygotowano dwie dwuosobowe koje – jedną na dziobie oraz drugą, poprzeczną hundkoję na rufie. Zabudowę wykonuje się tu w oparciu o wkładkę laminatową, co bardzo ułatwia utrzymanie czystości w środku. Pod każdą z koi znajdują się bakisty do schowania jedzenia oraz rzeczy osobistych załogi. Drobne rzeczy osobiste można też pochować w jaskółkach za oparciami. Standardowo nie przewidziano natomiast schowków pod kanapami – te przestrzenie zamyka się szczelnie, jako wypornościowe. Na życzenie można tu wyciąć otwory, wstawić pokrywy i korzystać z nich jak z bakist-kanap.

Wysokość stania w najwyższym miejscu wynosi 157 cm, a układ wnętrza jest standardowy – z rozkładanym stołem pośrodku, kanapami na burtach, malutkim kambuzem z umywalką, kilkoma jaskółkami i szafkami. Na tym niewielkim jachcie znaleziono też miejsce na zamykaną kabinę sanitarną, z możliwością umieszczenia w niej toalety chemicznej bądź służącą jako ociekacz do sztormiaków i kamizelek. Do zabudowy wnętrza wykorzystuje się standardowo drewno okuma (to gatunek mahoniu), ale można zamówić też inne gatunki.

Viko ma maszt i bom z polskiej firmy Mast, a żagle szyje do niego żaglownia Romana Knasieckiego. Jacht dostępny jest także w wersji zatokowej z podnoszonym ciężkim kilem, jak również z mieczem szybrowym, z przeznaczeniem do regat.

Wersje mieczowe są przy tym bardzo lekkie i łatwo przewozić je za zwykłym samochodem na przyczepie. W kolejnym numerze „Żagli” opublikujemy test Viko S21.

CHCESZ BYĆ NA BIEŻĄCO? POLUB ŻAGLE NA FACEBOOKU

OBSERWUJ NAS NA TWITTERZE

Materiał sponsorowany

Check our offer

• ALL INFORMATION
• ALL PRODUCTS

The modern trailer sailer with large cockpit and optional head compartment. The choice of swing, lift and fixed keels gives you an excellent range of cruising options.

VIKO S 21 introduced in 2015 is one of our most popular products, eagerly chosen by sailors for her immense versatility and dynamic performance under the sails. Being a lively sailboat with great maneuverability VIKO S 21 is a perfect match for those looking for a smart yacht with great potential.

Suitable both for sailing inlands as well as on the open waters, VIKO S 21 makes for a safe and reliable yacht, easy to sail and able to handle the most challenging conditions.

The galley as well as the interior layout color may be customized, while the boat herself is available in several ballast versions with fixed keel, lift keel or centerboard.

The efforts of VIKO S 21 designers focused on creating a construction capable of the highest quality performance, making her unique unit amongst the yachts of her category.

SPECIFICATION

MORE DETAILS?

Current time by city

For example, New York

Current time by country

For example, Japan

Time difference

For example, London

For example, Dubai

Coordinates

For example, Hong Kong

For example, Delhi

For example, Sydney

Geographic coordinates of Elektrostal, Moscow Oblast, Russia

City coordinates

Coordinates of Elektrostal in decimal degrees

Coordinates of elektrostal in degrees and decimal minutes, utm coordinates of elektrostal, geographic coordinate systems.

WGS 84 coordinate reference system is the latest revision of the World Geodetic System, which is used in mapping and navigation, including GPS satellite navigation system (the Global Positioning System).

Geographic coordinates (latitude and longitude) define a position on the Earth’s surface. Coordinates are angular units. The canonical form of latitude and longitude representation uses degrees (°), minutes (′), and seconds (″). GPS systems widely use coordinates in degrees and decimal minutes, or in decimal degrees.

Latitude varies from −90° to 90°. The latitude of the Equator is 0°; the latitude of the South Pole is −90°; the latitude of the North Pole is 90°. Positive latitude values correspond to the geographic locations north of the Equator (abbrev. N). Negative latitude values correspond to the geographic locations south of the Equator (abbrev. S).

Longitude is counted from the prime meridian ( IERS Reference Meridian for WGS 84) and varies from −180° to 180°. Positive longitude values correspond to the geographic locations east of the prime meridian (abbrev. E). Negative longitude values correspond to the geographic locations west of the prime meridian (abbrev. W).

