28 foot catamaran center console

• No results were found.

28 Molokai Power Catamaran

Introducing the Aquila 28 Molokai. The incredible ride, inspired by native Hawaiian watercraft, is born from the rigors of island hopping in the tumultuous waters of the Pacific Ocean, making the Aquila 28 Molokai Power Catamaran perfectly suited for almost any boating condition. 

The impressive stability and formidable ride along with the large aft and forward cockpits make the Aquila 28 Molokai ideally suited for offshore fishing with family and friends, tournament competition, and even professional charter sportfishing. And, although the Aquila 28 Molokai Power Catamaran is primarily designed as a fishing platform, family-friendly features abound.  

When not being used for offshore fishing or diving, friends and family can enjoy other waterborne activities, including tow sports, or just relax onboard while visiting a favorite dockside restaurant, sand bar, or island. Lounge on the bow seating area or pull up the bow table and enjoy your favorite beverage at sunset with up to 10+ guests onboard.  

Because the hulls are spaced wide apart, the broad stance makes it easy to walk around both sides of the center console. The position of the center console provides a 360-degree line of sight with controls strategically positioned for ease of operation. The extra-large console dash is designed to support two large multifunction displays along with the Mercury® engine monitoring displays and Fusion® sound system head unit. 

The Molokai is truly a versatile boat that amplifies your boating lifestyle. 

Download Brochure

Request Information

28 molokai in action.

Full In-Depth Walkthrough

Fishing Lifestyles

Discover the Aquila 28 Molokai

The incredible ride, inspired by native Hawaiian watercraft, is born from the rigors of island hopping in the tumultuous waters of the pacific, making the Aquila 28 Molokai Power Catamaran perfectly suited for extreme offshore adventures, fishing outings, and family fun.

External Evaluation

Aquila 28 Molokai Test Video - By BoatTEST.com

Aquila 28 Molokai | Walkthrough with Dan Jones

Aquila 28 Molokai | Walkthrough with Boat Trader

Join Boat Trader and Ryan McVinney for a full, independent walkthrough review of a new 2022 Aquila 28 Molokai power catamaran boat. The Molokai is truly a versatile boat that amplifies your boating and fishing lifestyle.

A Fresh Evolution of Classic Boating Traditions

Specifications

• DOWNLOAD SPECS

Aquila Models

Aquila 70 Luxury

Aquila 54 Yacht

Aquila 47 Molokai

Aquila 44 Yacht

Aquila 42 Yacht

Aquila 36 Sport

Aquila 32 Sport

Aquila 28 Molokai

Aquila 28 Molokai Cuddy

• Build Your World Cat
• Find A Dealer

• Cats Vs Mono
• Manufacturing Excellence
• A Better Way To Boat
• Custom Yacht Division
• Testimonials
• Cat'n Around (Blog)
• 2024 Flip Book - View/Download
• 2024 Full Line Brochure - View/Download
• 25th Anniversary Commemorative Catalog - View/Download
• Owner’s Gallery
• World Cat Premiere Event
• Experience World Cat and A Better Way to Boat
• Event Calendar
• Cat’n Around Owners’ Events
• Current Promotions
• Monthly Newsletter
• Media Coverage
• Privacy Policy
• Take The Ultimate Sea Trial
• Request A Brochure

• Register Your World Cat
• Owner’s Manuals
• Parts Ordering
• Contact Your Dealer
• How-To Videos

Stay in the Know with World Cat

" * " indicates required fields

Where You Do Your Boating

Center console.