UTM or Universal Transverse Mercator coordinate system divides the Earth’s surface into 60 longitudinal zones. The coordinates of a location within each zone are defined as a planar coordinate pair related to the intersection of the equator and the zone’s central meridian, and measured in meters.

Elevation above sea level is a measure of a geographic location’s height. We are using the global digital elevation model GTOPO30 .

Elektrostal , Moscow Oblast, Russia

• POWER Plant ID
• POWER Events
• Connected Plant
• Distributed Energy
• International
• COVID-19 Coverage
• Carbon Capture
• Climate change
• Cybersecurity
• Distributed Power
• Electric Vehicles
• Energy Storage
• Environmental
• Instrumentation & Controls
• Legal & Regulatory
• Legislative
• Ocean/Marine
• Physical security
• Plant Design
• Power Demand
• Research and Development
• Supply Chains
• Tidal Power
• Waste to Energy
• About POWER
• Privacy Policy
• Diversity, Equity, Inclusion & Belonging
• Accessibility Statement

New modification of Russian VVER-440 fuel loaded at Paks NPP in Hungary

DECEMBER 14, 2020 — After the recent refueling at power unit 3 of the Hungarian Paks NPP, its VVER-440 reactor has been loaded with a batch of fresh fuel including 18 fuel bundles of the new modification. The new fuel will be introduced at all four operating power units of the Paks NPP, and the amount of new-modification bundles in each refueling will be increased gradually.

Development of the new VVER-440 fuel modification was completed in 2020 under the contract between TVEL JSC and MVM Paks NPP Ltd. Its introduction would optimize the hydro-uranium ratio in the reactor core, enabling to increase the efficiency of fuel usage and advance the economic performance of the power plant operation. All VVER-440 fuel modifications are manufactured at the Elemash Machine-Building Plant, a facility of TVEL Fuel Company in Elektrostal, Moscow Region.

“Introduction of a new fuel is an option to improve technical and economic performance of a nuclear power plant without substantial investment. We are actively engaged in development of new models and modifications of VVER-440 fuel for power plants in Europe. The projects of the new fuels for Loviisa NPP in Finland, Dukovany NPP in the Czech Republic, Mochovce and Bohunice NPPs in Slovakia, are currently at various stages of implementation. Despite the same reactor model, these projects are quite different technically and conceptually, since we take into account the individual needs and requirements of our customers,” commented Natalia Nikipelova, President of TVEL JSC.

For reference:

The project of development and validation of the new fuel has been accomplished with participation of a number of Russian nuclear industry enterprises, such as OKB Gidropress (a part of Rosatom machine-building division Atomenergomash), Bochvar Institute (material science research facility of TVEL Fuel Company), Elemash Machine-building plant and Kurchatov Institute national research center. At the site of OKB Gidropress research and experiment facility, the new fuel passed a range of hydraulic, longevity and vibration tests.

Paks NPP is the only functioning nuclear power plant in Hungary with total installed capacity 2000 MWe. It operates four similar units powered by VVER-440 reactors and commissioned one by one in 1982-1987. Currently, Paks NPP is the only VVER-440 plant in the world operating in extended 15-monthes fuel cycle. The power plant produces about 15 bln kWh annually, about a half of electric power generation in Hungary. In 2018, the project of increasing the duration of Paks NPP fuel cycle won the European competition Quality Innovation Award in the nomination “Innovations of large enterprises”. Russian engineers from TVEL JSC, Kurchatov Institute, OKB Gidropress, Bochvar Institute and Elemash Machine-building plant provided assistance to the Hungarian colleagues in accomplishment of the project.

  TVEL Fuel Company of Rosatom incorporates enterprises for the fabrication of nuclear fuel, conversion and enrichment of uranium, production of gas centrifuges, as well as research and design organizations. It is the only supplier of nuclear fuel for Russian nuclear power plants. TVEL Fuel Company of Rosatom provides nuclear fuel for 73 power reactors in 13 countries worldwide, research reactors in eight countries, as well as transport reactors of the Russian nuclear fleet. Every sixth power reactor in the world operates on fuel manufactured by TVEL.  www.tvel.ru  

Turn Your Curiosity Into Discovery

Latest facts.

Follistatin344 Peptide Considerations

Approach for Using 5 Tips To Help You Write Your Dissertation

40 facts about elektrostal.

Written by Lanette Mayes

Modified & Updated: 02 Mar 2024

Reviewed by Jessica Corbett

Elektrostal is a vibrant city located in the Moscow Oblast region of Russia. With a rich history, stunning architecture, and a thriving community, Elektrostal is a city that has much to offer. Whether you are a history buff, nature enthusiast, or simply curious about different cultures, Elektrostal is sure to captivate you.

This article will provide you with 40 fascinating facts about Elektrostal, giving you a better understanding of why this city is worth exploring. From its origins as an industrial hub to its modern-day charm, we will delve into the various aspects that make Elektrostal a unique and must-visit destination.

So, join us as we uncover the hidden treasures of Elektrostal and discover what makes this city a true gem in the heart of Russia.

Key Takeaways:

• Elektrostal, known as the “Motor City of Russia,” is a vibrant and growing city with a rich industrial history, offering diverse cultural experiences and a strong commitment to environmental sustainability.
• With its convenient location near Moscow, Elektrostal provides a picturesque landscape, vibrant nightlife, and a range of recreational activities, making it an ideal destination for residents and visitors alike.

Known as the “Motor City of Russia.”

Elektrostal, a city located in the Moscow Oblast region of Russia, earned the nickname “Motor City” due to its significant involvement in the automotive industry.

Home to the Elektrostal Metallurgical Plant.

Elektrostal is renowned for its metallurgical plant, which has been producing high-quality steel and alloys since its establishment in 1916.

Boasts a rich industrial heritage.

Elektrostal has a long history of industrial development, contributing to the growth and progress of the region.

Founded in 1916.

The city of Elektrostal was founded in 1916 as a result of the construction of the Elektrostal Metallurgical Plant.

Located approximately 50 kilometers east of Moscow.

Elektrostal is situated in close proximity to the Russian capital, making it easily accessible for both residents and visitors.

Known for its vibrant cultural scene.

Elektrostal is home to several cultural institutions, including museums, theaters, and art galleries that showcase the city’s rich artistic heritage.

A popular destination for nature lovers.

Surrounded by picturesque landscapes and forests, Elektrostal offers ample opportunities for outdoor activities such as hiking, camping, and birdwatching.

Hosts the annual Elektrostal City Day celebrations.

Every year, Elektrostal organizes festive events and activities to celebrate its founding, bringing together residents and visitors in a spirit of unity and joy.

Has a population of approximately 160,000 people.

Elektrostal is home to a diverse and vibrant community of around 160,000 residents, contributing to its dynamic atmosphere.

Boasts excellent education facilities.

The city is known for its well-established educational institutions, providing quality education to students of all ages.

A center for scientific research and innovation.

Elektrostal serves as an important hub for scientific research, particularly in the fields of metallurgy, materials science, and engineering.

Surrounded by picturesque lakes.

The city is blessed with numerous beautiful lakes, offering scenic views and recreational opportunities for locals and visitors alike.

Well-connected transportation system.

Elektrostal benefits from an efficient transportation network, including highways, railways, and public transportation options, ensuring convenient travel within and beyond the city.

Famous for its traditional Russian cuisine.

Food enthusiasts can indulge in authentic Russian dishes at numerous restaurants and cafes scattered throughout Elektrostal.

Home to notable architectural landmarks.

Elektrostal boasts impressive architecture, including the Church of the Transfiguration of the Lord and the Elektrostal Palace of Culture.

Offers a wide range of recreational facilities.

Residents and visitors can enjoy various recreational activities, such as sports complexes, swimming pools, and fitness centers, enhancing the overall quality of life.

Provides a high standard of healthcare.

Elektrostal is equipped with modern medical facilities, ensuring residents have access to quality healthcare services.

Home to the Elektrostal History Museum.

The Elektrostal History Museum showcases the city’s fascinating past through exhibitions and displays.

A hub for sports enthusiasts.

Elektrostal is passionate about sports, with numerous stadiums, arenas, and sports clubs offering opportunities for athletes and spectators.

Celebrates diverse cultural festivals.

Throughout the year, Elektrostal hosts a variety of cultural festivals, celebrating different ethnicities, traditions, and art forms.

Electric power played a significant role in its early development.

Elektrostal owes its name and initial growth to the establishment of electric power stations and the utilization of electricity in the industrial sector.

Boasts a thriving economy.

The city’s strong industrial base, coupled with its strategic location near Moscow, has contributed to Elektrostal’s prosperous economic status.

Houses the Elektrostal Drama Theater.

The Elektrostal Drama Theater is a cultural centerpiece, attracting theater enthusiasts from far and wide.

Popular destination for winter sports.

Elektrostal’s proximity to ski resorts and winter sport facilities makes it a favorite destination for skiing, snowboarding, and other winter activities.