SPECIFICATIONS

LOA: 32’2″ Beam: 10’6″ Hull Draft: 16″ Freeboard Aft: 28″ Transom Height: 25″ Fuel Capacity: 279 gal (2 x 139.5) Max HP Rating: 800 HP (2 x 400 HP) Dry Weight w/Power (Approx.)*: 10,100 lbs w/ twin 300’s Trailering Height**: 10’6″ Bridge Clearance: 9’0″ Cockpit Length: 54″ Freshwater Capacity: 20 gal Wastewater Capacity: 15 gal Typical Cruise***: 28.3 mph / 1.47 mpg Typical WOT***: 52.2 mph / 1.0 mpg

* Includes max power and typical options ** Measured keel to top of fiberglass hardtop with no outriggers nor electronics installed (not including trailer itself) *** Tested with max power, two people, 1/2 fuel, no gear

Molded-in bow pulpit with roller and cleats

Pro Series free-fall windlass with 300’ line, 15’ chain, 22lb anchor, and foot switches

Anchor locker with 2 hatches and raw water washdown

Bow seating w/ cushioned backs for 6 adults

Insulated 225 qt. port and starboard storage compartments w/ overboard drains for use as fish boxes, coolers, or dry storage

Forward facing backrests

Fiberglass top w/ powdercoated aluminum frame, radio box w/ overhead electronics panel, overhead LED lights, 5 rocket launchers, and spreader lights

Port and starboard lockable rod storage compartments accomodate 3 offshore rods per side

Console marine head with 15 gal. holding tank and overboard discharge

Fiberglass console w/ electronics area capable of (2) 16” screen, netted storage compartments, 2 stainless steel cup holders, passenger handrail, footrest, and insulated storage compartment

Deluxe captain’s helm chairs w/ armrests and dual flip-up bolsters

Fiberglass leaning post tackle center w/ sink, 45 gal. insulated raw water livewell w/ 1100 pgh magnetic drive pump, overboard drain, and a clear lid

Insulated 300 qt. port and starboard in-deck fish boxes w/ diaphragm pumps

(12) gunwale-mounted SMITH stainless steel rod holders

Walk-through transom w/ heavy-duty door, bait prep, and tool storage

Large swim platform and user-friendly On-Ramp swim ladder

SHARE THIS PAGE WITH A FRIEND

Ready to get started?

Designed with a singular vision...To deliver unmatched performance and efficiency!

Introducing the insetta 35ifc  – the bar has been raised.

The Insetta 35IFC was designed with a singular vision… to be the best-performing center console sport fishing catamaran in its class.  Enjoy unmatched performance, range, and efficiency thanks to the 35IFC’s hydrofoil-assisted design.

In addition to being the best High-Performance Fishing Catamaran in its class, it also provides a smoother and dryer ride in the rough stuff!

This boat was designed for people who fish, by people who fish!  From its integrated livewells to its cavernous coffin boxes, level open deck layout, massive insulated storage and so much more, this boat was designed for maximum range and fishability!

Here’s what our customers have to say: “Holy crap do I love my 35 IFC with the Merc 300 V8’s on the back. We ran her down to Key Largo the other day, snorkeled all day, got lunch at Shipwrecks Bar and Grill, and ran back. Cruised between 40 and 45 mph, mostly around 42. So smooth it’s nuts. Burned maaaayyybe 40 gallons for the whole day. As we cruised the dashboard was telling us between 1.7 and 1.8 mpg, but I’m pretty sure we cruised more than 40 miles and burned between 35 and 40 gallons, no more. So… suffice it to say that you guys have absolutely crushed it and changed the game here. Fantastic work”! – Alan, Hull #4

Check out our FAQ’s section below for more about the Insetta 35 with  IFC!

Specifications

Length Overall

Maximum Beam

Maximum Draft

Fuel Capacity

Cruise Speed

Cruise Miles Per Gallon (MPG)

Over 850 miles*

Cruise Range

Standard Features

Standard “Insetta White” Gelcoat Molded in Diamond Non-Skid Tackle Storage Stbd Side Tackle Storage Port Side 19 Gallon Freshwater Washdown/Shower 5 x In Deck Storage Hatch 2 x In Deck Macerated Fish Boxes 625 Qt Insulated Coffin Box, Split Boxes Walk through Transom Access (Door Optional) Two 36 gallon Integrated Transom Livewells Fresh and Raw Water Washdown 34 Rod Holders (gunnels and coffin box) 7 Stainless Gemlux Pull-Up Cleats LED Navigation Lights Boarding Ladder

Recessed Stainless Bow Rail

Helm / Console

Fiberglass Hardtop with Powder Coated Aluminum Supports Tempered Safety Glass Enclosure for Console 6 Integral Rod Holders Built into Rear Support Molded Fiberglass Leaning Post with Rear Face Seating and cooler 3 Wide Helm Seats 6 S/S Cup Holders Storage Box and Rigging Tray on Rear Facing Seat Storage Drawers Under Helm Seats 165 Qt Leaning Post Ice Box Located Under Rear Face Seats

Base Upholstery

Equipment and Electronics

3 Part Internal Foil System

3 Pump Capacity Sea Chest with Dual Livewell Pumps & Raw Water Feed

4 1100 GPH Bilge Pumps (2 in Each Sponson)

Standard Capacities

490 gallon fuel capacity.

625 Qt Insulated Coffin Box with Divider

165 Qt Leaning Post Ice box

Dual 36 Gallon Livewells

19 Gallon Freshwater

Frequently Asked Questions

IFC is Insetta Boatwork's Internal Foiling System.

You can expect a significant increase in cruise speed; Improved handling and stability in rough conditions; Better acceleration; A boat that is less affected by increased payload; A 20-40% increase in fuel efficiency; and a 20-40% further cruise range! Additionally, the IFC technology will also provide a drier ride in choppy conditions and Provide for more responsiveness when turning at speed!

The system is a fixed setup, there is nothing to operate and there are zero moving parts.

The IFC Technology in effect smooths out rough seas by allowing the boat to run from wave crest to wave crest at a relatively smooth and stable attitude. The IFC System creates lift which help to in effect “Carry” the hull higher in the water. The system acts as a set of wings carrying the boat at speed, keeping the hull from having to follow each wave across its entire contour. In other words the surface of the waves have less effect on the hull as the IFC system is lifting the boat. Additionally, the aerodynamic lift created by the catamaran hulls creates even more lift at the bow of the boat, keeping the nose high and preventing the “slamming” or sneezing found in other catamaran hulls.

No, you don’t. The foils are flush mounted to the bottom of the keels of each sponson (as well as up in the tunnel.) At its centerline the main foil of the IFC system is only slightly lower than the keel line. The boat will easily load onto a standard catamaran trailer. There is no big contraption hanging way down under the boat.

Remember, the foils are INTERNAL to the tunnel. At its lowest point the main foil is only slightly lower than the hull and is higher than the props. Because of this the odds of striking the foils are extremely low. The boat is designed to be lifted by the foil. The structural integrity of the foil system is such that the weight of the boat could be supported many times over by the foil. As such, if you did somehow manage to strike the foil on something EXTREMELY SUBSTANTIAL, like a stone shoal, the likely outcome is that you may (in a very worst case scenario) bend or break a foil wing. If that were to happen, you could still operate the boat to port with the remaining foils. The IFC foils are made from a very high-grade stainless steel and designed to meet or exceed relevant guidelines for impact and strength.

As water travels through the tunnel and around the foil, a tremendous vortex is created. This force keeps most debris from being trapped in the tunnel or around the foil. Between the pressure of the air moving through the tunnel, and the vortex created in the water, the tunnel and foils will stay clean and clear.

The outboards of the 35 IFC are mounted on a slight outward angle to place the propellers properly to maximize the thrust and flow efficiency created as the water travels through the tunnel and around the foils. This mounting also helps the boat to lean into a corner, much like a monohull.

Firstly, we’d ask, “Why would you want to?” But the short answer is no. IFC is an integrated system that is integral to the design of the boat.

The short answer is that boats with technology similar to IFC have been in use for many years, but not in the recreational market. Commercial and Military applications are quite prevalent. The initial design of a hull and system like this is quite complex and can be cost prohibitive. We at Insetta feel the gains in efficiency, speed, range and ride quality far outweigh the initial design and build cost.

Upon deciding to build a foiling Cat, Insetta assembled a team of naval Architects and Marine Engineers to refine an existing and proven design. Using their own state of the art construction techniques, Insetta brought an application specific version to the fiberglass Center Console market.

Optional Features

Customizable Garmin or Simrad Electronics JL Audio 10 Speaker Stereo System Flush Mount Acrylic Helm Bow Shade Custom Gelcoat or Combination of Colors Deluxe Upholstery Third Center Livewell Under Rear Facing Seat 40 gallon Seadek Flooring or Flexiteek Decking Additional Gunnel Rod Holders (18 standard) Recessed Wireless Phone Chargers Swivel Base Rod Holders Outlets for Electric Reels Additional Drink Holders on Leaning Post, Coffin Box, Gunnels and Helm Forward/Rear/Side Spreader Lights T-Top Outrigger Bases/Poles Gemlux Electric Head With 19 Gallon Blackwater Holding Tank Freshwater Sink and Vanity Inside Console Underwater Lights Heavy Duty Dive Ladder LED Under Gunnel Lighting On-Board Battery Charger Windlass Custom Aluminum Trailer Cockpit Table/Bow Table

Why did Insetta Boatworks decide to build a boat with IFC?

For decades, Hydrofoil power boats have proven to be the most efficient craft for a variety of offshore operations.

While pursuing a B.S. in physics in 1960, Victor Insetta was employed doing anti-submarine research that utilized high speed Deep-V patrol boats equipped with hydrofoils. Their ability to pursue submarines at high speed, operate safely offshore, and, being foil borne: allowed their hull to run clear of the water avoiding direct hits from torpedoes. Decades later, Vic and his family rode comfortably on hydrofoil ferries in Italy, flying over white capped waves in the bay of Naples.

In 2017, The Insetta 45 was chosen to be the official chase boat of the America’s cup! Four 45’ Insetta’s catamarans were shipped to Bermuda to assist at various cup events. Sailboats, competing from several countries, were catamarans with hydrofoils ! The Insetta 45’s ran parallel to these “foiling sail cats” to assist with TV coverage. The sailing cats were traveling at speeds approaching 50 mph, 2 ½ times the wind speed . Efficient … you bet . They could also turn on a dime at over 40 mph…

It became obvious: that a foiling cat would make a great offshore outboard power boat… Many foil power boat designs in the past, had wide foils that stuck out the sides, increasing their beam and draft. It made them difficult to dock, and they couldn’t operate in shallow waters. Joel Shine (chief operating officer) of Insetta Boatworks found a catamaran design that had hydrofoils mounted in the tunnel, (that location between the tunnel walls actually improves their efficiency), and does not add to its draft. Further improvements could be added by using our ultra-light high strength infused composite construction.

Joel, Vic and our technical staff reviewed the foiling cat’s initial specifications and performance data, and then sea trialed two foiling cats with internal hydrofoils. Our staff includes a second physicist and pilot… Glen Dobbs. We are all active boaters and we determined we would build our version of a foiling outboard powered cat. We contacted a Naval architect, who designed several successful foiling power cats . He is now a member of our technical staff.

Our 35 “foiling cat” design has set the standard for Foil-Assisted Sportfishing boats. The hull, foils, materials, and engines are synergistically combined, to provide: unrivaled high-speed cruising efficiency , and provide safe offshore handling, with unimpeded shallow water operation, including beaching, without foils or props contacting the bottom.

Insetta 35IFC

The premier internal foiling catamaran.

Integrated 36 Gallon Livewells & 625 QT Coffin Box Standard

Designed to fish.

850+ Mile Range!

Best in Class MPG, Smoother/Dryer Ride!

Performance.

Click the button below to contact or email us for more info!

Latest News

The Foiling Press – September 2023

The Foiling Press – September 2023 – September was an awesome month! We’ve wrapped up a successful…

The Foiling Press – August 2023

The Foiling Press – August 2023 – August was an interesting month for…

The Foiling Press – July 2023

The Foiling Press – July 2023 – July was a great month for the Insetta Boatworks team and…

The Foiling Press – June 2023

The Foiling Press – June 2023 – It’s officially summer, and that means…

2023 Insetta 35IFC (SOLD)

If you’ve been wanting to get into a 35IFC without the wait, this is your chance! Even…

The Foiling Press – February 2024

The Foiling Press – February 2024 – February was a busy month for…

The Foiling Press – January 2024

We kicked off the year with a full house here at Insetta Boatworks! Three beautiful 35IFC’s in…

Get the Latest Insetta News!

• First Name *
• Last Name *

Share this page

Looking for our latest catalog?

Whether it’s a day of water sports, island hopping, or simply enjoying the open water, our 28-foot dual-console catamaran is the perfect platform for family adventures and unforgettable experiences.

Over 450 square feet of deck space, 2500 quarts of insulated storage, 150 gallon capacity of our livewells, and up to 1800HP prepare you for endless adventure.

STAY DRY, ENJOY THE RIDE, FEEL THE DIFFERENCE…

Join over 7000 Twin Vee owners from around the World. Feel confident that you’re purchasing one of the most stylish, highest quality, and best performing boats in the marine industry.

WHEN WE SAY, “THE BEST RIDING BOAT ON THE WATER,” We Mean It. It’s in our DNA!

Twin Vee PowerCats Co. Commences Production of New 340 GFX Boat

Twin Vee PowerCats Co. Announces Closing of Initial Public Offering

Twin Vee 240 Center Console Featured in August Issue of Rudow’s Fishtalk Magazine

Build Your Twin Vee

" * " indicates required fields

Step 1 of 6

Contact A Dealer

Step 1 of 7

Hull and Deck

• (2) 475 Quart Coffin Box Tubs with Raised Stainless Steel Insert
• (2) 700 Quart In Floor Fish Boxes with Macerators
• 10” Stainless Steel Pull-up Cleats – (6)
• 360 – Degree Walk Around Fishability
• Above Deck Live Wells
• Anchor Locker with Fender storage
• Bilge Access Thru Mechanical Room Hatches in Cockpit
• Cup holders: Stainless Steel (10)
• Drain covers: stainless steel w/Twin Vee Logo
• Electric Reel Outlets (4)
• Folding Transom Dive Ladder
• Foldout Tackle and Gear Storage Port and Starboard
• Fuel Cells “Florida Marine Tanks” 375 Gallon each x Fuel Level Sensors
• Gel Coat Colors: Ice Blue, Seafoam, Whisper Gray or White
• Grip Tek – yacht-style non-skid 
• Integrated Digital Switching System
• LED Courtesy lights throughout, Blue 
• Lewmar Stainless VX2 GO 700w Windlass
• Pop Up 3 ½” Fender Cleats (6)
• Rear Facing Tackle Station with Drawers
• Resin Infusion Construction for all Fiberglass Parts w/ Carbon Fiber support for strength
• Rod holders: (20) Stainless Steel – 10 per side Gunwale & (8) on Aluminum T-Top connect piece
• Rod Holders: Aluminum transom mounted “Euro” rod holders 10 total (5) each port/stbd
• Rub Rail: Thick Flexible rub rail with insert, white or black
• Stainless Marine Outboard Brackets
• Stainless Steel Bow and Stern Tow Eyes – (3)
• Stainless Steel Bow Roller
• Starboard Side Tuna/Dive Door
• Tension hinges: Stainless and Brass
• Thru hulls: Stainless Steel
• Transom Swim/Fish/Sun platform 
• Twin Vee logos, Model Designator logo 
• Under Gunwale Rod Racks Port and Starboard
• Underwater LED lights 
• Upper Bow Storage with Molded Fiberglass Hatches
• Wash down: Raw water washdown, stern

Console, Helm & T-Top Features

• 3 Bank battery charger
• 3 Spoke Polished Stainless Steering Wheel w/ Turning Knob
• ABYC Standard Fire extinguisher
• Acrylic Dash Panel w/ extra-large surface area for electronics
• AGM Sealed Batteries 
• All Digital Switch panel: Gloss Black Panel push buttons [blue LED lights/red in use], USB, and 12v receptacle with circuit breaker protection
• Battery selector with on/off switches (2)
• Console Accessory Storage with USB Ports
• Electric Marine Horn
• Freshwater Marine Head with Macerator
• Fully Enclosed Tempered and Tinted Glass Windshield
• Ritchie Voyager Compass
• Seastar All Electric Steering 
• White Powder Coated Aluminum Doors Port/Starboard

T-top Features

• Aluminum Powder Coat Gloss/Textured (White or Black)
• Electric motorized anchor light/electric antenna mount
• Flood/Search Light Bar LED, forward & aft, 10,000+ lumens- independently switched
• Integrated Powder Coated Aluminum T-top system, flush mounted onto the console
• LED Cockpit and Compartment Accent Lighting Throughout
• Molded Fiberglass Hardtop w/ Radio Box and Rocket Launchers 
• Motorized Anchor and Antenna Mount 316 Stainless Steel Hardware 
• Spreader Lights with 360 Degree Lighting

Livewells, Pumps & Storage

• “Hooker” Live well Sea Chest with Variable Speed Pumps 
• 2000 GPH Bilge Pumps with “Ultra Safety” Bilge Switch (4)
• Coffin insulated storage/fish boxes – forward-facing/upholstered chaise lounge seating
• Freshwater Washdown in Bow
• Raw Water Washdown Pump
• Twin transom live wells (45gal), (1 ea.) port & stbd

Seating and Upholstery

• Bow Storage, Insulated and Dry, with Hatches, Friction Hinges
• Entertainment Center Stainless Steel Sink with Bait Prep and Freshwater Washdown
• Forward Facing Console Lounge Seating
• Premium Triple Captain Helm Chairs with Second Row Seating 
• Premium GG Schmitt aft seating w/ polished stainless-steel port/stbd

40′ 0″

12′ 0″

FUEL CAPACITY

750 Gallons

DRY WEIGHT w/ Engines

COG from Bow

LIVEWELL CAPACITY

FLIBS Sign up

YOUR INFORMATION

YOUR ADDRESS

YOUR INTERESTS

BOAT OWNERSHIP

• 27′ Gen 2
• 31′ AmeraCat
• Commercial Cats
• 27′ Gen II
• Fish Pictures
• Charter an AmeraCat
• Our Build Process
• Accessories

2020 AmeraCat Gen II

Offshore center console catamaran.

AmeraCat took the original 27′ Gen 1 back to the drawing board in 2014 and changed things up a bit to make our fishing cat faster, smoother and more fuel efficient. We added higher gunnels, more displacement and managed to give our Center Console Catamaran even more space by increasing the beam to 9′. The 27′ Gen II is perfect for any recreational or commercial use and can be fully customized to meet any needs. With great handling from this center console fishing catamaran, you will not only have the softer ride but docking the 27′ Gen II is a breeze. All AmeraCat boats are made to order in our factory in South Florida so any customization is available. We believe that your boat should be built your way! If you are interested in getting more information or scheduling a sea trial on one of our Center Console Fishing Catamarans, use the Contact Us page or call us anytime. Below are a few images of the Gen II that give examples of the most popular options that other AmeraCat owners chose.

Specifications:

• Aprox. Dry Hull Weight-3340 lbs
• LOA- 27′ 2”
• Max HP- 600hp
• Fuel Gallons- 150/160 gallons
• Hull Draft- 14′
• STD Livewell Capacity: 50 Gal
• STD Fishbox Capacity: Approx. 300 Quarts
• Freeboard AFT:
• Freeboard Bow:
• Trailering Height: 

The 27′ Gen II is our most popular center console model. It’s designed perfectly for offshore fishing, diving or a nice cruise on the water with the family. The 27′ Gen II is lightweight, roomy, extremely stable in rough seas and it’s the perfect fit for law enforcement, government or any other commercial use. With many different options to choose from such as gunnel mount rod holders, dive ladder, outriggers, downriggers or even a few extra cup holders, you can customize an AmeraCat to fit your every need.

With a max horsepower of 500, you have a wide variety of twin engines to choose from that will get you to the fishing grounds fast, safe and most importantly, DRY. The 27′ Gen II can comfortably fish up to 6 anglers with plenty of room for tackle, live bait, fish boxes and coolers. Just like all the models in the AmeraCat lineup, the 27′ Gen II is an offshore fishing catamaran that is built with NO WOOD and cuts through the waves like a knife.

You will not only be amazed at the amount of room and storage you get with the Gen 2, but with upgrades like outriggers, an aluminum T-top, and anything else you can imagine, this catamaran can be fully stocked for an unbelievable price. At AmeraCat we offer the most affordable offshore fishing catamarans on the market.

Ready to get in touch with us to schedule demo ride of the 27′ Gen II? Use our Build A Boat form to get a general quote and let us know what custom upgrades you want for your new Fishing Catamaran. We can also be reached during normal business hours by phone at (772) 359-3641 or 24/7 via email at [email protected] . We look forward to hearing from you!

With AmeraCat, you are always dealing directly with the manufacturer not a dealer. This allows you to get factory direct pricing and not to mention, no one can answer questions like the creator! Having all the options you want added during the initial construction of the boat allows you to save money, time and the hassle of having to take your new boat to the shop just to have accessories installed.

Not located in our area? We also offer delivery of your brand new center console fishing catamaran at a reasonable rate. We also take trade-in of your existing boat, and we give you the highest possible amount with your trade-in towards your new AmeraCat*

The 27′ Gen II not the right size boat for you? Check out some of the other center console fishing catamarans we offer.

• 25′ Single Engine AmeraCat

Search Our Site

• Aprox. Dry Hull Weight- 2860 lbs
• LOA- 25′ 5”
• Beam- 8′ 6"
• Max HP- 350hp
• Fuel Gallons- 85 gallons
• Hull Draft- 15'
• STD Livewell Capacity: 45 Gal
• STD Fishbox Capacity: 200 Quarts
• Hull Draft- 14'
• Aprox. Dry Hull Weight- 4850 lbs
• LOA- 31′ 0”
• Beam- 9′ 10"
• Max HP- 800hp
• Fuel Gallons- 265 gallons
• STD Livewell Capacity: 60 Gal
• STD Fishbox Capacity: Approx 400 Quarts

Caught on an AmeraCat!

Privacy Overview

bluewater 2850

Bluewater 2850 Specs

Bluewater 2850 equipment, bluewater 2850 walkthrough.

Unrivaled Offshore Performance

The Bluewater 2850 Center Console is built for those who understand the sea's demands. With a 31-foot length and a wide 9-foot 5-inch beam, this vessel excels offshore and provides an exceptionally stable fishing platform, even in rough waters.

DESIGNED FOR FISHING AND MORE

Featuring the largest cockpit in its class, the 2850 is packed with fishing features, from ample storage and tackle capacity to a spacious aft cockpit for a great day on the water. With a 24-degree deep vee hull and high gunnels, the 2850 ensures a flat, smooth, and dry ride that will take you comfortably and confidently to your favorite fishing spots.

YOUR CUSTOMIZED ADVENTURE

Whether you're fishing, diving, or cruising with family, think of the 2850 as your first-class ticket to fun on the water. Bluewater offers customization options to match your style, ensuring you get the boat that perfectly suits your needs.

Boats to Last a Lifetime Find the Bluewater That’s Built For You

Bluewater 2150

Bluewater 355e

Bluewater 23t

Bluewater 2550