Promotes environmental sustainability.

Elektrostal prioritizes environmental protection and sustainability, implementing initiatives to reduce pollution and preserve natural resources.

Home to renowned educational institutions.

Elektrostal is known for its prestigious schools and universities, offering a wide range of academic programs to students.

Committed to cultural preservation.

The city values its cultural heritage and takes active steps to preserve and promote traditional customs, crafts, and arts.

Hosts an annual International Film Festival.

The Elektrostal International Film Festival attracts filmmakers and cinema enthusiasts from around the world, showcasing a diverse range of films.

Encourages entrepreneurship and innovation.

Elektrostal supports aspiring entrepreneurs and fosters a culture of innovation, providing opportunities for startups and business development.

Offers a range of housing options.

Elektrostal provides diverse housing options, including apartments, houses, and residential complexes, catering to different lifestyles and budgets.

Home to notable sports teams.

Elektrostal is proud of its sports legacy, with several successful sports teams competing at regional and national levels.

Boasts a vibrant nightlife scene.

Residents and visitors can enjoy a lively nightlife in Elektrostal, with numerous bars, clubs, and entertainment venues.

Promotes cultural exchange and international relations.

Elektrostal actively engages in international partnerships, cultural exchanges, and diplomatic collaborations to foster global connections.

Surrounded by beautiful nature reserves.

Nearby nature reserves, such as the Barybino Forest and Luchinskoye Lake, offer opportunities for nature enthusiasts to explore and appreciate the region’s biodiversity.

Commemorates historical events.

The city pays tribute to significant historical events through memorials, monuments, and exhibitions, ensuring the preservation of collective memory.

Promotes sports and youth development.

Elektrostal invests in sports infrastructure and programs to encourage youth participation, health, and physical fitness.

Hosts annual cultural and artistic festivals.

Throughout the year, Elektrostal celebrates its cultural diversity through festivals dedicated to music, dance, art, and theater.

Provides a picturesque landscape for photography enthusiasts.

The city’s scenic beauty, architectural landmarks, and natural surroundings make it a paradise for photographers.

Connects to Moscow via a direct train line.

The convenient train connection between Elektrostal and Moscow makes commuting between the two cities effortless.

A city with a bright future.

Elektrostal continues to grow and develop, aiming to become a model city in terms of infrastructure, sustainability, and quality of life for its residents.

In conclusion, Elektrostal is a fascinating city with a rich history and a vibrant present. From its origins as a center of steel production to its modern-day status as a hub for education and industry, Elektrostal has plenty to offer both residents and visitors. With its beautiful parks, cultural attractions, and proximity to Moscow, there is no shortage of things to see and do in this dynamic city. Whether you’re interested in exploring its historical landmarks, enjoying outdoor activities, or immersing yourself in the local culture, Elektrostal has something for everyone. So, next time you find yourself in the Moscow region, don’t miss the opportunity to discover the hidden gems of Elektrostal.

Q: What is the population of Elektrostal?

A: As of the latest data, the population of Elektrostal is approximately XXXX.

Q: How far is Elektrostal from Moscow?

A: Elektrostal is located approximately XX kilometers away from Moscow.

Q: Are there any famous landmarks in Elektrostal?

A: Yes, Elektrostal is home to several notable landmarks, including XXXX and XXXX.

Q: What industries are prominent in Elektrostal?

A: Elektrostal is known for its steel production industry and is also a center for engineering and manufacturing.

Q: Are there any universities or educational institutions in Elektrostal?

A: Yes, Elektrostal is home to XXXX University and several other educational institutions.

Q: What are some popular outdoor activities in Elektrostal?

A: Elektrostal offers several outdoor activities, such as hiking, cycling, and picnicking in its beautiful parks.

Q: Is Elektrostal well-connected in terms of transportation?

A: Yes, Elektrostal has good transportation links, including trains and buses, making it easily accessible from nearby cities.

Q: Are there any annual events or festivals in Elektrostal?

A: Yes, Elektrostal hosts various events and festivals throughout the year, including XXXX and XXXX.

Was this page helpful?

Our commitment to delivering trustworthy and engaging content is at the heart of what we do. Each fact on our site is contributed by real users like you, bringing a wealth of diverse insights and information. To ensure the highest standards of accuracy and reliability, our dedicated editors meticulously review each submission. This process guarantees that the facts we share are not only fascinating but also credible. Trust in our commitment to quality and authenticity as you explore and learn with us.

Share this Fact: