small sailboat layout

• BOAT OF THE YEAR
• Newsletters
• Sailboat Reviews
• Boating Safety
• Sailing Totem
• Charter Resources
• Destinations
• Galley Recipes
• Living Aboard
• Sails and Rigging
• Maintenance

20 Best Small Sailboats for the Weekender

• By Mark Pillsbury
• Updated: May 24, 2024

In order to go cruising, most of us require a sailboat with a head, a galley, and bunks. The boat, likely a 30-footer and more often a 40-footer, will have electronics for navigation and entertainment, refrigeration if the trip is longer than a coastal hop, an engine for light wind, and, depending on our appetites for food and fun, perhaps a genset to power our toys and appliances.

To go sailing , however, all we really need is a hull, mast, rudder, and sail. To experience the pure joy of sheeting in and scooting off across a lake, bay, or even the open ocean, there’s nothing better than a small sailboat – we’re talking sailboats under 25 feet. You can literally reach out and touch the water as it flows past. You instantly feel every puff of breeze and sense every change in trim.

Some of the boats in this list are new designs, others are time-tested models from small sailboat manufacturers, but every one is easy to rig, simple to sail, and looks like a whole lot of fun either for a solo outing on a breezy afternoon or to keep family and friends entertained throughout your entire sailing season. This list is made up of all types of sailboats , and if you’re looking for a list of some of the best small sailboats for beginners, you’ll find exactly that here.

Any one of these popular boats could be labeled as a trailerable sailboat, daysailer, or even a weekender sailboat. And while most would be labeled as a one or two person sailboat, some could comfortably fit three or even four people.

– CHECK THE WEATHER – The weather changes all the time. Always check the forecast and prepare for the worst case. Safety Tip Provided by the U.S. Coast Guard

Marblehead 22 Daysailer

If you have an eye for elegant lines and your heart goes pitter-patter over just the right amount of overhang beneath a counter transom, the Marblehead 22 daysailer, designed by Doug Zurn and built by Samoset Boatworks in Boothbay, Maine, will definitely raise your pulse. Traditional-looking above the waterline and modern beneath, the cold-molded hull sports a deep bulb keel and a Hall Spars carbon-fiber mast with a wishbone rig and square-top main. The 11-foot-9-inch cockpit can seat a crowd, and a small cuddy forward will let you stow your friends’ gear for the day. samosetboatworks.com

Catalina 22 Sport

Many a harbor plays host to an active fleet of Catalina 22s, one of the most popular small sailboats over the years, given its basic amenities and retractable keel, which allows it to be easily trailered. Recently, the company introduced the Catalina 22 Sport, an updated design that can compete with the older 22s. The boat features a retractable lead keel; a cabin that can sleep four, with a forward hatch for ventilation; and a fractional rig with a mainsail and a roller-furling jib. Lifelines, a swim ladder, and an engine are options, as are cloth cushions; vinyl cushions are standard. The large cockpit will seat a crowd or let a mom-and-pop crew stretch out and enjoy their sail. It’s clear why the Catalina 22 is one of the best sailboats under 25 feet. catalinayachts.com

With its large, open-transom cockpit and sloop rig, the Hunter 22 makes a comfortable daysailer for family and friends. But with its cuddy cabin, twin bunks, optional electrical system, opening screened ports, and portable toilet, a parent and child or a couple could comfortably slip away for an overnight or weekend. Add in the optional performance package, which includes an asymmetric spinnaker, a pole, and a mainsheet traveler, and you could be off to the races. The boat features a laminated fiberglass hull and deck, molded-in nonskid, and a hydraulic lifting centerboard. Mount a small outboard on the stern bracket, and you’re set to go. marlow-hunter.com

Not sure whether you want to race, cruise or just go out for an afternoon sail? Since 1958, sailors have been having a ball aboard the Uffa Fox/George O’Day-designed Daysailer. Fox, who in the 1950s was on the cutting edge of planning-dinghy design, collaborated with Fall River, Massachusetts boatbuilder O’Day Corp. to build the 16-foot Daysailer, a boat that features a slippery hull and a small cuddy cabin that covers the boat roughly from the mast forward. Thousands of Daysailers were built by various builders, and they can be found used for quite affordable prices. There are active racing fleets around the US, and new Daysailers are still in production today, built by Cape Cod Ship Building. capecodshipbuilding.com

BayRaider from Swallow Boats

Easy to rig and trailer, the BayRaider from England’s Swallow Yachts is a relative newcomer to the small-boat market in the United States. Nearly all of its 19 feet 9 inches is open cockpit, though a spray hood can be added to keep the forward sections dry. The BayRaider is ketch-rigged with a gunter-style mainmast. The topmast and mizzen are both carbon-fiber, which is an option for the mainmast as well. The BayRaider can be sailed with a dry hull in lighter conditions or with 300 pounds of water ballast to increase its stability. With the centerboard and hinged rudder raised, the boat can maneuver in even the thinnest water.

$28,900, (904) 234-8779, swallowyachts.com

Big fun can come in small packages, especially if your vessel of choice happens to be the 12 ½-foot Beetle Cat. Designed by John Beetle and first built in 1921, the wooden shallow draft sailboat is still in production today in Wareham, Massachusetts at the Beetle Boat Shop. With a draft of just 2 feet, the boat is well-suited for shallow bays, but equally at home in open coastal waters. The single gaff-rigged sail provides plenty of power in light air and can be quickly reefed down to handle a blow. In a word, sailing a Beetle Cat is fun. beetlecat.com

– LEARN THE NAVIGATION RULES – Know the “Rules of the Road” that govern all boat traffic. Be courteous and never assume other boaters can see you. Safety Tip Provided by the U.S. Coast Guard

West Wight Potter P 19

With berths for four and a workable galley featuring a cooler, a sink, and a stove, West Wight Potter has packed a lot into its 19-foot-long P 19. First launched in 1971, this is a line of boats that’s attracted a true following among trailer-sailors. The P 19′s fully retractable keel means that you can pull up just about anywhere and go exploring. Closed-cell foam fore and aft makes the boat unsinkable, and thanks to its hard chine, the boat is reportedly quite stable under way. westwightpotter.com

NorseBoat 17.5

Designed for rowing and sailing (a motor mount is optional), the Canadian-built NorseBoat 17.5—one of which was spotted by a CW editor making its way through the Northwest Passage with a two-man crew—features an open cockpit, a carbon-fiber mast, and a curved-gaff rig, with an optional furling headsail set on a sprit. The lapstrake hull is fiberglass; the interior is ply and epoxy. The boat comes standard with two rowing stations and one set of 9-foot oars. The boat is designed with positive flotation and offers good load-carrying capacity, which you could put to use if you added the available canvas work and camping tent. NorseBoats offers a smaller sibling, the 12.5, as well; both are available in kit form.

$19,000, (902) 659-2790, norseboat.com

Montgomery 17

Billed as a trailerable pocket cruiser, the Montgomery 17 is a stout-looking sloop designed by Lyle Hess and built out of fiberglass in Ontario, California, by Montgomery Boats. With a keel and centerboard, the boat draws just under 2 feet with the board up and can be easily beached when you’re gunkholing. In the cuddy cabin you’ll find sitting headroom, a pair of bunks, a portable toilet, optional shore and DC power, and an impressive amount of storage space. The deck-stepped mast can be easily raised using a four-part tackle. The builder reports taking his own boat on trips across the Golfo de California and on visits to California’s coastal islands. Montgomery makes 15-foot and 23-foot models, as well. If you’re in search of a small sailboat with a cabin, the Montgomery 17 has to be on your wish list.

With long overhangs and shiny brightwork, the CW Hood 32 is on the larger end of the daysailer spectrum. Designers Chris Hood and Ben Stoddard made a conscious decision to forego a cabin and head in favor of an open cockpit big enough to bring 4 or 5 friends or family out for an afternoon on the water. The CW Hood 32 is sleek and graceful through the water and quick enough to do some racing, but keeps things simple with a self-tacking jib and controls that can be lead back to a single-handed skipper. A top-furling asymmetrical, electric sail drive and Torqeedo outboard are all optional. The CW Hood 32 makes for a great small family sailboat.  cwhoodyachts.com

Sun Cat from Com-Pac

Shallow U.S. East Coast bays and rock-strewn coasts have long been graced by cat boats, whose large, gaff-rigged mainsails proved simple and powerful both on the wind and, better yet, when reaching and running. The 17-foot-4-inch Sun Cat, built by Com-Pac Yachts, updates the classic wooden cat with its fiberglass hull and deck and the easy-to-step Mastender Rigging System, which incorporates a hinged tabernacle to make stepping the mast a one-person job. If you want a personal sailboat ideal for solo sailing, the Sun Can is a great choice. Belowdecks, the twin 6-foot-5-inch berths and many other features and amenities make this cat a willing weekender.

$19,800, (727) 443-4408, com-pacyachts.com

Catalina 16.5

The Catalina 16.5 sits right in the middle of Catalina Yachts’ line of small sailboats, which range from the 12.5 to the 22 Capri and Sport, and it comes in both an easy-to-trailer centerboard model and a shoal-draft fixed-keel configuration. With the fiberglass board up, the 17-foot-2-inch boat draws just 5 inches of water; with the board down, the 4-foot-5-inch draft suggests good windward performance. Hull and deck are hand-laminated fiberglass. The roomy cockpit is self-bailing, and the bow harbors a good-sized storage area with a waterproof hatch. catalinayachts.com

No roundup of best small sailboats (trailerable and fun too) would be complete without a mention of the venerable Hobie 16, which made its debut in Southern California way back in 1969. The company has introduced many other multihulls since, but more than 100,000 of the 16s have been launched, a remarkable figure. The Hobie’s asymmetric fiberglass-and-foam hulls eliminate the need for daggerboards, and with its kick-up rudders, the 16 can be sailed right up to the beach. Its large trampoline offers lots of space to move about or a good place to plant one’s feet when hanging off the double trapezes with a hull flying. The boat comes with a main and a jib; a spinnaker, douse kit, trailer, and beach dolly are optional features. hobiecat.com

Novice sailors or old salts looking for simplicity could both enjoy sailing the Hunter 15. With a fiberglass hull and deck and foam flotation, the boat is sturdily built. The ample freeboard and wide beam provide stability under way, and the heavy-duty rubrail and kick-up rudder mean that you won’t have to worry when the dock looms or the going grows shallow. Both the 15 and its slightly larger 18-foot sibling come standard with roller-furling jibs.

$6,900/$9,500 (boat-show prices for the 15 and 18 includes trailers), (386) 462-3077, marlow-hunter.com

– CHECK THE FIT – Follow these guidelines to make sure your life jacket looks good, stays comfortable and works when you need it. Safety Tip Provided by the U.S. Coast Guard

Super Snark

Under various owners, the Snark brand of sailboats, now built by Meyers Boat Co., has been around since the early 1970s. The Super Snark, at 11 feet, is a simple, easily car-topped daysailer that’s fit out with a lateen rig and sail. Billed as unsinkable, the five boats in the company’s line are built with E.P.S. foam, with the external hull and deck vacuum-formed to the core using an A.B.S. polymer. The Super Snark weighs in at 50 pounds, and with a payload capacity of 310 pounds, the boat can carry two.

$970, (800) 247-6275, meyersboat.com

Norseboat 21.5

Built in Canada, the NorseBoat 21.5 is a rugged looking craft that comes in a couple of configurations: one with an open cockpit and small doghouse, and another with a smaller cockpit and cabin that houses a double berth for two adults and optional quarter berths for the kids. Both carry NorseBoat’s distinctive looking carbon fiber gaff-rigged mast with main and jib (a sprit-set drifter is optional), and come with a ballasted stub keel and centerboard. Because of its lightweight design, the boat can be rowed and is easily trailered.

$36,000 (starting), 902-659-2790, norseboat.com

Flying Scot

Talk about time-tested, the 19-foot Flying Scot has been in production since 1957 and remains a popular design today. Sloop rigged, with a conventional spinnaker for downwind work, the boat is an easily sailed family boat as well as a competitive racer, with over 130 racing fleets across the U.S. Its roomy cockpit can seat six to eight, though the boat is often sailed by a pair or solo. Hull and deck are a fiberglass and balsa core sandwich. With the centerboard up, the boat draws only eight inches. Though intended to be a daysailer, owners have rigged boom tents and berths for overnight trips, and one adventurous Scot sailor cruised his along inland waterways from Philadelphia to New Orleans.

Known primarily for its line of racing dinghys, RS Sailing also builds the 16-foot, 4-inch Venture, which it describes as a cruising and training dinghy. The Venture features a large, self-draining cockpit that will accommodate a family or pack of kids. A furling jib and mainsail with slab reefing come standard with the boat; a gennaker and trapeze kit are options, as is an outboard motor mount and transom swim ladder. The deck and hull are laid up in a fiberglass and Coremat sandwich. The Venture’s designed to be both a good performer under sail, but also stable, making it a good boat for those learning the sport.

$14,900, 203-259-7808, rssailing.com

Topper makes a range of mono- and multihull rotomolded boats, but the model that caught one editor’s eye at Strictly Sail Chicago was the Topaz Taz. At 9 feet, 8 inches LOA and weighing in at 88 pounds, the Taz is not going to take the whole crowd out for the day. But, with the optional mainsail and jib package (main alone is for a single child), the Taz can carry two or three kids or an adult and one child, and would make a fun escape pod when tied behind the big boat and towed to some scenic harbor. The hull features Topper’s Trilam construction, a plastic and foam sandwich that creates a boat that’s stiff, light, and durable, and shouldn’t mind being dragged up on the beach when it’s time for a break.

$2,900 (includes main and jib), 410-286-1960, topazsailboats.com

WindRider WRTango

WRTango, a fast, sturdy, 10-foot trimaran that’s easy to sail, is the newest portable craft from WindRider International. It joins a line that includes the WR16 and WR17 trimarans. The Tango features forward-facing seating, foot-pedal steering, and a low center of gravity that mimics the sensation of sitting in a kayak. It weighs 125 pounds (including the outriggers and carbon-fiber mast), is extremely stable, and has single-sheet sail control. The six-inch draft and kick-up rudder make it great for beaching, while the hull and outriggers are made of rotomolded polyethylene, so it can withstand running into docks and being dragged over rocks.

$3,000, 612-338-2170, windrider.com

• More: 21 - 30 ft , Boat Gallery , day sailing , dinghy , Sailboat Reviews , Sailboats , under 20 ft
• More Sailboats

Sailboat Review: Italia Yachts 14.98

For Sale: 2000 Oyster 53

Lagoon 60 Prepares for World Premiere

Now For Sale: Leopard 45

Preparing to Head Out

Competitive Cruising: It’s a Rally, Not a Race

The Data Difference: Advances in Marine Weather Forecasting

• Digital Edition
• Customer Service
• Privacy Policy
• Email Newsletters
• Cruising World
• Sailing World
• Salt Water Sportsman
• Sport Fishing
• Wakeboarding

Yachting Monthly

• Digital edition

25 of the best small sailing boat designs

• Nic Compton
• August 10, 2022

Nic Compton looks at the 25 yachts under 40ft which have had the biggest impact on UK sailing

There’s nothing like a list of best small sailing boat designs to get the blood pumping.

Everyone has their favourites, and everyone has their pet hates.

This is my list of the 25 best small sailing boat designs, honed down from the list of 55 yachts I started with.

I’ve tried to be objective and have included several boats I don’t particularly like but which have undeniably had an impact on sailing in the UK – and yes, it would be quite a different list if I was writing about another country.

If your favourite isn’t on the best small sailing boat designs list, then send an email to [email protected] to argue the case for your best-loved boat.

Ready? Take a deep breath…

Credit: Bob Aylott

Laurent Giles is best known for designing wholesome wooden cruising boats such as the Vertue and Wanderer III , yet his most successful design was the 26ft Centaur he designed for Westerly, of which a remarkable 2,444 were built between 1969 and 1980.

It might not be the prettiest boat on the water, but it sure packs a lot of accommodation.

The Westerly Centaur was one of the first production boats to be tank tested, so it sails surprisingly well too. Jack L Giles knew what he was doing.

Colin Archer

Credit: Nic Compton

Only 32 Colin Archer lifeboats were built during their designer’s lifetime, starting with Colin Archer in 1893 and finishing with Johan Bruusgaard in 1924.

Yet their reputation for safety spawned hundreds of copycat designs, the most famous of which was Sir Robin Knox-Johnston ’s Suhaili , which he sailed around the world singlehanded in 1968-9.

The term Colin Archer has become so generic it is often used to describe any double-ender – so beware!

Contessa 32

Assent ‘s performance in the 1979 Fastnet Race makes the Contessa 32 a worth entry in the 25 best small sailing boat designs list. Credit: Nic Compton

Designed by David Sadler as a bigger alternative to the popular Contessa 26, the Contessa 32 was built by Jeremy Rogers in Lymington from 1970.

The yacht’s credentials were established when Assent , the Contessa 32 owned by Willy Kerr and skippered by his son Alan, became the only yacht in her class to complete the deadly 1979 Fastnet Race .

When UK production ceased in 1983, more than 700 had been built, and another 20 have been built since 1996.

Cornish Crabber 24

It seemed a daft idea to build a gaff-rigged boat in 1974, just when everyone else had embraced the ‘modern’ Bermudan rig.

Yet the first Cornish Crabber 24, designed by Roger Dongray, tapped into a feeling that would grow and grow and eventually become a movement.

The 24 was followed in 1979 by the even more successful Shrimper 19 – now ubiquitous in almost every harbour in England – and the rest is history.

Drascombe Lugger

Credit: David Harding

There are faster, lighter and more comfortable boats than a Drascombe Lugger.

And yet, 57 years after John Watkinson designed the first ‘lugger’ (soon changed to gunter rig), more than 2,000 have been built and the design is still going strong.

More than any other boat, the Drascombe Lugger opened up dinghy cruising, exemplified by Ken Duxbury’s Greek voyages in the 1970s and Webb Chiles’s near-circumnavigation on Chidiock Tichbourne I and II .

The 26ft Eventide. Credit: David Harding

It’s been described as the Morris Minor of the boating world – except that the majority of the 1,000 Eventides built were lovingly assembled by their owners, not on a production line.

After you’d tested your skills building the Mirror dinghy, you could progress to building a yacht.

And at 24ft long, the Eventide packed a surprising amount of living space.

It was Maurice Griffiths’ most successful design and helped bring yachting to a wider audience.

You either love ’em or you hate ’em – motorsailers, that is.

The Fisher 30 was brought into production in 1971 and was one of the first out-and-out motorsailers.

With its long keel , heavy displacement and high bulwarks, it was intended to evoke the spirit of North Sea fishing boats.

It might not sail brilliantly but it provided an exceptional level of comfort for its size and it would look after you when things turned nasty.

Significantly, it was also fitted with a large engine.

Credit: Rupert Holmes

It should have been a disaster.

In 1941, when the Scandinavian Sailing Federation couldn’t choose a winner for their competition to design an affordable sailing boat, they gave six designs to naval architect Tord Sundén and asked him to combine the best features from each.

The result was a sweet-lined 25ft sloop which was very seaworthy and fast.

The design has been built in GRP since the 1970s and now numbers more than 4,000, with fleets all over the world.

Credit: Kevin Barber

There’s something disconcerting about a boat with two unstayed masts and no foresails, and certainly the Freedom range has its detractors.

Yet as Garry Hoyt proved, first with the Freedom 40, designed in collaboration with Halsey Herreshoff, and then the Freedom 33 , designed with Jay Paris, the boats are simple to sail (none of those clattering jib sheets every time you tack) and surprisingly fast – at least off the wind .

Other ‘cat ketch’ designs followed but the Freedoms developed their own cult following.

Hillyard 12-tonner

The old joke about Hillyards is that you won’t drown on one but you might starve to death getting there.

And yet this religious boatbuilder from Littlehampton built up to 800 yachts which travelled around the world – you can find them cruising far-flung destinations.

Sizes ranged from 2.5 to 20 tons, though the 9- and 12-ton are best for long cruises.

The innovations on Jester means she is one of the best small sailing boat designs in the last 100 years. Credit: Ewen Southby-Tailyour

Blondie Hasler was one of the great sailing innovators and Jester was his testing ground.

She was enclosed, carvel planked and had an unstayed junk rig.

Steering was via a windvane system Hasler created.

Hasler came second in the first OSTAR , proving small boats can achieve great things.

Moody kicked off the era of comfort-oriented boats with its very first design.

The Moody 33, designed by Angus Primrose, had a wide beam and high topside to produce a voluminous hull .

The centre cockpit allowed for an aft cabin, resulting in a 33-footer with two sleeping cabins – an almost unheard of concept in 1973 –full-beam heads and spacious galley.

What’s more, her performance under sail was more than adequate for cruising.

Finally, here was a yacht that all the family could enjoy.

Continues below…

What makes a boat seaworthy?

What characteristics make a yacht fit for purpose? Duncan Kent explores the meaning of 'seaworthy' and how hull design and…

How boat design is evolving

Will Bruton looks at the latest trends and innovations shaping the boats we sail

How keel type affects performance

James Jermain looks at the main keel types, their typical performance and the pros and cons of each

Boat handling: How to use your yacht’s hull shape to your advantage

Whether you have a long keel or twin keel rudders, there will be pros and cons when it comes to…

Nicholson 32

Credit: Genevieve Leaper

Charles Nicholson was a giant of the wooden boat era but one of his last designs – created with his son Peter – was a pioneering fibreglass boat that would become an enduring classic.

With its long keel and heavy displacement, the Nicholson 32 is in many ways a wooden boat built in fibreglass – and indeed the design was based on Nicholson’s South Coast One Design.

From 1966 to 1977, the ‘Nic 32’ went through 11 variations.

Credit: Hallberg-Rassy

In the beginning there was… the Rasmus 35. This was the first yacht built by the company that would become Hallberg-Rassy and which would eventually build more than 9,000 boats.

The Rasmus 35, designed by Olle Enderlein, was a conservative design, featuring a centre cockpit, long keel and well-appointed accommodation.

Some 760 boats were built between 1967 and 1978.

Credit: Larry & Lin Pardey

Lyle Hess was ahead of his time when he designed Renegade in 1949.

Despite winning the Newport to Ensenada race, the 25ft wooden cutter went largely unnoticed.

Hess had to build bridges for 15 years before Larry Pardey asked him to design the 24ft Seraffyn , closely based on Renegade ’s lines but with a Bermudan rig.

Pardey’s subsequent voyages around the world cemented Hess’s reputation and success of the Renegade design.

Would the Rustler 36 make it on your best small sailing boat list? Credit: Rustler Yachts

Six out of 18 entries for the 2018 Golden Globe Race (GGR) were Rustler 36s, with the top three places all going to Rustler 36 skippers.

It was a fantastic endorsement for a long-keel yacht designed by Holman & Pye 40 years before.

Expect to see more Rustler 36s in the 2022 edition of the GGR!

It was Ted Heath who first brought the S&S 34 to prominence with his boat Morning Cloud .

In 1969 the yacht won the Sydney to Hobart Race, despite being one of the smallest boats in the race.

Other epic S&S 34 voyages include the first ever single-handed double circumnavigation by Jon Sanders in 1981

Credit: Colin Work

The Contessa 32 might seem an impossible boat to improve upon, but that’s what her designer David Sadler attempted to do in 1979 with the launch of the Sadler 32 .

That was followed two years later by the Sadler 29 , a tidy little boat that managed to pack in six berths in a comfortable open-plan interior.

The boat was billed as ‘unsinkable’, with a double-skinned hull separated by closed cell foam buoyancy.

What’s more, it was fast, notching up to 12 knots.

Credit: Dick Durham/Yachting Monthly

Another modern take on the Contessa theme was the Sigma 33, designed by David Thomas in 1979.

A modern underwater body combined with greater beam and higher freeboard produced a faster boat with greater accommodation.

And, like the Contessa, the Sigma 33 earned its stripes at the 1979 Fastnet, when two of the boats survived to tell the tale.

A lively one-design fleet soon developed on the Solent which is still active to this day.

A replica of Joshua Slocum’s Spray . Credit: Alamy Stock Photo

The boat Joshua Slocum used for his first singlehanded circumnavigation of the world wasn’t intended to sail much further than the Chesapeake Bay.

The 37ft Spray was a rotten old oyster sloop which a friend gave him and which he had to spend 13 months fixing up.

Yet this boxy little tub, with its over-optimistic clipper bow, not only took Slocum safely around the world but has spawned dozens of modern copies that have undertaken long ocean passages.

Credit: James Wharram Designs

What are boats for if not for dreaming? And James Wharram had big dreams.

First he sailed across the Atlantic on the 23ft 6in catamaran Tangaroa .

He then built the 40ft Rongo on the beach in Trinidad (with a little help from French legend Bernard Moitessier) and sailed back to the UK.

Then he drew the 34ft Tangaroa (based on Rongo ) for others to follow in his wake and sold 500 plans in 10 years.

Credit: Graham Snook/Yachting Monthly

The Twister was designed in a hurry.

Kim Holman wanted a boat at short notice for the 1963 season and, having had some success with his Stella design (based on the Folkboat), he rushed out a ‘knockabout cruising boat for the summer with some racing for fun’.

The result was a Bermudan sloop that proved nigh on unbeatable on the East Anglian circuit.

It proved to be Holman’s most popular design with more than 200 built.

Credit: Alamy Stock Photo

Laurent Giles’s design No15 was drawn in 1935 for a Guernsey solicitor who wanted ‘a boat that would spin on a sixpence and I could sail single-handed ’.

What the young Jack Giles gave him was a pretty transom-sterned cutter, with a nicely raked stem.

Despite being moderate in every way, the boat proved extremely able and was soon racking up long distances, including Humphrey Barton’s famous transatlantic crossing on Vertue XXXV in 1950.

Wanderer II and III

Credit: Thies Matzen

Eric and Susan Hiscock couldn’t afford a Vertue, so Laurent Giles designed a smaller, 21ft version for them which they named Wanderer II .

They were back a few years later, this time wanting a bigger version: the 30ft Wanderer III .

It was this boat they sailed around the world between 1952-55, writing articles and sailing books along the way.

In doing so, they introduced a whole generation of amateur sailors to the possibilities of long-distance cruising.

Westerly 22

The origins of Westerly Marine were incredibly modest.

Commander Denys Rayner started building plywood dinghies in the 1950s which morphed into a 22ft pocket cruiser called the Westcoaster.

Realising the potential of fibreglass, in 1963 he adapted the design to create the Westerly 22, an affordable cruising boat with bilge keels and a reverse sheer coachroof.

Some 332 boats were built to the design before it was relaunched as the Nomad (267 built).

Enjoyed reading 25 of the best small sailing boat designs?

A subscription to Yachting Monthly magazine costs around 40% less than the cover price .

Print and digital editions are available through Magazines Direct – where you can also find the latest deals .

YM is packed with information to help you get the most from your time on the water.

• Take your seamanship to the next level with tips, advice and skills from our experts
• Impartial in-depth reviews of the latest yachts and equipment
• Cruising guides to help you reach those dream destinations

Follow us on Facebook , Twitter and Instagram.

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

• Collections

Twenty Small Sailboats to Take You Anywhere

John Vigor turns the spotlight on twenty seaworthy sailboats that are at home on the ocean in all weather. These are old fiberglass boats, mostly of traditional design and strong construction. All are small, from 20 feet to 32 feet overall, but all have crossed oceans, and all are cheap.

Choosing the right boat to take you across an ocean or around the world can be confusing and exasperating, particularly with a tight budget. Vigor sets out to remedy that in this book. He compares the designs and handling characteristics of 20 different boats whose secondhand market prices start at about $3,000. Interviews with experienced owners (featuring valuable tips about handling each boat in heavy weather) are interspersed with line drawings of hulls, sail plans, and accommodations. Vigor has unearthed the known weaknesses of each boat and explains how to deal with them. He rates their comparative seaworthiness, their speed, and the number of people they can carry in comfort. If you have ever dreamed the dream this book can help you turn it into reality.

International Folkboat

Pacific Seacraft 25

Albin Vega 27

Cape Dory 25D

Contessa 26

Morris 26 Frances

Catalina 27

Falmouth Cutter 22

Pacific Seacraft Dana 24

Pearson Triton

Contessa 32

Southern Cross 31

Bristol Channel Cutter

Nicholson 31

Allied Seawind

Westsail 32

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

• Articles and Guides

11 Best Small Sailboat Brands: How to Choose Your Next Daysailer or Pocket Cruiser

12th oct 2023 by samantha wilson.

Sailing is a relaxing, invigorating pastime that allows you to harness wind and waves in a unique and historic way without requiring a 50-foot yacht to enjoy what’s special about the experience. In fact, small sailboats allow a delightful back-to-basics experience that often gets lost on larger, systems-heavy sailboats.

On a small sailboat you can connect with the sea, feeling the boat move beneath you. The boat is typically easy to rig, simple to sail, and can even be sailed solo. Small sailboats give you the freedom to trailer your or car-top your boat and go anywhere, and they’re perfect for learning the nuances of sailing. There are many excellent brands and models of small sailboat, each with their own appeal, and here we narrow down some of our favorite in the daysailer and pocket cruiser categories under 30 feet. 

Difference Between a Daysailer and a Pocket Cruiser

While there are many different types of sailboat on the market and there is no single definition of either a daysailer or a pocket cruiser, they are used in a particular way, as the names imply. The term daysailer covers a huge array of sailboats, smaller and sometimes larger, and is generally defined as any day boat used for local sailing, with a simple rig, and easy to get underway. A pocket cruiser typically offers a cabin and head, and adequate accommodations for an overnight stay and sometimes longer cruises. Having said that, there is a large overlap between the two in many instances, so the lines may become blurred. 

What Size is a Small Sailboat?

Small is a relative term of course, but in general—and for the purposes of this article—a small sailboat is one that could be sailed by a small crew, often with one or two people aboard. It will have a simple rig and be trailerable, and it might be either a daysailer or pocket-cruiser style vessel as above. Within those categories, there are many models and styles, but when it comes to length we consider a sailboat as small when it’s under 30 feet in overall length. 

The Best Sailboats Under 30 Feet

Pocket cruiser: Beneteau First 27.  The Beneteau First 27 is a modern example of a pocket cruiser, earning Cruising World ’s Boat of the Year award in the Pocket Cruiser category in 2022. With space for up to six people accommodated in a separated bow-cabin and open saloon, it offers families the chance to go farther, explore more, and cruise in comfort. There is a galley with freshwater and a head, adding to the interior home comforts. The sailboat itself is modern, fast, and stable, designed by Sam Manuard, and has been designed to be incredibly safe and almost unsinkable thanks to its three watertight chambers. The handling is also refreshingly intuitive, with a well-designed cockpit, simple deck controls, and double winches allowing it to be sailed solo, by two people, or a small crew. 

Photo credit: Beneteau

Daysailer: Alerion 28.  You’ll certainly turn heads cruising along in an Alerion 28, a daysailer whose forerunner by the same name was designed by Nathanael Herreshoff in 1912 and then updated with a modern underbody for fiberglass production by Carl Schumacher in the late 1980s. This pretty daysailer manages to combine a traditional silhouette and classic feel, with very modern engineering creating an excellent package. Over 470 of these sailboats were built and sold in the past 30 years, making it one of the most popular modern daysailers on the water. With a small cabin and saloon, complete with miniature galley area, it offers respite from the sun or wind and the option for a night aboard. The cockpit offers a beautiful sailing experience, with plenty of space for the whole family. 

Photo credit: Alerion Yachts

The Best Sailboats Under 25 Feet

Pocket cruiser: Cornish Crabber 24.  British manufacturer Cornish Crabber has been producing beautiful, traditional style small sailboats for decades, ensuring they honor their heritage both in the construction style and appearance of their boats. The Cornish Crabber 24 is the most iconic of their range and dates back to the 1980s. It offers a simple yet surprisingly spacious interior layout with cabin, galley, and head, and a good sized cockpit, as well as seating for up to six people. It’s the perfect family sailboat, with clever use of storage as well as just under 5000 pounds of displacement providing stability and easy tacking. Aesthetically the 24 is simply beautiful, with a traditional silhouette (combined with modern engineering), finished in hardwood trims. 

Photo credit: Cornish Crabber

Daysailer: Catalina 22 Capri.  Catalina sailboats need little introduction, and are one of the world’s best-known, most-respected brands building small sailboats. The Catalina 22 Capri (also available in a sport model) is a great example of what Catalina does so well. While we’ve classified it as a daysailer, it could easily cross into the pocket cruiser category, as it offers excellent sailing performance in almost all conditions as well as having a small cabin, galley, and head. Loved for its safety, stability, ease of handling and simple maintenance, it makes for a good first family boat for getting out onto the bay or lake. 

Photo credit: Catalina

The Best Sailboats Under 20 Feet

Pocket cruiser: CapeCutter 19.  This is another model that combines the beauty of the traditional silhouettes with modern-day advancements. The design originates from the classic gaff cutter work boats, but today offers excellent performance—in fact it’s one of the fastest small gaffers in the world. The interior is cleverly spacious, with four berths, two of which convert into a saloon, as well as a simple galley area. With quick rigging, it can be sailed solo, but is also able to accommodate small groups, making it a capable and hugely versatile pocket cruiser. 

Photo credit: Cape Cutter 19

Daysailer: Swallow Yachts’ BayRaider 20.  Classic looks with modern performance are combined in Swallow Yachts’ beautiful BayRaider 20. This is one of the most capable and safest daysailers we’ve seen, but also incredibly versatile thanks to the choices of ballast. Keep the ballast tank empty and it’s light and fast. Fill the tank up and you’ve got a stable and safe boat perfect for beginners and families. While it’s got an eye-catching traditional style, the engineering is modern, with a strong carbon mast and construction. While this is a true daysailer, you can use the optional spray hood and camping accessories to create an overnight adventure. 

Photo credit: Swallow Yachts

The Best Sailboats Under 15 Feet

Pocket Cruiser: NorseBoat 12.5.  Can we truly call the NorseBoat 12.5 a pocket cruiser? Yes we can! The sheer versatility of this excellent little sailboat has convinced us. These beautiful hand-crafted sailboats offer exceptional performance and are described by the manufacturer as ‘the Swiss Army Knives of sailboats’. The traditionally styled 12.5 can be sailed, rowed, and motored. It can be trailered, easily beached, and even used as a camp cruiser, allowing for overnight adventures. There is no end to the fun that can be had with this easy-to-sail and easy-to-handle boat, which makes it a dream to learn in. With positive flotation, lots of clever storage, and a full-size double berth for camp cruising, it really is the perfect mini pocket cruiser. 

Photo credit: NorseBoats

Daysailer: Original Beetle Cat Boat 12: All across the bays of the US east coast cat boats have long been part of the ocean landscape. Able to access shallow rocky coves yet also withstand the strong coastal winds, these traditional New England fishing boats have an iconic shape and gaff-rigged mainsails. Beetle Cat have been producing elegant wooden cat boats for over 100 years – in fact they’ve made and sold over 4,000 boats to date. Their 12 foot Cat Boat 12 is one of their finest models, offering lovely daysailing opportunities. It has a wide beam and centerboard that lifts up, allowing it to access shallow waters, as well as a forward mast and single sail gaff rig in keeping with the traditional cat boats. To sail one of these is to be part of the heritage of New England and Cape Cod, and to honor the ancient art of hand-made boat building. 

Beetle Cat official website

Photo credit: Beetle Cat

The Best Small Sailboats for Beginners

When it comes to learning to sail, it’s important to have a boat that is easy to handle. There’s no quicker way to put yourself or your family off sailing than to start off with a boat that is either too big or too complicated. When choosing your first boat we recommend the following characteristics:

• Small: The benefits of starting off with a small boat are many, as we’ve seen above. They’re easier to control as well as to moor, and they react more quickly to steering and sails. They can be trailered and launched easily, and the loads generated are much lower than on bigger, heavier boats.
• Easy to sail: You want a boat that is stable and forgiving of mistakes, doesn’t capsize easily, and isn’t too overpowered in a stronger breeze. Keep things simple and learn as you go.
• Simple sail configuration: Choosing a boat that can be rigged by one person in a few minutes, and easily sailed solo, makes it easier to take along inexperienced crews. With regards to the rig, all you need are a halyard to hoist the mainsail and a sheet to control the mainsail.
• Tiller steering: We recommend boats with tiller steering over wheel steering when starting out. The tiller allows you to get a real feel for the boat and how the rudder works as it moves through the water. 

For more information on choosing the best beginner sailboat check out our full guide. There are many popular brands of beginner boats including Sunfish, Laser, and Hunter Marlow. Some of our favorites include;

Hobie 16: The classic Hobie catamaran has been a well-loved beginner sailboat for years, and the Hobie 16 started life back in 1969. Since then they’ve made and sold over a staggering 100,000 of the 16s. It has twin fiberglass and foam hulls, a large trampoline, and a pull-up rudder so it can be sailed straight onto the beach. The basic package comes with an easy to handle main and jib with plenty of extras available too such as a spinnaker and trailer. The Hobie 16 promises a great learning experience and lots of fun in a very nifty and inexpensive package. 

Photo credit: Hobie

Paine 14: You’ll immediately fall in love with sailing when you step into a beautiful Paine 14. Made from seamless epoxy cold-molded wood, the P-14 is simply beautiful and offers the classic sailing experience with the design and innovation of a more modern hull and rig. Two people will be able to enjoy getting out on the water together and learning the ropes. The Paine 14 has a lead ballast keel that accounts for nearly half her weight, giving her the feel of a much larger boat, but is still trailerable and easy to manage offering the best of both worlds. 

Photo credit: Chuck Paine

High-Performance Small Sailboats

Small sailboats generally become high performers if they are light, have a lot of sail area, or they have more than one hull. More recently, some of have been designed with foiling surfaces, as well. For the purposes of this article, we’d like to close by pointing out one model that is super fast and has versatile pocket-cruising capabilities.

Corsair 880 trimaran : The Corsair 880 trimaran is the grandchild of the company’s F27, a model that launched the popularity of trailerable leisure trimarans about 40 years ago. The 880 has taken the model to new heights and exemplifies the incredible space benefits you can achieve in a 29-foot sailboat. We’re talking an aft cabin, room to sleep 5 people, an enclosed head, and standing headroom in the galley and main saloon. It brings many of the opportunities that a much larger yacht plus the ability to cruise in extremely shallow water. Whether you want to cruise to the Bahamas or enjoy a high-adrenaline race, the Corsair 880 offers incredible performance and unlimited adventures in a truly pocket size. 

Photo credit: Corsair

Written By: Samantha Wilson

Samantha Wilson has spent her entire life on and around boats, from tiny sailing dinghies all the way up to superyachts. She writes for many boating and yachting publications, top charter agencies, and some of the largest travel businesses in the industry, combining her knowledge and passion of boating, travel and writing to create topical, useful and engaging content.

More from: Samantha Wilson

Related Articles and Guides

17th May 2024

Best Bass Boat Brands By Hull Construction, Affordability, and Size

26th Apr 2024

The Best Real-Time Imaging Sonar for Fishing-Finding

14th Apr 2024

Best Small Center Console Boats Under 25 Feet

7th Apr 2024

Best Cheap Fishing Boat Brands, Affordable to Cheapest of All

• Explore Rightboat
• Boats for Sale
• Boating Articles
• Buyers Guide
• About RightBoat
• Sell Your Boat
• Boat Selling Advice
• All manufacturers
• All categories

Enter your email to keep up to date with the latest news

Join for free

Sign up now for free and discover how easy it is to keep up to date with THE latest boats for sale. Find your right boat, and tailor your voyage to finding your next boat.

Benefits of becoming a member:

• Set up tailored alerts
• Personalise your experience
• Download full specifications and broker details
• Keep tabs on your favourite boats

Are you a broker? Join as a Broker

Rightboat - join for free.

Do you have an account already? Login

Save this search

Save your search and receive new boats in your email..

You can unsubscribe from your alerts whenever you like. By pressing the button you accept the Legal Terms and conditions

• Skip to main content
• Skip to secondary menu
• Skip to primary sidebar
• Skip to footer

Crowsurvival

Experience the Best that RVs, RV Accessories, Campers, Boats, Camping, Hiking & Fishing has to offer.

12 Perfect Small Sailboats

Jonathan Holmes 5.0 5.0 out of 5 stars (based on 40 reviews)

Thank you for reading our post, please rate this article at the end.

Last Updated on December 31, 2023 by Jonathan Holmes

Easy to rig, simple to toe, compact, manageable, maintainable, and affordable, all the perfect small sailboats have one thing in common: they always provide an adventurous tour in the sea.

So, either you are looking for something light on the pocket or just an adventure enthusiast wanting some safe daytime ride, the perfect small sailboats are the sole good means to fulfill your call.

After all, honestly, everybody does not need large 30 ft sailboats for cruising. However, large boats offer a lot of features like bunks, refrigeration , entertainment, and electronics. But are these features necessary for just boating? Well, I guess not.

When cruising, you only require a boat, a sail, a rudder, and a mast. Thus, nothing can offer you the ultimate adventures of coastal cruising better than small sailboats. Small sailboats not only provide you a breezy feel in the water but also offer you the opportunity to sense every change in trim instantaneously.

Table of Contents

12Best Small Sailboats

The market has a wide variety of small sailboats that measure less than 20 ft in size. Moreover, they are quite hit products as they offer great fun in the water.

With this guide, you may equip yourself with all the necessary information about the top 12 small sailboats. My top picks are just perfect as they’re simple to sail, easy to rig, and time-tested. Thus, if you were looking for a listing of the perfect small sailboats, you’re certainly on the right post.

Keep scrolling to read on for the best small sailboat picks.

Hunter 22 is a clever boat for a very fair price. It retains the hull of its predecessor- Hunter 216, featuring an open transom and a large cockpit. However, it is made of fiberglass with balsa-cored topsides and a solid bottom section.

Furthermore, the deck is a bit changed, having a 40 sq. ft. larger rig. Similar to Hunter 216, it, too, features a hydraulic ballast keel. The Hunter 22 is primarily designed to offer a thin line between “go-fast mini-sport boat” and “fun family daysailer and weekender”.

You can select between either half of them according to your requirements.

The cruising package features a simple electrical system, a portable toilet, and a V-berth in the small cuddy cabin. Whereas, the performance package offers an asymmetric spinnaker, a retractable bowsprit, mid-cockpit traveler, hiking grips, and straps in the cockpit.

• Hunter 22 is a daysailer.
• It offers a portable toilet.
• The manufacturers offer an optional electrical system with Hunter 22.
• The boat features a large cockpit and open transom.
• It offers a cuddy cabin and twin bunks.
• It features a hydraulic lifting centerboard and laminated fiberglass deck and hull.
• Comfortable
• Fair priced
• Easy for trailing
• Faster than most of the other boats available in the market
• Versatile and family-friendly
• Might need some replacement parts

Catalina 22 Sport

The retractable keel and basic amenities allow the Catalina 22 Sport to be trailered easily. Basically, the Catalina 22 Sport is an updated design of its predecessor Catalina 22.

The large cockpit is enough to seat a crowd. It offers a fractional rig with a mainsail and a roller-furling jib, a cabin that provides bedding for four with a forward hatch for ventilation, and a retractable lead keel.

In essence, the Catalina 22 Sport is more of a family-friendly racer. Also, it offers an alternative to choosing an older boat.

Besides, the Catalina 22 Sport offers the value and quality Catalina has come to expect since 1970. It is simple to rig and an excellent sail to step up from dinghy sailing to budget cruising.

• Catalina 22 Sport is a daysailer.
• It offers an adjustable outboard motor bracket.
• The boat features a comfortable cockpit with contoured coamings.
• It has an anodized aluminum mast and boom.
• It offers low stretch halyards and internal halyards.
• Catalina 22 offers a complete standing and running rigging.
• Many interior features, including Fiberglass Hull Liner, molded Headliner, and Low Glare Texture.
• Easy for trailing with its swing keel
• Family-friendly
• Simple to rig without a complicated setup
• Fast in speed
• Stability and reliability
• Features spacious cabin
• If you choose some old models, you will need some replacement parts.
• Not much trendy considering the interior and upholstery

Hobie Cat 16

The legendary Hobie Cat 16 has revolutionized boating . Firstly, it belongs to a proud watersports lineage, which within a few years of the foundation was loved by thousands.

Secondly, The Hobie Cat 16 is either used as a daysailer or a racer. The double banana-shaped hulls easily cut through the water, and the boat gets going fast even in light winds, as the aluminum alloy frame and two sails catch wind considerably.

Thirdly, there would certainly be no complete roundup of fun, trailerable, and small sailboats without any mention of the venerable Hobie Cat 16. The large trampoline provides a spacious platform to move about. Moreover, it offers many optional features, including a beach dolly, trailer, douse kit, a spinnaker, and a main and a jib.

In essence, it is a classic boat; enthusiasts and collectors covet it alike. Undoubtedly, it has the pedigree to prove that it is the red Ferrari in the world of cruising.

• The mast is 26 ft 6 inches tall and weighs about 320 pounds.
• The boat is 16 ft 7 inches in length and 7 ft 11 inches in width.
• Two color options are available.
• The dual-trapeze rig offers you harness its sheer power.
• The asymmetrical fiberglass hulls offer lift
• Low maintenance sailboat
• Reasonably priced
• Perfect for a Small Crew
• Easy to trailer
• Simple to rig
• Sailing may be hard when you’re alone.

Norseboat 21.5

In essence, the Norseboat 21.5 offers everything an expensive trailer-sailer does. It features a sensible centerboard arrangement, contemporary, good fit and finish, high-quality construction, and sea-kindly underbody.

The value of Norseboat 21.5 lies in its charm. You will easily fall under its spell if you are into the idea of a solid and easy-to-sail boat. The price tag looks much higher for a small 21 ft boat. However, the hype of Norseboat 21.5 tells you that it’s worth it.

Moreover, the NorseBoat 21.5 offers several configurations: one with a small cockpit and cabin that has a double berth for two adults and an optional berth for children, and another with an open cockpit and smaller doghouse.

Each of them comes with a ballasted stub keel and centerboard and carries the brand’s exclusive carbon fiber gaff-rigged mast. Also, the lightweight design of the Norseboat 21.5 offers easy rowing and a simple trailer.

• Norseboat 21.5 offers a lightweight design.
• It offers two different configuration options.
• Norseboat 21.5 has rowing stations.
• It features an electric outboard.
• The hull and deck are of fiberglass with a wood core.
• Comfortable and versatile
• Expensive compared to the other sailboats on the list

Barney Lehman and W.D. Schock designed the Lido 14. It is an American sailing dinghy that was built in 1958 for the very first time.

In essence, the Lido 14 is a classic sailboat that proves to be a perfect pick to suit small boats, especially for the owners who are still learning the ropes of boating.

The Lido 14 is just perfect for shorthanded racing, single-handed sailing, and solo sailing. It offers seating arrangements for about six people at most.

In the first year of its launch, two hundred Lido 14 boats were ordered. And, around 6300 Lido 14s had been built for 40 years. Today, a new Lido 14 boat is not available in the market; however, you will not regret ever getting a functional used boat.

Thus, the Lido 14 makes your investment worth it and serves you well throughout the journey.

• It offers a retractable centerboard raised with stainless steel straps.
• The hull features a near-vertical transom, a spooned plumb stem, and a transom-hung rudder controlled by a tiller.
• It has a fractional sloop rig with a loose-footed mainsail and anodized aluminum spars.
• Non-intimidating
• Has the car top capability
• Easy in handling
• New models not available

RS Sailing is primarily known for its line of racing dinghies. It built the 16-ft, 4-in sized Venture, which is such a perfect training and cruising dinghy.

The Venture offers a large, self-draining cockpit that can accommodate a group of friends or a family. Whether you are just messing about with your family or friends, club sailing, or just up for casual racing, RS Venture delivers the best with all its features. It is among the most versatile and nimble dinghies for sailing the masses.

In addition, the RS Venture can carry up to eight people in its self-draining cockpit. The excellent performance makes it adventurous; the multiple equipment options allow several boat configurations.

Moreover, the RS Venture is the winner of multiple awards. The excellent stability makes the boat ideal on coastal water, offering an advantage to those learning the sport.

More importantly, The RS Venture has the potential to carry more people in it than its dinghy rivals.

• The RS Venture offers a spacious platform.
• It features a rear back storage.
• The boat also offers reverse transmission.
• It has an open cockpit with high buoyancy.
• The exterior is composed of plastic and dual carbide.
• Can be car toped
• Versatile and stable
• Simple to handle
• Good looking
• A bit expensive

Super Snark

The Super Snark is a simple, lightweight, lateen-rigged daysailer, marketed as the “Super Sea Snark.” It is fun sailing, easy to learn, unsinkable, and simple to set up, and transport. Most of the people who get it find it satisfying to their sailing requirements.

Moreover, Super Snark is highly portable and storable. It can easily load onto your vehicle due to its construction and light-weight. In addition, the roof racks with slide-out loading bars make moving much easier.

Termed as unsinkable, the Super Snark is built with EPS foam, with the external hull and deck, which is vacuum-formed to the deep with ABS. polymers. The Super Snark weighs approximately 50 lbs having a capacity load of 310 lbs. It can carry two people at once.

• It has the capacity for two people.
• The internal hull leaves no void as it is filled with EPS foam, making the boat unsinkable.
• Mast, spar, and boom are of aluminum.
• It is made of recycled plastic.
• It weighs approximately 50 lbs
• Lightweight
• Car top-able
• Recyclable construction material
• Easy to learn
• Simple to setup
• Not family-friendly

The Laser is one of the most popular single-handed racing sailboats available in the market. With its simple rigging and simple design, Laser started single-handed racing 50 years ago when it came out. Interestingly, with over two lacs made, it is the most popular race boat in the world.

Everyone enjoys the Laser, from club racers to Olympians. It is a simple vessel to own and rig, which rewards practice and good sailing techniques. The Laser is built with updated foils and sail controls.

Moreover, a three rigs system allows the sailors to enjoy boating. It offers a seating capacity for two people. This boat is a fiberglass lightweight model easy for capsize and recovery.

• It has the capacity for two people seating.
• Includes the upgraded Vang, Cunningham, and Outhaul controls
• The boat features heavy fiberglass hull construction with aluminum spars.
• It has a small rudder with a lower boom.
• Worldwide popular and recognized racer
• Car top capability
• Stable and easy to handle
• A bit hard to sail

If you are looking for a good looking sailboat with excellent performance, the Paine 14 is here for you. It features a contemporary fin keel and spade rudder, which makes it more agile and faster.

In essence, Paine 14 is an old-time appeal with its varnished gunnels and transoms. However, it offers all the modern features every updated boat has. You can rig this boat with a gaff or a Marconi rig and can trailer it behind a vehicle.

In fact, Paine 14 can sail under mainsail alone due to the large flotation compartments fore and aft. The rig is simple, with an unstayed carbon-fiber mast and a mainsail bent onto its spars.

Overall, the Paine 14 feels like a favorite classic daysailer when you sit in it. The bronze hardware, the slatted-wood cockpit sole, and the varnished trim; all of these are elegantly designed. The cockpit ergonomics are seamless, and the sail controls fall perfectly to hand.

• It features a modern fin keel and spade rudder.
• The boat is built in seamless epoxy cold-molded wood construction.
• It has parallelly fitted fiberglass battens to the luff, which extend from the leech to the foot of the sail.
• Easy for trailing with its fin keel
• Good prevention of slippage
• Features spacious platform
• Not much trendy in looks

FAR EAST 18

The FarEast 18 is a low maintenance 19-ft vessel that offers high speed cruising in the sea.

Equipped with an open deck, the Far East 18 offers excellent performance. It offers great safety and stability due to its design. The hull has a beautiful shape that can be easily handled.

The lifting keel and the removable rig makes it easy to transport by a trailer. It takes a square-top fixed mainsail and an asymmetrical spinnaker, which is a driving force for buoy racing. The Far East 18 can compete with six crew but also offers bedding for three people when you are staying out overnight.

Moreover, this vessel features an updated bulb keel with carbon structure, vacuum-infused foils, and fiberglass hull. Best of all, a single person can easily rig and launch FarEast 18. Moreover, you can trailer this boat easily with a displacement below 1500 pounds.

All in all, Far East 18 is an excellent little sailboat available in the market.

• Small cabin instead of a reduced deck
• It features an updated bulb keel.
• The boat features a spacious cockpit.
• It has a lightweight structure.
• It is constructed with a vacuum infused polyester sandwich.
• Not too brutal on the pocket
• Comfortable and low maintenance
• Modest Price
• Does not perform well in strong wind

The Sage 17 was designed in 2009 by Jerry Montgomery. It is a small, stable, go-anywhere vessel, featuring a transom with a balsa core, a carbon fiber deck, and a cabin roof.

The Sage 17 is a 1300 pound vessel. It comes with a loose-footed main and a working jib that sheets inside the lifelines. There is a kick-up rudder, a 120-lb centerboard, and a 400-pound lead keel that will not strand while cruising through shallow water.

In addition, this boat is simple enough for beginners and sophisticated enough for experienced sailors. It is manufactured to handle your adventures with safety. It comes with a non-skid covering on the horizontal surfaces, a bow pulpit, transom-mounted boarding ladder, and a self-draining cockpit.

Moreover, this model is hand-built with vinyl ester resin, fiberglass, and carbon fiber in a lapstrake style to offer you enhanced strength. The cabin and deck are made of a balsa core and carbon fiber.

The Sage 17 sails fast in light air and provides unruffled travel as the wind blows more strongly. You will definitely enjoy hindrance free comfort in the airy open cabin. And, you can get customized cabin cushions that are available in different colors.

• Jib downhaul lead for the cockpit
• Cabin-top mounted winches and jib tracks
• Internal halyards
• Single reef main and working jib, with running rigging
• Complete mast and stainless-steel standing rigging
• Fiberglass and vinyl ester lapstrake hull with a carbon fiber
• Carbon fiber and vinyl ester deck with a balsa core
• A variety of options available to choose from
• Simple enough for beginners
• Safe and durable
• Quite reasonably priced, considering all the features
• Might require some replacement gears

Montgomery 17

The Montgomery 17 was designed for Montgomery Boats by Jerry Montgomery in conjunction with Lyle C. Hess. It was manufactured with centerboard and keel models.

The Montgomery 17 offers more stability than most of its rivals. And, when it comes to comfortability, the Montgomery 17 again stands above the rest.

This boat has the capability of going about moderate offshore passages. You can easily trailer it as it is small enough in size.

Moreover, it is designed with a masthead and toe rail that fits most of the foresails. It has a proper amount of storage area, a DC power, an optional shore, and seating arrangements for two people offering a headroom, a pair of bunks, and a portable toilet.

Overall, the Montgomery 17 is among the giant-killers of the market when it comes to performance. Though small in size, it makes its way past its larger rivals and excels in the extremes.

That is not just it; using a four-part gear, you can easily uplift the deck-stepped mast.

• The hull type is swing keel.
• A flush deck version is also available.
• Some versions feature a fixed keel.
• There are three types of keel configurations available; retractable keel, shallow draft fixed keel, and a shallow draft fixed keel in conjunction with a centerboard.
• Comfortability
• Quite faster than its rivals
• Outstanding racing record
• Favorable handicap
• Not suitable for deep sea

The Wrap Up

Hitting the water with the right sailboat can be an overwhelming task for many. To ease this process, the list above has narrowed down the 12 perfect small sailboats.

While there are infinite sailboats available in the market, the sailboats, as mentioned above, will serve you right and make you enjoy the ride.

However, in my opinion, the best of all is none other than the Catalina 22 Sport as it is the most moderate pick of all. You don’t have to compromise on either the quality or affordability.

In my opinion, you must not spend too little or much for too low or too high quality. A moderate model will serve as the perfect pick for you. Thus, Catalina 22 Sport being moderately robust and not-so-expensive wins my heart.

Related posts:

• Affiliate Disclosure

Our Love for this stuff, unfortunately, does not pay the bills. Our audience supports us. We may earn an affiliate commission when you purchase through links on our site. This does not mean your purchase price will be higher. Sometimes, it could be lower due to our relationship and volume with the merchant. So shop with confidence. You are getting a good deal!

Terms and Conditions - Privacy Policy

Your sailing multihull DESIGN-INFO site for…

Small trimaran information, small multihull design, design issues, construction methods, comparisons of designs, speed, stability, and much more….

W17 Main Page

—Chris, Queensland

—Andrew, Philippines

—Jonathan, Michigan

—JR, first W17 kit owner

—Alan, St-Jean-de-Luz, France

—Louis & Luigi, Philippines

—David, Philippines

…I'm very impressed with the seaworthiness of this little boat. I have been in places I clearly should not have been, and in some very bad weather too…

                   —Andrew, Philippines

Read more sailors' comments…  

…was immediately struck that Mike's design goals closely matched my own. Really liked the look of the curved akas and plans for a wing mast are a big plus.

                   —Gary, Virginia

Read more builders' comments…

This boat…has such style and lines that she'd look totally in place as a sporty tender or toy on the deck of a fine Italian mega yacht.  Very nice indeed!

—Marshall, Florida

—Don, Alberta

" ... the W17 feels like it's flying through the water and air, unlike any other sailboat I've ever been on .... as it slips over the water with such agility and efficiency

                   —Bill, W.Virginia

‘The Waters Edge’

W22 main page.

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Customer Service

• Free Newsletter

Hunter 35.5 Legend Used Boat Review

Pearson Rhodes 41/Rhodes Bounty II Used Sailboat Review

Hallberg-Rassy 42 Used Sailboat Review

How to Perform Your Own Pre-Buy Inspection

Thinking Through a Solar Power Installation

How Does the Gulf Stream Influence our Weather?

Can You Run a Marine Air-Conditioner on Battery Power?

Preparing Yourself for Solo Sailing

Practical Sailor Classic: The Load on Your Rode

Anchor Rodes for Smaller Sailboats

Ground Tackle Inspection Tips

Shoe Goo II Excels for Quick Sail Repairs

Diesel Performance Additives

What Oil Analysis Reveals About Your Engine

Painting a New Bootstripe Like a Pro

Penetrating Epoxy—Another Marketing Gimmick?

The Best Tools for Bottom Painting

The Hidden Maintenance Problems That Can Ruin Your Day: Part 1

Alcohol Stoves— Swan Song or Rebirth?

Living Aboard with an Alcohol Stove

Choosing the Right Fuel for Your Alcohol Stove

How to Select Crew for a Passage or Delivery

Preparing A Boat to Sail Solo

Re-sealing the Seams on Waterproof Fabrics

Waxing and Polishing Your Boat

Reducing Engine Room Noise

Tricks and Tips to Forming Do-it-yourself Rigging Terminals

Marine Toilet Maintenance Tips

Learning to Live with Plastic Boat Bits

• Sailboat Reviews
• Sails, Rigging & Deck Gear

A Practical Look at Sailboat Cockpit Design

Ps outlines what to look for when searching for a comfortable, functional cockpit..

Cockpit ergonomics involve more than a concern about coaming angles and comfortable seating. These are just two items on a long list of attributes that define the space where sailors spend most of their waking time.

At boat shows, the crowd can be divided into those that poke around on deck and those who head directly below. Brokers know the difference between racing sailors and cruisers and which end of the companionway ladder will seal the deal. Racers want performance and scrutinize the on-deck design features that make it all happen, while cruisers look below for the amenities of a house afloat. This stereotype may be too rigid, but from what we’ve seen at recent boat shows, cruisers need to take a closer look at the cockpit and get a feel for how a sailboat will handle underway, as well as serve as a home away from home.

There’s much more at stake than comfort for the crew. Cockpit design and layout drives many boat-handling tasks, ranging from steering and sail trimming to what goes on when its time to reef. Angles of view can even affect watchkeeping.

For example, a high center cockpit and a large overlapping genoa create a 90-degree-plus no see zone, and thats a big deal when it comes to collision avoidance. A large catamaran with a tall bridge-deck cabin can add an even larger no see zone, especially when running on autopilot with no one perched on the elevated helm seat.

In short, many cockpits are optimized for at-anchor enjoyment instead of underway usability. So part of the boat-shopping process should include careful scrutiny of how essential sailing and boat-handling tasks will be accomplished. For starters, note how much contortion it takes to really crank each winch, determine whether or not the line leads favor easy reefing, and check to see how well the cockpit shape contributes to keeping the crew from being washed overboard. These are essential attributes, and for some, they are more vital than galley counter material and the fabric that covers the cushions below.

Grand Prix racers have long favored wide open, low sided, no-transom cockpits that are more of an open deck than a protective trench. In heavy weather, these nothing-to-cling-to cockpits can become perilous. In 1997, during the Hong Kong to Osaka, Japan Race, Americas Cup trials veteran Makoto Namba was at the helm of Escape One when a 20-foot breaking sea washed him out the open transom of the 45-foot racer. In 2006, Dutch Volvo Ocean racer Hans Horrevoets was swept from the deck of ABN AMRO TWO and lost at sea. Closer to home, pro sailor Dan Cianci was tossed over the lifelines of the 50-foot ocean racer Snow Lion. The accident occurred at night, in heavy weather just off the Delaware River mouth. In each case, the cockpit design favored sail trim and line handling over heavy-weather safety considerations. Many ocean racers mitigate such design tradeoffs with careful use of harnesses, tethers, jack lines, and hard points for tether attachment.

Just the opposite design trend can be found in the deep cockpit and conventional closed transom of sailboats such as Ted Hoods 25-year-old design, American Promise. Dodge Morgan sailed the heavy-displacement 60-footer solo around the world. The big, double-head rigged sloop provided a great deal of crew protection and seakeeping ability during Morgans voyage. And for years after he donated the boat to the U.S. Naval Academy, midshipmen also learned to appreciate the cockpit layout-particularly during bad weather offshore.

PS Technical Editor Ralph Naranjo sailed that boat in a gale-strewn trans-Atlantic with an able crew and encountered a nasty 979-millibar low at about 45 degrees North latitude. According to the log, AP was reaching eastward at 9 knots under storm trysail and storm jib with green water routinely sweeping the deck. Seas had silenced the mini-M satphone by regularly immersing the dome shaped antenna in wave faces, eventually flooding the internal circuitry.

It was a rough passage, and little things taken for granted in smoother seas showed their true value. Features like the deep cockpit well, the heavy-duty, water-tight companionway doors, and the massive cockpit drains all proved their worth.

The flip side of the coin is that really bad weather encounters are a rare occurrence for most sailors. More often, 0- to 20-knot sailing conditions prevail. And our coastline is dotted with safe havens in which to hide from the elements. So one of the big challenges facing every designer and naval architect drawing lines for their next new boat is the question of exposure. Will owners use the boat as a dockside second home and be underway only in fair weather, or will they take the cruiser label to heart and leave land well astern? A close look at cockpit layouts will give you some indication of the boats intended use.

We prefer to evaluate cockpit ergonomics from both static and dynamic points of view. On some boats, these underway and at anchor evaluations lead to disparate conclusions. A cockpit that works well underway may be confining in port, or another vessel with a patio-size stern may be altogether dysfunctional at sea. It’s all an issue of trying to do two different jobs with one fixed set of dimensions and appendages. Buyers need to know what attributes they will make best use of.

For monohulls, coping with heel is the first big challenge, and wide-open space, whether its in the cockpit or main saloon, can be a tough challenge. The universal solution to carrying wide beam aft on cruising boats seems to be the ubiquitous cockpit table. It can be a handy centerline support, but it’s a tough addition to a seafaring cockpit in the minds of many traditional sailors. That said, production boatbuilders have gotten much better at making these centerline, folding-leaf tables sturdy enough for sea duty and effective as a handhold.

Industry Trends

Over the last 50 years, mainstream production sailboat design has moved noticeably away from the racer/cruiser defined by Pearson, Tartan, C&C, Cal, Columbia, Ranger, Islander, Ericson, and others. The new boats are roomier with less emphasis on performance under sail. Racers now have their own genre of sailboat, and they are faster, better handling, and more capable than their predecessors. But whats most surprising is that many mainstream cruisers are anything but optimized for long-distance passages and long-term living aboard.

These boats feature convenience, style, and comfort, and the actual design objective in many cases is more focused on weekend cruising and an annual two-week summer harbor-hopping cruise. Easy sail-setting and large boat interiors in shorter waterline lengths prevail, and such trends influence the shape and layout of the cockpit. When it comes to ergonomics, the split between cruisers and racers is more apparent than ever, but theres also some real differentiation within the ranks of cruisers themselves.

In Practical Sailors recent scrutiny of cockpit designs at local boat shows, weve noted four emerging sailboat stereotypes. These include daysailers that feature few, if any, accommodations; racing boats brimming with performance-enhancing hardware; and ocean-going cruisers capable of extended passagemaking. The fourth grouping-larger than all the other three combined-are also labeled cruisers, but with less draft, less stability, and less versatile sail plans, they are more like an SUV designed more for the highway than off-roading in the backcountry.

Sizing Up a Cockpit

The takeaway lesson for us was the importance of making sure that the cockpit of the boat you are about to buy is in keeping with the mission of the rest of the boat. If you are a serious club racer, the centerline table wont be a crew favorite. Those making a double-handed passage on a 40-footer will see a tight, narrow cockpit differently than when eight sail the same boat. So with complete belief in the old adage, different strokes for different folks, heres what we looked for when evaluating cockpit design. It can be used as a helpful buyers guide when you’re surveying your next boat.

Working the winches: All too often, winch location is an afterthought, and fine hardware is stuck on side coamings shaped more as a roof for the aft cabin than as a key component of sail trim. We always like to check sheet leads angles that lead lines to a particular winch and then mimic what cranking with a two-handed winch handle would be like. Look for 360-degree clearance with no knuckle-busting stanchions in the way. Be sure that the winch grinding works on either tack. Genoa sheeting may always put you on the leeward side of the cockpit, but runners and spinnaker guys will usually be worked on a windward winch.

Sheets and halyards: One of testers major complaints was builders habit of running seldom-used halyard lines attached to roller-furling headsails and in-mast furling mainsails all the way aft to the cockpit. Doing so left lengthy line tails cluttering up the area under the dodger where reefing lines, the boom vang, and in some cases, the main sheet all arrived like too many trains in a station.

Theres no perfect mainsheet arrangement, but some are better than others, and the one you choose has a lot to do with how much attention you pay to the nuance of sail trim. The current vogue among serious racers involves 2-to-1 end-boom sheeting: an in-boom lead of the double-ended sheet returns aft via turning blocks near the mast and runs to winches on both sides of the boat (often referred to as Admirals Cup, or German mainsheet). Fast, no-load hand trimming is the upside, but in any breeze, theres good reason to quickly get the sheet on a winch drum. The sheet tail is shorter because of the low ratio (2-to-1) lead. One nuisance is that the sheet can end up bunched up on one side or the other.

Many cruisers prefer higher ratio, multi-part tackles for mainsheeting and may lead each end to a Harken-type adjustment system rather than using a winch. When fast tacking action is not in the cards, this is a user-friendly system.

Some cruisers incorporate mid-boom sheeting because it moves the tackle out of the cockpit than rather then because of how effectively it allows the mainsail to be trimmed. The shortened lever arm means the sheet needs a winch sooner than later. There is also more of a leech-flattening, vang-like effect to this type of sheeting, not the best feature for light-air efficiency.

The trend toward travelers roosting on over-cockpit arches, a longtime standard in Hunter Yachts and a recent adoption in some Beneteau lines, helps protect the crew from accidental jibe injuries and allows dodgers and biminis to flourish, but windows in these covers are essential, if a crew is to see whats happening whey they are pulling the strings.

Anticipate the angles: Look at how things will change as heel increases and note where vulnerability lies. We recently ran into a crew who had lost an engine due to the shape of the cockpit. During the design phase, the location for an engine instrument recess was placed within easy reach of the person at the helm. In an upright trim-and even at 30 degrees of heel-all was well, but in a knock down when the cockpit began to flood, the engine instruments ended up in a low spot, and despite their sealed all-weather design, submerging them in saltwater had not been part of the engine manufacturers gameplan. The ensuing corrosion took out the panel and the alarm system, and a novice crew failed to notice the changes in sound and smell as a raw-water blockage in the cooling system went critical.

Those headed offshore need to pay special heed to the companionway and have a feel for what angle of heel sends water down an open hatch. Whats a surprise to many is that the first part of the hatch to reach the water may be the top rather than the lower portion of the companionway. Sticking in a washboard or two will help keep a breaking wave from sloshing below, but it may be of little use in a deep knockdown.

Getting in and out: One of the most important safety features of a good boat is the transitional path that leads a crew from the cockpit to the deck. Good engineering focuses on step heights, deck camber, handholds, and the quality of the nonskid surface. This transition in and out of the cockpit is one of the most repeated movements on the vessel. If a dodger, bimini, or Florida room compromises access, they become a hazard. Small, molded steps are of little help in a seaway.

There is no ideal cockpit that meets everyones preferences, and plenty of bad ideas still persist. No matter what your aims are as a sailor, some things deserve to take precedence. Ample space for entertaining friends for sundowners dockside is nice, but comfort underway, including ergonomic seats for sitting or napping, and secure places to steer and stand watch when the boat is heeled should be a higher priority.

Likewise, sight lines and sensible sheet arrangements should come before drink-holders. Next time you prowl the boat show, spend some time exploring the cockpit and comparing features. It is the hub of the boat.

Rating cockpit attributes is a worthwhile endeavor for a serious boat shopper. Start by rating component parts. It will allow you to more effectively compare and contrast one boat with another, according to your specific sailing plans and needs.

For example: Above, we have focused on seven key cockpit attributes and rated five new boats accordingly. Below is a brief explanation of each of the criteria selected. The result of the data table is not a winner-take-all report card. It’s a means of determining what has been emphasized in a specific cockpit design on a wide variety of very different vessels.

Rating for this attribute reflects both the location of a winch and the way in which crew members must bend, lean, or contort themselves while sheeting. We considered how efficiently a manual winch could be cranked and whether or not an electric winch could be safely operated while retaining a clear view of the sail being sheeted or hoisted.

This was not a look at the vessel’s steering hardware, rudder design, or feel of the tiller. It was more focused on helm location and how the person steering the boat could carry on the process comfortably for lengthy periods of time.

We consider the ability to quickly and efficiently reduce and add sail area to be a primary aspect of seamanship. Cockpit layouts teamed up with efficient well-chosen hardware can make or break this facet of cockpit ergonomics. Awkward winch placement, too many lines clustered together around a big bank of rope clutches, and attempting to place sheets, halyards, and reefing lines all in the helmsman’s lap with only one or two undersized winches usually lead to lower ratings.

Collision avoidance requires seeing what’s about to cause trouble well ahead of time, and anything shy of a 360-degree angle of view detracts from the process. We were concerned about view angles and obstructions ranging from dodgers, to deck-sweeping headsails, cabinhouse bulkheads, and other design features that limit the helmsperson’s field of vision. Aboard many multihulls, there’s a growing trend toward providing one perch that offers an all-around view. But when the vessel is operating on autopilot and no one is in the elevated helm seat, watchkeeping efforts are hampered.

When floating on an even keel, it’s easy to get in and out of most cockpits. However, a modest heel of 15 degrees can turn wide-open cockpits with awkward coamings and narrow sidedecks into a hazard. Getting around on a vessel in a seaway requires good nonskid, an abundance of ready handholds, and an unobstructed pathway in and out of the cockpit. Seats need to be usable underway, and the dodger, companionway, and bimini must work in concert.

Short Handing

Because most cruisers sail short-handed, we are always on the look out for features that make watchkeeping more user friendly. These include line leads and winch layouts that allow headsail trimming from the helm and may even offer the chance to tuck or shake a reef from the confine of the cockpit. Crew alone on deck also benefit from deeper-welled open space. Giving the short-handed crew protection from seeping seas and offering well-placed hardware goes a long way to ensure safe, efficient passagemaking.

Entertaining

At anchor and in port, the cockpit changes from an operations center to a backyard patio. Gone is the need for seakeeping attributes, and what counts is how well the area at the aft or center portion of the boat stacks up as a place for stationary fun. Tables that can serve dinner for six or drinks for 10 get high marks. Transoms that fold down, offering access to the sea, are also a current rage. It’s no surprise however, that many of the attributes that drive high scores for entertaining earn a lower grade at sea—the reason many designers and builders have spent time developing fold-up swim platforms and wellreinforced drop-leaf tables ready for sea duty.

VALUE GUIDE: Comparing Cockpit Design

Related articles more from author, leave a reply cancel reply.

Log in to leave a comment

Latest Videos

An Italian Go Fast Sailboat – The Viko S 35 |...

What Is The Best Folding Bike For Your Sailboat?

The No Expense Spared Antigua 60 Cruising Sailboat Soolaimon

How To Buy Sails – With Joe Cooper

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

• For Sale/Wanted
• Readers Tips
• Your Yarns.
• Restoration
• Miscellaneous
• DIY Boat Yards
• Boat Building
• Cabin Cruisers
• Free Boat Plans
• Begin Boating
• Boating Terms
• Ropes and Rigs
• Just for Fun
• Celestial Navigation
• Passage Planning
• VHF Marine Radio
• Diagonal Scale

Sailboat Plans

Free Sailboat Plans

A selection of some of the Free Sailboat Plans (pdf) that were published in magazines such as “Popular Mechanics”, "Popular Science" and the "Boat Builder Handbook".

If you need help with lofting out the plans click here for an article here which should help.

• Open Dayboats/Dinghys
• Rowing Boats

Open/Dayboat, Free Sailboat Plans

Everyone who digs boating has heard of the Hobie Cat, the sleek little catamaran that burst on the scene and captured the attention of all the fast-action sailors.

Marked by asymmetrical hulls and special trampoline supports, the Hobie can reach speeds above 20 mph and perform with a rare agility.

But it has one drawback.

It costs mucho dinero.

Thus, we introduce the Hobby Kat, sailboat plans, a build-it-yourself version of the “Hobie” that should cost from half to a third of the commercial version. If you have the moola, of course, go for a Hobie and have the time of your life on the water.

If not, try our Hobby

The homebuilt is not quite the same.

But she sails sweetly and fast—qualities which have made the “Hobie” popular

Even in a light air she’ll slip through the water at a fast clip.

She has no centreboards, leeboards or keel, and needs none.

The inside of each hull has built-in lift, like an airplane wing, so that as the boat heels and one hull digs in the boat is pulled back to windward.

Click Here for the Plans

She can run in very shallow water and the rudders kick up for beaching.

You can carry her on a trailer or even disassemble her.

Many a “stink pot” addict will take a second look at Tern because she planes in modest breezes, is easy to handle, and her streamlined prow arid pod-shaped, “inland scow” type hull offer slight water resistance. Then too, there’s a charm about the tiller of a sailer that’s not matched by the wheel of a motor-powered boat. Part of it is the challenge of making the most of nature’s free-wheeling breezes. Even with her 72sq.ft of sail, this Free Sailboat Plan is remarkably stable, and packs as many as four persons aboard

For thousands of inland lakes, Tern is the answer to sailing water sport, she is rugged and easy to launch

And she’s remarkably easy to build.

Falcon is a small, speedy, sporty sailboat which handles well. Tests on the original Falcon showed that she could easily out-distance boats of comparable size such as the one design class Snipe and Comet sailers.

And she will pace neck and neck with 18 footers with considerably greater sail spread.

This strong, beamy, eight-foot pram may be sailed either cat-rigged or sloop-rigged.

The dagger-board may be adjusted forward to balance the helm when sailing with the addition of a jib sail.

Oars or a small outboard motor may also be used to power this versatile Free Sailboat Plans.

Dart” is a small two or three person sailing craft, designed for use on protected waters such as bays. lakes, rivers or wherever sheltered waters are found. Its construction will repay the builder handsomely and provide a fast sailing craft, light in weight, easily transportable and cheap to construct with all difficult joinery eliminated

It provides thrilling and economical sport.

The 'Crescent', designed by C. T. Allen, is the ideal sailboat for day sailing on a small lake, river, or protected waters of a bay.

Centreboard design (Fig. 2) reduces Crescent's draft, so Shallow is not a problem.

Its broad beam of over 5½ft. makes it an ideal family boat because there is room for a cockpit large enough to accommodate four adults or two adults and three kids, and side and forward decks big enough to stretch out on when sun bathing.

"Jewel" is a 16' Crescent Sailboat being built by Mike Allen from the free sailboat plans by C.T .Allen in the 1958 "Boat Builders Handbook". And what a superb job Mike is doing check out his photos here .

Click Here for the Free version of the Plans

Sailing enthusiasts and backyard boat builders are not likely to find free boat plans for a sailing pram that can be built faster, lighter, stronger, or less expensively than Graefin-10. Two men can begin work on a Friday evening and have a smart, lively 10-ft. 85-pound sailboat in the water by Sunday evening (it’s been done).

Zephyr Is a refinement of a type of boat developed by the English for use in the rough open waters of the English Channel. Not only is it fast under sail, but it can stand up under punishment. And it’s light enough to be easily loaded atop an auto or light trailer.

Breeze-Baby

Skimming off a brisk wind or with the wind abeam, Breeze-Baby actually planes with one person aboard. Despite her rowboat lines that make her easy to build, she handles easily under her simple sail, an ideal first boat. Simple lines are adapted to plywood construction that’s strong, light and that keeps Breeze-Baby’s bilges dry

You can take her with you atop your car or on a lightweight trailer for summer fun wherever you vacation or get in a week-end’s sailing.

Cat’s Paw is easy to build because of the straight-sided hulls. The sheer line is flat and that simplifies building the form. Bow and stern are straight, so there’s no cockeyed bevel to fit and fuss with

She Is an Ideal boat to learn or practice sailing in because she will forgive so many mistakes.

Cabin Cruiser, Free Sailboat Plans

Previous posts

See What Others Have Posted

Recent Articles

Chris Craft Boats

May 21, 24 06:16 AM

• Boat Plan Books
• Boatbuilding Tips
• Glass Cloth
• Stitch and Glue
• Strip Plank

You might like these

The Ashcroft Method of Planking a Wooden Boat

The Ashcroft method of building small wooden boats, an early from of cold moulding using thin layers of wood with the layers all running same direction.

Plywood and Veneer Guide for Marine use.

A guide to plywood for boat building and why you should use the best marine grade you can afford.

DIY Woodboat Building Questions

Woodboat building questions a Forum for wooden boat building, plans, lumber, caulking compounds and other boat building problems.

Boat Books for Wooden Boat Builders

Boat Books a series of boat books based on some of the 1960's, classic, Free Boat Plans that were published in magazines such as "Popular Mechanics", "Popular Science" and the "Boat Builder Handbook".

Build a Boat, tips for the DIY Wooden Boat Builder.

How to Build a Boat, Wooden Boat Building methods for the DIY, backyard, self-builders explained, carvel, lapstrake and plywood

Clench Nails, Fastening for Small Wooden Boats.

How to use Clench Nails, these provide a fast reliable method for fastening small wooden boats.

Wood Screws for Boat Building and Repair.

Wood Screws are the most widely used and versatile fasteners used on wooden boats. Which type to use and how to use them

Timber, Lumber for Boat Building.

A brief description of the most common Timber used for building Wooden Boats how to choose wood for your project boat

Timber Properties

A brief guide to timber properties and wood, characteristics such as strength, stiffness and elasticity for choosing lumber for wooden boat building and restoration.

Rivets and Copper Rove Wood Boat Fastenings.

How to use Copper Rivets and Roves construction guide to fasteners on your wooden boat.

Free Motorboat Plans

Free Motorboat Plans for the backyard home builder, build your own speed boat, cabin cruiser, runabout or utility boat using these simple plywood designs.

Wooden Boat Kits.

Wooden boat building is easy and inexpensive with wooden boat kits. From row boats and kayaks to sailing cruisers, boat to be proud of

Supplies for Wooden Boat building and Maintenance

Supplies for Wooden Boat Building and restoration, how to choose the materials and marine chandlery for your project.

DIY Woodboat Questions

Woodboat questions and answers forum for all Wooden Boat owners, advice and opinions on all aspects of wooden boat building, restoration and maintenance.

Small Boats, Made of Wood

What Everybody ought to know about building Small Boats, guidance and tips for self-building or restoring.

Automatic Identification System AIS

May 18, 24 05:01 AM

Wooden Boat Events 2024

Apr 14, 24 05:15 AM

Chris Craft Boats, wooden boats

Woodboat Restoration questions forum

Woodboat restoration questions Forum, get advice about your Wooden Boat problems in a free, no frills, no need to sign up forum

Epoxy Resin for DIY Wooden Boat Building.

A guide to the epoxy resins and sustainable enrtopy resins to use when building wooden boats with marine plywood.

Privacy Policy

Advertising Policy

Cookie Policy

I am perfectly aware that the majority of Wooden Boat aficionados are sensible folk. However, I need to point out that I am an amateur wooden boat enthusiast simply writing in order to try to help other amateur wooden boat enthusiasts. And while I take every care to ensure that the information in DIY Wood Boat.com is correct, anyone acting on the information on this website does so at their own risk.

DIY Boat Building Plans

Small Boat Plans & Blueprints

Download over 500 Boat Plans. Click on the link below.

-->click here<--.

Table of Contents

Overview of Small Boat Plans & Blueprints

Small boats have long captured the imagination of adventurous souls, offering a sense of freedom, exploration, and connection with the water. Whether you’re an experienced sailor or a newcomer to the world of boating, the allure of building your own small boat can be irresistible. At the heart of this endeavor lie the small boat plans and blueprints, which serve as the roadmap to transforming your dreams into a tangible reality. Defining small boats can be a subjective task, but for the purposes of this article, we’ll consider them to be vessels that are typically less than 30 feet in length and can be easily transported and launched by a small crew. These compact and maneuverable boats hold a special appeal, allowing for intimate encounters with the water, whether it’s a peaceful day on a lake, a thrilling ride through coastal waters, or a serene exploration of a meandering river. The role of plans and blueprints in small boat construction cannot be overstated. These detailed technical drawings provide the essential information needed to bring your vision to life, ensuring the structural integrity, safety, and functionality of your vessel. By following these comprehensive guides, even novice boat builders can embark on the rewarding journey of creating their own custom-built small boat, tailored to their specific needs and preferences.

Key Takeaways

• Small boat plans and blueprints are essential for successful boat construction
• Detailed plans are important for ensuring accuracy and avoiding mistakes
• Choosing the right design and materials is crucial for a functional and safe boat
• Understanding and interpreting boat blueprints requires careful attention to detail
• Customizing plans to fit your specific needs can result in a truly unique and personalized boat

The Importance of Detailed Boat Plans

Constructing a small boat requires a meticulous attention to detail, and the importance of having access to detailed plans and blueprints cannot be overstated. These technical documents serve as the foundation for ensuring the structural integrity and safety of your vessel, guiding you through every step of the construction process. Detailed boat plans are essential for maintaining the structural integrity and safety of your small boat. They provide the necessary information to calculate the appropriate materials, dimensions, and load-bearing capacities, ensuring that your vessel can withstand the rigors of the water without compromising the safety of its occupants. By following the precise specifications outlined in the plans, you can have confidence that your boat will be able to navigate the waterways with stability and reliability. Furthermore, the detailed nature of boat plans and blueprints facilitates the construction process, serving as a comprehensive roadmap that guides you through each phase of the build. From the initial layout and framing to the installation of the hull , deck , and rigging, the plans provide clear instructions and diagrams that help you stay organized, efficient, and on track. This level of guidance is particularly valuable for first-time boat builders, who can rely on the plans to navigate the complexities of the construction process. Customization and personalization are also key benefits of working with detailed boat plans. These technical documents often provide flexibility in design, allowing you to incorporate your own preferences and modifications to create a truly unique vessel. Whether it’s adjusting the dimensions, incorporating specialized features, or adding personal touches, the plans serve as a flexible framework that enables you to tailor the boat to your specific needs and desires. This level of customization can be a deeply rewarding aspect of the boat-building experience.

Choosing the Right Small Boat Design

Selecting the right small boat design is a crucial step in the boat-building process, as it sets the foundation for the entire project. When it comes to choosing the perfect design, several factors must be considered, including the intended use of the boat, its size, and the skill level of the builder. The intended use of the small boat is a primary factor to consider when selecting a design. Are you planning to use the boat for recreational activities, such as fishing, sailing, or leisurely cruising? Or do you have more specialized needs, like racing or exploring remote waterways? Understanding the specific purpose of your boat will help you narrow down the design options and ensure that the final product meets your requirements. Equally important is the size of the boat, which can vary greatly depending on the intended use and the builder’s skill level. Smaller boats, typically under 20 feet in length, may be more suitable for beginners or those with limited space for storage and transportation. Larger small boats , up to 30 feet, offer more versatility and can accommodate more passengers or gear, but may require more advanced building skills and resources. When researching and evaluating different small boat designs, it’s essential to balance functionality, aesthetics, and personal preferences. Explore a variety of designs, from classic wooden sailboats to modern fiberglass motorboats, and consider how each option aligns with your intended use, skill level, and visual preferences. Consulting with experienced boat builders or attending boat-building workshops can also provide valuable insights and guidance in the decision-making process. Ultimately, the right small boat design is the one that strikes a harmonious balance between your needs, abilities, and aspirations. By carefully considering these factors and thoroughly researching your options, you can make an informed decision that sets the stage for a successful and rewarding boat-building experience.

Understanding the Components of Boat Plans

Navigating the intricate world of boat plans and blueprints can be a daunting task, especially for first-time boat builders. However, by familiarizing yourself with the different components of these technical documents, you can unlock a deeper understanding of the construction process and ensure a smoother journey from design to completion. At the heart of any boat plan lies a series of detailed technical drawings, each offering a unique perspective on the vessel’s structure and components. These may include plan views, which provide a top-down look at the boat’s layout; profile views, which showcase the side profile; and various cross-sectional views, which reveal the internal construction details. Mastering the interpretation of these different views is crucial for visualizing the three-dimensional form of the boat and translating the information into practical steps. Accompanying the technical drawings are a wealth of specifications and measurements, detailing everything from the dimensions of the hull and deck to the size and placement of individual components. Understanding the significance of these numerical values and their relationship to the overall design is essential for ensuring the structural integrity and proper fit of the boat’s parts. Familiarizing yourself with common boat-building terminology is another important aspect of interpreting boat plans. Terms like “chine,” “transom,” and “sheer” may seem foreign at first, but becoming acquainted with these specialized words and their meanings will help you navigate the technical language and better comprehend the construction process. Ultimately, the ability to accurately read and interpret boat plans is a crucial skill for any aspiring small boat builder. By investing time in understanding the different components and their significance, you can develop a comprehensive understanding of the boat’s design, which will serve as a solid foundation for the construction phase and help you overcome any challenges that may arise along the way.

Selecting the Appropriate Materials for Your Boat

Choosing the right materials for your small boat construction is a crucial step that can have a significant impact on the overall performance, durability, and aesthetics of the final product. As you delve into the world of boat plans and blueprints, it’s essential to carefully consider the various material options and how they align with the specific requirements of your chosen design. When it comes to small boat construction, the most common materials used include wood, fiberglass, and aluminum. Each of these materials has its own unique set of characteristics, strengths, and weaknesses, and the selection process should be guided by the intended use of the boat, the desired level of performance, and your personal preferences. Wooden boats , for instance, offer a classic and timeless appeal, with the ability to be customized and personalized to a high degree. However, they also require more maintenance and can be susceptible to environmental factors like moisture and weathering. Fiberglass, on the other hand, is known for its durability, low maintenance, and ability to withstand the rigors of the water, making it a popular choice for recreational and performance-oriented small boats. Aluminum, meanwhile, is prized for its strength, corrosion resistance, and lightweight properties, making it a suitable option for boats that need to be easily transported or launched. Beyond the inherent properties of the materials, it’s also crucial to consider the availability, cost, and ease of working with them. Some materials may be more readily accessible in your local area, while others may require specialized suppliers or additional processing. Additionally, the budget you have allocated for your small boat project can play a significant role in the material selection process, as certain options may be more cost-effective than others. By carefully weighing the various factors and aligning the material choices with the specific requirements of your boat design, you can ensure that your small boat not only meets your functional needs but also reflects your personal style and preferences. Consulting with experienced boat builders or material suppliers can also provide valuable insights and guidance in the decision-making process.

Step-by-Step Guide to Reading and Interpreting Boat Blueprints

Deciphering the intricate details of boat blueprints can be a daunting task, but with a systematic approach and a keen eye for detail, you can unlock the wealth of information they contain. As you embark on your small boat-building journey, mastering the art of reading and interpreting these technical documents will be a crucial skill that will guide you through every step of the construction process. The first step in understanding boat blueprints is to familiarize yourself with the different views and perspectives presented. These may include plan views, which provide a top-down look at the boat’s layout; profile views, showcasing the side profile; and various cross-sectional views, revealing the internal construction details. By studying these different perspectives, you can develop a comprehensive understanding of the boat’s three-dimensional form and how the various components fit together. Next, it’s essential to closely examine the technical specifications and measurements provided in the blueprints. These numerical values hold the key to ensuring the structural integrity and proper fit of the boat’s parts. From the dimensions of the hull and deck to the size and placement of individual components, every detail must be meticulously recorded and translated into practical steps during the construction process. As you delve deeper into the blueprints, familiarize yourself with the common boat-building terminology used. Terms like “chine,” “transom,” and “sheer” may seem foreign at first, but understanding their meanings and how they relate to the overall design will greatly enhance your ability to interpret the technical information. With a solid grasp of the different views, measurements, and terminology, you can then begin to develop a comprehensive construction plan. By carefully translating the blueprint information into a step-by-step guide, you can ensure that every aspect of the build is executed with precision and attention to detail, minimizing the risk of errors or unexpected challenges. Mastering the art of reading and interpreting boat blueprints is a crucial skill that will serve you well throughout the small boat-building process. By approaching this task with patience, diligence, and a keen eye for detail, you can unlock the full potential of your chosen design and bring your dream boat to life.

Customizing Small Boat Plans to Fit Your Needs

The beauty of building your own small boat lies in the ability to customize the design to suit your unique needs and preferences. While the boat plans and blueprints provide a solid foundation, the true joy of the process often comes from incorporating your personal touch and making the vessel your own. One of the primary ways to customize small boat plans is by modifying the design to accommodate your specific requirements. This could involve adjusting the dimensions to better fit your available space or desired carrying capacity, or incorporating additional features or accessories that enhance the functionality of the boat. Whether it’s adding specialized storage compartments, upgrading the propulsion system, or incorporating unique aesthetic elements, the plans serve as a flexible framework that allows you to tailor the boat to your liking. Addressing site-specific constraints or limitations is another important aspect of customizing small boat plans. If you have limited access to a launch site, for example, you may need to adjust the boat’s size or weight to ensure it can be easily transported and launched. Similarly, if you plan to use the boat in a particular body of water with unique environmental conditions, you may need to modify the design to optimize its performance and safety. Collaborating with experienced boat designers or builders can be an invaluable resource when it comes to customizing small boat plans. These professionals can provide guidance on the feasibility of your proposed modifications, offer suggestions for enhancing the design, and help you navigate any technical or structural challenges that may arise. By tapping into their expertise, you can ensure that your customizations not only meet your personal preferences but also maintain the integrity and functionality of the boat. Ultimately, the ability to customize small boat plans is what makes the building process so rewarding and fulfilling. By infusing your own creativity and personal touch into the design, you can create a truly unique vessel that reflects your individual style and meets your specific needs. Whether it’s a subtle modification or a complete redesign, the flexibility of the plans allows you to bring your vision to life and take pride in the one-of-a-kind small boat you’ve created.

Tips for Successful Small Boat Construction

Building your own small boat is a deeply rewarding and challenging endeavor, one that requires a combination of technical skills, attention to detail, and perseverance. As you embark on this journey, guided by the boat plans and blueprints, it’s essential to equip yourself with the right tools and strategies to ensure a successful and satisfying outcome. Establishing a well-organized workspace and work schedule is a crucial first step. Designate a dedicated area for your boat-building project, ensuring that it is spacious enough to accommodate the various stages of construction and provides ample lighting and ventilation. Additionally, develop a detailed work schedule that takes into account the time required for each phase of the build, allowing you to stay on track and maintain momentum throughout the process. Developing essential boat-building skills and techniques is another key factor in achieving success. Whether it’s mastering the art of woodworking, learning the intricacies of fiberglass layup, or honing your welding abilities, investing time and effort into building your practical skills will pay dividends as you navigate the construction process. Consider seeking out workshops, tutorials, or mentorship opportunities to enhance your knowledge and confidence. Troubleshooting common challenges and finding solutions is an inevitable part of any boat-building endeavor. From unexpected material issues to structural problems, be prepared to encounter obstacles along the way. By approaching these challenges with a problem-solving mindset, consulting the boat plans and blueprints, and seeking guidance from experienced builders, you can overcome these hurdles and maintain the integrity of your project. Throughout the construction process, it’s crucial to maintain a meticulous attention to detail and quality. Every measurement, every joint, and every component must be carefully executed to ensure the structural integrity and functionality of your small boat. Regularly refer back to the plans, double-check your work, and be willing to take the time necessary to get each step right, even if it means slowing down the overall pace of the build. By embracing these tips and strategies, you can navigate the small boat construction process with confidence and a sense of accomplishment. The journey may be challenging, but the reward of seeing your dream boat come to life, and the pride of having built it with your own hands, will make it all worthwhile.

The Benefits of Building Your Own Small Boat

The decision to build your own small boat is one that can be deeply rewarding, both in terms of personal satisfaction and practical benefits. As you embark on this journey, guided by the detailed plans and blueprints, you’ll unlock a world of opportunities that extend far beyond the physical construction of the vessel. One of the most profound rewards of building your own small boat is the sense of accomplishment and personal satisfaction that comes with it. Watching your vision take shape, overcoming challenges, and ultimately launching a boat that you’ve created with your own hands is a truly empowering experience. This sense of achievement can instill a newfound confidence and appreciation for the art of boat building , inspiring you to continue exploring and expanding your skills. In addition to the personal fulfillment, building your own small boat can also be a cost-effective alternative to purchasing a pre-built vessel. By sourcing materials and components directly, and leveraging your own labor, you can often create a boat that is tailored to your needs and preferences at a fraction of the cost of a commercially available model. This financial advantage can open up new opportunities for exploration, adventure, and recreational activities on the water. Beyond the practical and financial benefits, the process of building your own small boat can foster a deeper appreciation for the art of boat building and the rich history of watercraft design. As you delve into the technical details of the plans and blueprints, you’ll gain a newfound understanding and respect for the craftsmanship and engineering that goes into creating these vessels. This knowledge can enrich your overall boating experience and inspire you to continue learning and exploring the world of small boat design and construction. Ultimately, the decision to build your own small boat is a testament to your adventurous spirit, your desire for personalization, and your willingness to take on a rewarding challenge. By embracing the detailed plans and blueprints as your guide, you can transform your dreams into a tangible reality, creating a unique and customized vessel that will serve as a source of joy, exploration, and lasting memories for years to come.

Conclusion – Small Boat Plans & Blueprints

In conclusion, small boat plans and blueprints are invaluable resources for anyone interested in building their own small boat. They provide a clear and structured path to follow, ensuring accuracy, safety, and efficiency throughout the construction process. By choosing the right plans, following instructions carefully, and paying attention to detail, you can create a small boat that meets your needs and preferences.

Remember that building a small boat can be a challenging yet rewarding endeavor, offering opportunities for creativity and skill development. Whether you’re a DIY enthusiast or a professional boat builder, the journey of bringing your small boat to life is a testament to your dedication and passion for the craft. Embrace the process, seek assistance when necessary, and enjoy the satisfaction of cruising the water in a vessel you’ve built with your own hands. Happy boat building!

FAQs – Small Boat Plans & Blueprints

What are small boat plans and blueprints.

Small boat plans and blueprints are detailed instructions and diagrams that guide boat builders in constructing small boats. These plans typically include information on the materials needed, measurements, and step-by-step instructions for building the boat.

What types of small boats can be built using plans and blueprints?

There are many types of small boats that can be built using plans and blueprints, including rowboats, sailboats, canoes , kayaks , and dinghies . The specific plans and blueprints needed will depend on the type of boat being built.

Where can I find small boat plans and blueprints?

Small boat plans and blueprints can be found online, in boating magazines, and at boating supply stores. There are also many websites that specialize in selling boat plans and blueprints.

Do I need any special skills to build a small boat using plans and blueprints?

While some experience with woodworking and boat building can be helpful, many small boat plans and blueprints are designed for beginners. With careful attention to detail and following the instructions closely, anyone can build a small boat using plans and blueprints.

What materials are needed to build a small boat using plans and blueprints?

The materials needed to build a small boat will depend on the specific plans and blueprints being used. However, common materials include wood, fiberglass, epoxy, and marine-grade hardware. It is important to use high-quality materials to ensure the boat is safe and durable.

How long does it take to build a small boat using plans and blueprints?

The time it takes to build a small boat using plans and blueprints will depend on the size and complexity of the boat, as well as the builder’s experience and skill level. Some small boats can be built in a few days, while others may take several weeks or even months to complete.

Written by DIY Boat Building Plans

How To Build a Utility Boat

How to Build a Dinghy

The Ultimate Guide to Sail Types and Rigs (with Pictures)

What's that sail for? Generally, I don't know. So I've come up with a system. I'll explain you everything there is to know about sails and rigs in this article.

What are the different types of sails? Most sailboats have one mainsail and one headsail. Typically, the mainsail is a fore-and-aft bermuda rig (triangular shaped). A jib or genoa is used for the headsail. Most sailors use additional sails for different conditions: the spinnaker (a common downwind sail), gennaker, code zero (for upwind use), and stormsail.

Each sail has its own use. Want to go downwind fast? Use a spinnaker. But you can't just raise any sail and go for it. It's important to understand when (and how) to use each sail. Your rigging also impacts what sails you can use.

On this page:

Different sail types, the sail plan of a bermuda sloop, mainsail designs, headsail options, specialty sails, complete overview of sail uses, mast configurations and rig types.

This article is part 1 of my series on sails and rig types. Part 2 is all about the different types of rigging. If you want to learn to identify every boat you see quickly, make sure to read it. It really explains the different sail plans and types of rigging clearly.

Guide to Understanding Sail Rig Types (with Pictures)

First I'll give you a quick and dirty overview of sails in this list below. Then, I'll walk you through the details of each sail type, and the sail plan, which is the godfather of sail type selection so to speak.

Click here if you just want to scroll through a bunch of pictures .

Here's a list of different models of sails: (Don't worry if you don't yet understand some of the words, I'll explain all of them in a bit)

• Jib - triangular staysail
• Genoa - large jib that overlaps the mainsail
• Spinnaker - large balloon-shaped downwind sail for light airs
• Gennaker - crossover between a Genoa and Spinnaker
• Code Zero or Screecher - upwind spinnaker
• Drifter or reacher - a large, powerful, hanked on genoa, but made from lightweight fabric
• Windseeker - tall, narrow, high-clewed, and lightweight jib
• Trysail - smaller front-and-aft mainsail for heavy weather
• Storm jib - small jib for heavy weather

I have a big table below that explains the sail types and uses in detail .

I know, I know ... this list is kind of messy, so to understand each sail, let's place them in a system.

The first important distinction between sail types is the placement . The mainsail is placed aft of the mast, which simply means behind. The headsail is in front of the mast.

Generally, we have three sorts of sails on our boat:

• Mainsail: The large sail behind the mast which is attached to the mast and boom
• Headsail: The small sail in front of the mast, attached to the mast and forestay (ie. jib or genoa)
• Specialty sails: Any special utility sails, like spinnakers - large, balloon-shaped sails for downwind use

The second important distinction we need to make is the functionality . Specialty sails (just a name I came up with) each have different functionalities and are used for very specific conditions. So they're not always up, but most sailors carry one or more of these sails.

They are mostly attached in front of the headsail, or used as a headsail replacement.

The specialty sails can be divided into three different categories:

• downwind sails - like a spinnaker
• light air or reacher sails - like a code zero
• storm sails

The parts of any sail

Whether large or small, each sail consists roughly of the same elements. For clarity's sake I've took an image of a sail from the world wide webs and added the different part names to it:

• Head: Top of the sail
• Tack: Lower front corner of the sail
• Foot: Bottom of the sail
• Luff: Forward edge of the sail
• Leech: Back edge of the sail
• Clew: Bottom back corner of the sail

So now we speak the same language, let's dive into the real nitty gritty.

Basic sail shapes

Roughly speaking, there are actually just two sail shapes, so that's easy enough. You get to choose from:

• square rigged sails
• fore-and-aft rigged sails

I would definitely recommend fore-and-aft rigged sails. Square shaped sails are pretty outdated. The fore-and-aft rig offers unbeatable maneuverability, so that's what most sailing yachts use nowadays.

Square sails were used on Viking longships and are good at sailing downwind. They run from side to side. However, they're pretty useless upwind.

A fore-and-aft sail runs from the front of the mast to the stern. Fore-and-aft literally means 'in front and behind'. Boats with fore-and-aft rigged sails are better at sailing upwind and maneuvering in general. This type of sail was first used on Arabic boats.

As a beginner sailor I confuse the type of sail with rigging all the time. But I should cut myself some slack, because the rigging and sails on a boat are very closely related. They are all part of the sail plan .

A sail plan is made up of:

• Mast configuration - refers to the number of masts and where they are placed
• Sail type - refers to the sail shape and functionality
• Rig type - refers to the way these sails are set up on your boat

There are dozens of sails and hundreds of possible configurations (or sail plans).

For example, depending on your mast configuration, you can have extra headsails (which then are called staysails).

The shape of the sails depends on the rigging, so they overlap a bit. To keep it simple I'll first go over the different sail types based on the most common rig. I'll go over the other rig types later in the article.

Bermuda Sloop: the most common rig

Most modern small and mid-sized sailboats have a Bermuda sloop configuration . The sloop is one-masted and has two sails, which are front-and-aft rigged. This type of rig is also called a Marconi Rig. The Bermuda rig uses a triangular sail, with just one side of the sail attached to the mast.

The mainsail is in use most of the time. It can be reefed down, making it smaller depending on the wind conditions. It can be reefed down completely, which is more common in heavy weather. (If you didn't know already: reefing is skipper terms for rolling or folding down a sail.)

In very strong winds (above 30 knots), most sailors only use the headsail or switch to a trysail.

The headsail powers your bow, the mainsail powers your stern (rear). By having two sails, you can steer by using only your sails (in theory - it requires experience). In any case, two sails gives you better handling than one, but is still easy to operate.

Let's get to the actual sails. The mainsail is attached behind the mast and to the boom, running to the stern. There are multiple designs, but they actually don't differ that much. So the following list is a bit boring. Feel free to skip it or quickly glance over it.

• Square Top racing mainsail - has a high performance profile thanks to the square top, optional reef points
• Racing mainsail - made for speed, optional reef points
• Cruising mainsail - low-maintenance, easy to use, made to last. Generally have one or multiple reef points.
• Full-Batten Cruising mainsail - cruising mainsail with better shape control. Eliminates flogging. Full-length battens means the sail is reinforced over the entire length. Generally have one or multiple reef points.
• High Roach mainsail - crossover between square top racing and cruising mainsail, used mostly on cats and multihulls. Generally have one or multiple reef points.
• Mast Furling mainsail - sails specially made to roll up inside the mast - very convenient but less control; of sail shape. Have no reef points
• Boom Furling mainsail - sails specially made to roll up inside the boom. Have no reef points.

The headsail is the front sail in a front-and-aft rig. The sail is fixed on a stay (rope, wire or rod) which runs forward to the deck or bowsprit. It's almost always triangular (Dutch fishermen are known to use rectangular headsail). A triangular headsail is also called a jib .

Headsails can be attached in two ways:

• using roller furlings - the sail rolls around the headstay
• hank on - fixed attachment

Types of jibs:

Typically a sloop carries a regular jib as its headsail. It can also use a genoa.

• A jib is a triangular staysail set in front of the mast. It's the same size as the fore-triangle.
• A genoa is a large jib that overlaps the mainsail.

What's the purpose of a jib sail? A jib is used to improve handling and to increase sail area on a sailboat. This helps to increase speed. The jib gives control over the bow (front) of the ship, making it easier to maneuver the ship. The mainsail gives control over the stern of the ship. The jib is the headsail (frontsail) on a front-and-aft rig.

The size of the jib is generally indicated by a number - J1, 2, 3, and so on. The number tells us the attachment point. The order of attachment points may differ per sailmaker, so sometimes J1 is the largest jib (on the longest stay) and sometimes it's the smallest (on the shortest stay). Typically the J1 jib is the largest - and the J3 jib the smallest.

Most jibs are roller furling jibs: this means they are attached to a stay and can be reefed down single-handedly. If you have a roller furling you can reef down the jib to all three positions and don't need to carry different sizes.

Originally called the 'overlapping jib', the leech of the genoa extends aft of the mast. This increases speed in light and moderate winds. A genoa is larger than the total size of the fore-triangle. How large exactly is indicated by a percentage.

• A number 1 genoa is typically 155% (it used to be 180%)
• A number 2 genoa is typically 125-140%

Genoas are typically made from 1.5US/oz polyester spinnaker cloth, or very light laminate.

This is where it gets pretty interesting. You can use all kinds of sails to increase speed, handling, and performance for different weather conditions.

Some rules of thumb:

• Large sails are typically good for downwind use, small sails are good for upwind use.
• Large sails are good for weak winds (light air), small sails are good for strong winds (storms).

Downwind sails

Thanks to the front-and-aft rig sailboats are easier to maneuver, but they catch less wind as well. Downwind sails are used to offset this by using a large sail surface, pulling a sailboat downwind. They can be hanked on when needed and are typically balloon shaped.

Here are the most common downwind sails:

• Big gennaker
• Small gennaker

A free-flying sail that fills up with air, giving it a balloon shape. Spinnakers are generally colorful, which is why they look like kites. This downwind sail has the largest sail area, and it's capable of moving a boat with very light wind. They are amazing to use on trade wind routes, where they can help you make quick progress.

Spinnakers require special rigging. You need a special pole and track on your mast. You attach the sail at three points: in the mast head using a halyard, on a pole, and on a sheet.

The spinnaker is symmetrical, meaning the luff is as long as its leech. It's designed for broad reaching.

Gennaker or cruising spinnaker

The Gennaker is a cross between the genoa and the spinnaker. It has less downwind performance than the spinnaker. It is a bit smaller, making it slower, but also easier to handle - while it remains very capable. The cruising spinnaker is designed for broad reaching.

The gennaker is a smaller, asymmetric spinnaker that's doesn't require a pole or track on the mast. Like the spinnaker, and unlike the genoa, the gennaker is set flying. Asymmetric means its luff is longer than its leech.

You can get big and small gennakers (roughly 75% and 50% the size of a true spinnaker).

Also called ...

• the cruising spinnaker
• cruising chute
• pole-less spinnaker
• SpinDrifter

... it's all the same sail.

Light air sails

There's a bit of overlap between the downwind sails and light air sails. Downwind sails can be used as light air sails, but not all light air sails can be used downwind.

Here are the most common light air sails:

• Spinnaker and gennaker

Drifter reacher

Code zero reacher.

A drifter (also called a reacher) is a lightweight, larger genoa for use in light winds. It's roughly 150-170% the size of a genoa. It's made from very lightweight laminated spinnaker fabric (1.5US/oz).

Thanks to the extra sail area the sail offers better downwind performance than a genoa. It's generally made from lightweight nylon. Thanks to it's genoa characteristics the sail is easier to use than a cruising spinnaker.

The code zero reacher is officially a type of spinnaker, but it looks a lot like a large genoa. And that's exactly what it is: a hybrid cross between the genoa and the asymmetrical spinnaker (gennaker). The code zero however is designed for close reaching, making it much flatter than the spinnaker. It's about twice the size of a non-overlapping jib.

A windseeker is a small, free-flying staysail for super light air. It's tall and thin. It's freestanding, so it's not attached to the headstay. The tack attaches to a deck pad-eye. Use your spinnakers' halyard to raise it and tension the luff.

It's made from nylon or polyester spinnaker cloth (0.75 to 1.5US/oz).

It's designed to guide light air onto the lee side of the main sail, ensuring a more even, smooth flow of air.

Stormsails are stronger than regular sails, and are designed to handle winds of over 45 knots. You carry them to spare the mainsail. Sails

A storm jib is a small triangular staysail for use in heavy weather. If you participate in offshore racing you need a mandatory orange storm jib. It's part of ISAF's requirements.

A trysail is a storm replacement for the mainsail. It's small, triangular, and it uses a permanently attached pennant. This allows it to be set above the gooseneck. It's recommended to have a separate track on your mast for it - you don't want to fiddle around when you actually really need it to be raised ... now.

Why Use Different Sails At All?

You could just get the largest furling genoa and use it on all positions. So why would you actually use different types of sails?

The main answer to that is efficiency . Some situations require other characteristics.

Having a deeply reefed genoa isn't as efficient as having a small J3. The reef creates too much draft in the sail, which increases heeling. A reefed down mainsail in strong winds also increases heeling. So having dedicated (storm) sails is probably a good thing, especially if you're planning more demanding passages or crossings.

But it's not just strong winds, but also light winds that can cause problems. Heavy sails will just flap around like laundry in very light air. So you need more lightweight fabrics to get you moving.

What Are Sails Made Of?

The most used materials for sails nowadays are:

• Dacron - woven polyester
• woven nylon
• laminated fabrics - increasingly popular

Sails used to be made of linen. As you can imagine, this is terrible material on open seas. Sails were rotting due to UV and saltwater. In the 19th century linen was replaced by cotton.

It was only in the 20th century that sails were made from synthetic fibers, which were much stronger and durable. Up until the 1980s most sails were made from Dacron. Nowadays, laminates using yellow aramids, Black Technora, carbon fiber and Spectra yarns are more and more used.

Laminates are as strong as Dacron, but a lot lighter - which matters with sails weighing up to 100 kg (220 pounds).

By the way: we think that Viking sails were made from wool and leather, which is quite impressive if you ask me.

In this section of the article I give you a quick and dirty summary of different sail plans or rig types which will help you to identify boats quickly. But if you want to really understand it clearly, I really recommend you read part 2 of this series, which is all about different rig types.

You can't simply count the number of masts to identify rig type But you can identify any rig type if you know what to look for. We've created an entire system for recognizing rig types. Let us walk you through it. Read all about sail rig types

As I've said earlier, there are two major rig types: square rigged and fore-and-aft. We can divide the fore-and-aft rigs into three groups:

• Bermuda rig (we have talked about this one the whole time) - has a three-sided mainsail
• Gaff rig - has a four-sided mainsail, the head of the mainsail is guided by a gaff
• Lateen rig - has a three-sided mainsail on a long yard

There are roughly four types of boats:

• one masted boats - sloop, cutter
• two masted boats - ketch, schooner, brig
• three masted - barque
• fully rigged or ship rigged - tall ship

Everything with four masts is called a (tall) ship. I think it's outside the scope of this article, but I have written a comprehensive guide to rigging. I'll leave the three and four-masted rigs for now. If you want to know more, I encourage you to read part 2 of this series.

One-masted rigs

Boats with one mast can have either one sail, two sails, or three or more sails.

The 3 most common one-masted rigs are:

• Cat - one mast, one sail
• Sloop - one mast, two sails
• Cutter - one mast, three or more sails

1. Gaff Cat

2. Gaff Sloop

Two-masted rigs

Two-masted boats can have an extra mast in front or behind the main mast. Behind (aft of) the main mast is called a mizzen mast . In front of the main mast is called a foremast .

The 5 most common two-masted rigs are:

• Lugger - two masts (mizzen), with lugsail (cross between gaff rig and lateen rig) on both masts
• Yawl - two masts (mizzen), fore-and-aft rigged on both masts. Main mast much taller than mizzen. Mizzen without mainsail.
• Ketch - two masts (mizzen), fore-and-aft rigged on both masts. Main mast with only slightly smaller mizzen. Mizzen has mainsail.
• Schooner - two masts (foremast), generally gaff rig on both masts. Main mast with only slightly smaller foremast. Sometimes build with three masts, up to seven in the age of sail.
• Brig - two masts (foremast), partially square-rigged. Main mast carries small lateen rigged sail.

4. Schooner

5. Brigantine

This article is part 1 of a series about sails and rig types If you want to read on and learn to identify any sail plans and rig type, we've found a series of questions that will help you do that quickly. Read all about recognizing rig types

Related Questions

What is the difference between a gennaker & spinnaker? Typically, a gennaker is smaller than a spinnaker. Unlike a spinnaker, a gennaker isn't symmetric. It's asymmetric like a genoa. It is however rigged like a spinnaker; it's not attached to the forestay (like a jib or a genoa). It's a downwind sail, and a cross between the genoa and the spinnaker (hence the name).

What is a Yankee sail? A Yankee sail is a jib with a high-cut clew of about 3' above the boom. A higher-clewed jib is good for reaching and is better in high waves, preventing the waves crash into the jibs foot. Yankee jibs are mostly used on traditional sailboats.

How much does a sail weigh? Sails weigh anywhere between 4.5-155 lbs (2-70 kg). The reason is that weight goes up exponentially with size. Small boats carry smaller sails (100 sq. ft.) made from thinner cloth (3.5 oz). Large racing yachts can carry sails of up to 400 sq. ft., made from heavy fabric (14 oz), totaling at 155 lbs (70 kg).

What's the difference between a headsail and a staysail? The headsail is the most forward of the staysails. A boat can only have one headsail, but it can have multiple staysails. Every staysail is attached to a forward running stay. However, not every staysail is located at the bow. A stay can run from the mizzen mast to the main mast as well.

What is a mizzenmast? A mizzenmast is the mast aft of the main mast (behind; at the stern) in a two or three-masted sailing rig. The mizzenmast is shorter than the main mast. It may carry a mainsail, for example with a ketch or lugger. It sometimes doesn't carry a mainsail, for example with a yawl, allowing it to be much shorter.

Special thanks to the following people for letting me use their quality photos: Bill Abbott - True Spinnaker with pole - CC BY-SA 2.0 lotsemann - Volvo Ocean Race Alvimedica and the Code Zero versus SCA and the J1 - CC BY-SA 2.0 Lisa Bat - US Naval Academy Trysail and Storm Jib dry fit - CC BY-SA 2.0 Mike Powell - White gaff cat - CC BY-SA 2.0 Anne Burgess - Lugger The Reaper at Scottish Traditional Boat Festival

Hi, I stumbled upon your page and couldn’t help but notice some mistakes in your description of spinnakers and gennakers. First of all, in the main photo on top of this page the small yacht is sailing a spinnaker, not a gennaker. If you look closely you can see the spinnaker pole standing on the mast, visible between the main and headsail. Further down, the discription of the picture with the two German dinghies is incorrect. They are sailing spinnakers, on a spinnaker pole. In the farthest boat, you can see a small piece of the pole. If needed I can give you the details on the difference between gennakers and spinnakers correctly?

Hi Shawn, I am living in Utrecht I have an old gulf 32 and I am sailing in merkmeer I find your articles very helpful Thanks

Thank you for helping me under stand all the sails there names and what there functions were and how to use them. I am planning to build a trimaran 30’ what would be the best sails to have I plan to be coastal sailing with it. Thank you

Hey Comrade!

Well done with your master piece blogging. Just a small feedback. “The jib gives control over the bow of the ship, making it easier to maneuver the ship. The mainsail gives control over the stern of the ship.” Can you please first tell the different part of a sail boat earlier and then talk about bow and stern later in the paragraph. A reader has no clue on the newly introduced terms. It helps to keep laser focused and not forget main concepts.

Shawn, I am currently reading How to sail around the World” by Hal Roth. Yes, I want to sail around the world. His book is truly grounded in real world experience but like a lot of very knowledgable people discussing their area of expertise, Hal uses a lot of terms that I probably should have known but didn’t, until now. I am now off to read your second article. Thank You for this very enlightening article on Sail types and their uses.

Shawn Buckles

HI CVB, that’s a cool plan. Thanks, I really love to hear that. I’m happy that it was helpful to you and I hope you are of to a great start for your new adventure!

Hi GOWTHAM, thanks for the tip, I sometimes forget I haven’t specified the new term. I’ve added it to the article.

Nice article and video; however, you’re mixing up the spinnaker and the gennaker.

A started out with a question. What distinguishes a brig from a schooner? Which in turn led to follow-up questions: I know there are Bermuda rigs and Latin rig, are there more? Which in turn led to further questions, and further, and further… This site answers them all. Wonderful work. Thank you.

Great post and video! One thing was I was surprised how little you mentioned the Ketch here and not at all in the video or chart, and your sample image is a large ship with many sails. Some may think Ketch’s are uncommon, old fashioned or only for large boats. Actually Ketch’s are quite common for cruisers and live-aboards, especially since they often result in a center cockpit layout which makes for a very nice aft stateroom inside. These are almost exclusively the boats we are looking at, so I was surprised you glossed over them.

Love the article and am finding it quite informative.

While I know it may seem obvious to 99% of your readers, I wish you had defined the terms “upwind” and “downwind.” I’m in the 1% that isn’t sure which one means “with the wind” (or in the direction the wind is blowing) and which one means “against the wind” (or opposite to the way the wind is blowing.)

paul adriaan kleimeer

like in all fields of syntax and terminology the terms are colouual meaning local and then spead as the technology spread so an history lesson gives a floral bouque its colour and in the case of notical terms span culture and history adds an detail that bring reverence to the study simply more memorable.

Hi, I have a small yacht sail which was left in my lock-up over 30 years ago I basically know nothing about sails and wondered if you could spread any light as to the make and use of said sail. Someone said it was probably originally from a Wayfayer wooden yacht but wasn’t sure. Any info would be must appreciated and indeed if would be of any use to your followers? I can provide pics but don’t see how to include them at present

kind regards

Leave a comment

You may also like, 17 sailboat types explained: how to recognize them.

Ever wondered what type of sailboat you're looking at? Identifying sailboats isn't hard, you just have to know what to look for. In this article, I'll help you.

How Much Sailboats Cost On Average (380+ Prices Compared)

Own your first boat within a year on any budget.

A sailboat doesn't have to be expensive if you know what you're doing. If you want to learn how to make your sailing dream reality within a year, leave your email and I'll send you free updates . I don't like spam - I will only send helpful content.

Ready to Own Your First Boat?

Just tell us the best email address to send your tips to:

Affordable Sailboats You Can Build at Home

Last Updated by

Daniel Wade

September 13, 2023

‍ Key Takeaways

• There are many sailboats that anyone can build from home depending on tastes
• Budget will be the biggest deciding factor on a majority of the process
• Consider kits that come with most of what you need or choose ones that are all-inclusive
• Design complexities and new materials may make the building time process longer
• Plan the best you can ahead of time to save money and your working hours

‍ Buying a sailboat can be expensive, but building your own can save you money. So what are sailboats you can build from home?

Sailboats that you can build from home will likely be a small boat under 20 feet. These could be from many different boat suppliers such as B&B Yachts, Brooks Boat Designs, and Chase Small Craft. Boat plans will vary based on your budget and how much time you have on your hands.

Based on my previous experience, building your own boat will take much longer than if a professional were to do it. You also have to be able to study plans, consider various sailboat designs, and have tons of supplies such as fiberglass tape or fiberglass cloth. On top of that, you will also have to be good with your hands.

Table of contents

‍ Top 10 Affordable Sailboats Anyone Can Build at Home

Building your own pocket cruiser or other styles from boat plans is an impressive feat, as this will need dedicated time and money to assure your boat sails safely. Boat building takes a lot of patience as well, especially since this will not be completed in a fast manner.

Finding boat plans and materials that fit your budget will be key to being able to complete the project. The time it takes to complete these projects will vary on your overall experience and needs. Below are 10 of the most affordable sailboats that you can build in the comfort of your home.

B&B Yachts

B&B Yachts have 14 different boat plans you can choose from to find the boat of your desires. Their shop is located along the Bay River in North Carolina where they construct all of the kits and have a 100 foot dock to show off your project once you complete it.

One popular model to check out is their Core Sound 15, as it is the perfect size for those wanting to build a modest size boat for a handful of people on board. Their website features some videos of completed projects and the plans or kits for purchase.

• 14 different models to choose from plus some dinghies
• Various monohull and multihull options
• Friendly customer service with attractive prices
• Might be too many options for some that are indecisive
• Not ideal for those wanting to have a motor sailer

Brooks Boat Designs

Brooks Boat Designs has a handful of options to consider for your next sailboat building project. They are located in Brookline, Maine and give the option to buy the kits or have them build one from scratch for you. They have plenty of knowledge, so do not be shy to ask about modifications or custom features you are looking for.

Depending on your specifics, they can attempt to accommodate some of their plans to help fit your desired outcome. By checking out their site, you can see many examples of their construction in progress and what the boats will look like when completed.

• Offers a variety of kits
• Plans vary around $50 and up, while materials will obviously add more costs
• Some plans can be rowing boats that can convert to sailboats
• Might take a while to hear back from them, as their contact section is a little outdated
• Their plans may not accommodate a ton of extras for your taste

Chase Small Craft

Chase Small Craft offers a simple process for building boats. Their kits are equipped with everything you need and will help save you time than just buying the materials outright and other parts you could need. This is arguably one of the best bang for buck instances if you want to save time and money searching for pieces to your boat.

They are located in Saco, Maine and will ship everything to your home from there. All the necessary materials are included and all you need are the proper tools and working space.

• All-inclusive kits with what you need
• Tons of knowledge on their site for boat building
• Easy process to order and customize
• Complete kits can range over $20,000 for larger boats
• Kits may take up to eight weeks to ship out

Chesapeake Light Craft

You can expect high-quality boat kits from Chesapeake Light Craft . They feature 18 different sailboat kits that vary from eight to 20 feet in length. This should be more than enough to find one for you if you are newer to boat building.

They also have a wide variety of other kits in addition to the sailboat, in the event that you wanted to order a small kayak or paddleboard in addition to your sailboat. The prices vary considerably when considering a small or larger boat, so check the complete list of options to in order to potentially fit your needs.

• Plenty of sailboat offerings to choose from
• Different beautiful hull form options to consider
• Easy to build and perfect for sailing
• Only has basic materials needed for kit, so you may need to purchase other items
• Has epoxy shipping fee no matter if you pick up item

Dudley Dix Yacht Design

Dudley Dix Yacht Design has an extensive list of plywood and single skin sailing boat options. They have plenty of sail plans and kits to consider depending on your goals. These follow a classic look for sailboats, which are aesthetically pleasing.

If you are wanting one to accommodate a small family, they have more than plenty to look through. The cost is not as bad compared to others, but keep in mind that you may need to throw in your own supplies or specific tools to get the job done.

• Plans start at $30 and range up to $7,500 or more for kits
• More than enough of options to consider
• Affordable variety of sailboat offerings
• Might be too many options for those new to sailing
• Most are wood without the use of aluminum or steel

Farrier Marine

If you are in search of a multihull to build, then Farrier Marine is what you need. They offer a unique folding catamaran that is trailerable and give you the option to build it yourself. This not only makes it an appealing option, but anyone can take this multihull boat wherever they want with ease.

It features a thorough construction guide once you receive all of the materials. These also come with stainless steel fasteners and an aluminum mast for high-quality materials. Pricing will vary since you must request which model type you are considering.

• Ability to build a unique catamaran
• In-depth construction guide to help
• Easily handled and trailerable
• Price may be too high
• Limited offerings since only a few multihull options

Glen-L Marine Designs

Building a boat from Glen-L Marine Designs can save you time and money. They feature an easy system to order and receive the kits, as well as an in-depth guide to building them. This is an appealing option compared to most boat kit sellers.

The beauty about Glen-L is that anyone can build these from scratch, so you do not have to be the best boat builder in the world to get it done. They offer guides and helpful insights from their team to point you in the right direction. Plans vary around $15, while kits can range well over $1,000 depending on boat size.

• Nearly 50 designs to choose from
• Complete guide to help anyone build it
• Plenty of price points depending on size
• Might be overwhelming with the amount of options
• Could take a while to get parts since they are popular

John Welsford Boat Designs

John Welsford Boat Designs invites new and veteran boat builders that want a taste of quality small wooden boats. The boat plans are designed to meet your specifications and are catered to your desires.

There are seven sailboat designs to choose from so you do not feel overwhelmed in the process. However, they do not sell kits all the time, so you would need to have the materials or be on the lookout for the best prices when they are available.

• Seven sailboat plans with different sizes
• Quality boat builder and supporting community
• In-depth knowledge provided to you when you order
• Might be too small of boat size
• Kits are not always available

Iain Oughtred

There are plenty of options on the wooden boat store, but you should narrow down your search for Iain Oughtred’s line of sailboat kits and plans. There are 25 different plans to choose from, which should accommodate most everyone looking to build their own boat.

While they do offer some kits, they do not routinely offer sailboat kits. You would need to purchase all of the materials if you are considering one of their sail plans. Keep this in mind if you are considering, as you would need to hunt down the parts yourself.

• 25 different sailboat plans to look through
• Various sizes to contemplate for you sailing needs
• Prices will vary but are not bad compared to market
• No sailboat kits, only plans
• Newer boat builders might find too many options unappealing

Paul Gartside Boat Builder and Designer

Gartside Boats is a boat builder company based in Long Island, New York that showcases a variety of boats from traditional and newer methods of boat building. Within that variety, they have boat plans meant for six to 50 feet in length.

With an abundance of options, you will need to contact them regarding prices and any customizable options. Kits may vary as well, as they typically design in-house and build for you.

• Experienced boat designer that can accommodate with custom plans
• Many options are trailerable
• Can have plans for up to a 50 foot boat
• You will need to contact them for prices
• Customized options may make process more complicated for new boat builders

How Much Does it Cost to Build a Sailboat at Home?

As you have likely already done so, the math between building your own boat and buying one may be a huge difference. Likewise, you may even enjoy the challenge of taking an older boat that is gutted and restoring with parts from a kit to build one new again.

But how much does it cost exactly to build a boat from the comfort of your own garage or workshop? The prices are going to vary dramatically depending on your situation and material needed to get the job done. In addition, the time that it takes to complete this will also vary.

Sail plans are rather inexpensive if you are aiming to build a small boat. These plans allow you to see the workings of the boat design and what you need to build the boat.

Without these plans, you will not know the exact details of the design and it can cause major issues with the boat’s hull or other areas of the boat. Think of these as the backbone or instructions of the boat’s infancy before being built.

Price Per Square Foot

You should assume to pay anywhere between $300 to $600 per square foot if you are interested in building a boat. Buying a kit outright can be a good way to save time, but oftentimes these do not come with everything you need.

Instead, you should try to source as much of the materials at the best price as possible. Thinking ahead is part of the process and you might be able to score a deal at a lumber yard or hardware store for parts.

Boat Designs Matter

The design of the boat will be much different from one boat to the next, regardless if they are the same size in length. If you are pondering boats that range anywhere between 16 and 20 feet, you should factor in the shape of the hull, any rigging, and various appendages.

Prices tend to increase when there are more complexities within the designs. If you are considering a kit with more details than others, you will also have to pay more for the designs on that as well.

Kits Can Differ

It is important to understand that all kits are not going to be the same. As you gander at sailboat kits online to stitch together, you need to thoroughly look over to see if you have everything you need before buying.

It would also be at your advantage to ask the seller if any additional parts or supplies are needed. This may change your dynamic on the kit buying process and you may pass up one for another if it has everything you need. An all-inclusive kit may cost several hundred, if not thousands, of dollars more to have the convenience of everything in the bundle.

Construction Approaches

Some boat plans may require you to have certain tools to get the job done. This means special saws or planers, which the average person simply does not have.

Purchasing specialty tools might be expensive upfront and hard to find depending on what it is. Your best bet would be to check locally for others trying to sell their tools or consider a boat plan that does not require extensive tools to finish the job.

How Long Does it Take to Build a Sailboat?

An easy to build sailboat could take a while to build from scratch. Many different variances come into play that are difficult to pinpoint for everyone. But how long is that exactly and how will your experience play into this?

A fun project to sail in the wind could take you several months to well over a year depending on the boat plan and how big your boat is going to be. In addition, the materials all need to be accounted for prior to starting in the event a hardware store does not have them in stock.

Time Varies

The time that passes for simple boat designs on small sailing vessels can be done in a few weeks. This is assuming you have everything you need and work non-stop around the clock.

Certain complex situations may make the process long, such as the difficulty of working with some materials. If you are a skilled laborer, it may take you half the time compared to a novice. The amount of time it can take will vary on your availability and skill level.

Planning ahead will undoubtedly offer the most time-saving features. It also helps if you can tackle parts of the project at your own pace.

Complexity of Design

The design of the boat may make the construction process longer. For example, it may take you longer to build a catamaran compared to a similar lengthed monohull.

More complex designs might require more materials, therefore making the process a bit longer to complete. Furthermore, you will also need more experience working with difficult designs and that will affect you more as a newbie.

Be sure to manage your expectations well and do not allow yourself to become too stressed over this fun project. If you can, seek expert boat building advice from a local builder or the company you purchased sail plans through.

Quality Materials

The quality of the materials will matter significantly when building a boat and will greatly affect the time it takes to construct it. Handling fiberglass or carbon fiber might require specialty tools, while wood also demands a certain level of craftsmanship.

If you are not skilled at working with the material at hand, it might affect the quality of the build and you may have to go back to fix mistakes. This will definitely add more time to your project, because mistakes are bound to happen with your first project.

To save time, consider adding the tools and materials throughout the year or as often as your budget allows. You may want to try testing your skills on fiberglass or other materials to get a feel for how to work with it.

Related Articles

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Best Sailboats

Learn About Sailboats

Most Recent

Best Small Sailboat Ornaments

September 12, 2023

Best Small Sailboats With Standing Headroom

December 28, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

Discover the Magic of Hydrofoil Sailboats

December 11, 2023

Best Bluewater Sailboats Under $50K

Hunter Sailboats: Are They Built for Bluewater Cruising?

August 29, 2023

Popular Posts

Best Liveaboard Catamaran Sailboats

Can a Novice Sail Around the World?

Elizabeth O'Malley

June 15, 2022

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Top Rated Posts

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies. (866) 342-SAIL

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

• Yachting World
• Digital Edition

43 of the best bluewater sailboat designs of all time

• January 5, 2022

How do you choose the right yacht for you? We highlight the very best bluewater sailboat designs for every type of cruising

Which yacht is the best for bluewater boating? This question generates even more debate among sailors than questions about what’s the coolest yacht , or the best for racing. Whereas racing designs are measured against each other, cruising sailors get very limited opportunities to experience different yachts in real oceangoing conditions, so what is the best bluewater sailboat?

Here, we bring you our top choices from decades of designs and launches. Over the years, the Yachting World team has sailed these boats, tested them or judged them for European Yacht of the Year awards, and we have sifted through the many to curate a selection that we believe should be on your wishlist.

Making the right choice may come down to how you foresee your yacht being used after it has crossed an ocean or completed a passage: will you be living at anchor or cruising along the coast? If so, your guiding requirements will be space, cabin size, ease of launching a tender and anchoring closer to shore, and whether it can comfortably accommodate non-expert-sailor guests.

Article continues below…

The perfect boat: what makes an ideal offshore cruising yacht?

Choosing a boat for offshore cruising is not a decision to be taken lightly. I have researched this topic on…

European Yacht of the Year 2019: Best luxury cruisers

Before the sea trials began, I would have put money on a Hallberg-Rassy or the Wauquiez winning an award. The…

All of these considerations have generated the inexorable rise of the bluewater catamaran – monohulls can’t easily compete on these points. We have a full separate feature on the best bluewater multihulls of all time and here we mostly focus on monohulls. The only exceptions to that rule are two multihulls which made it into our best bluewater sailboats of 2022 list.

As so much of making the right choice is selecting the right boat for the venture in mind, we have separated out our edit into categories: best for comfort; for families; for performance; and for expedition or high latitudes sailing .

Best bluewater sailboats of 2022

The new flagship Allures 51.9, for example, is a no-nonsense adventure cruising design built and finished to a high standard. It retains Allures’ niche of using aluminium hulls with glassfibre decks and superstructures, which, the yard maintains, gives the optimum combination of least maintenance and less weight higher up. Priorities for this design were a full beam aft cabin and a spacious, long cockpit. Both are excellent, with the latter, at 6m long, offering formidable social, sailing and aft deck zones.

It likes some breeze to come to life on the wheel, but I appreciate that it’s designed to take up to five tonnes payload. And I like the ease with which you can change gears using the furling headsails and the positioning of the powerful Andersen winches inboard. The arch is standard and comes with a textile sprayhood or hard bimini.

Below decks you’ll find abundant headroom and natural light, a deep U-shape galley and cavernous stowage. For those who like the layout of the Amel 50 but would prefer aluminium or shoal draught, look no further.

Allures 51.9 price: €766,000

The Ovni 370 is another cunning new aluminum centreboard offering, a true deck saloon cruiser for two. The designers say the biggest challenge was to create a Category A ocean going yacht at this size with a lifting keel, hence the hull had to be very stable.

Enjoyable to helm, it has a practical, deep cockpit behind a large sprayhood, which can link to the bimini on the arch. Many of its most appealing features lie in the bright, light, contemporary, clever, voluminous interior, which has good stowage and tankage allocation. There’s also a practical navstation, a large workroom and a vast separate shower. I particularly like the convertible saloom, which can double as a large secure daybed or pilot berth.

Potentially the least expensive Category A lift keel boat available, the Ovni will get you dreaming of remote places again.

Ovni 370 price: €282,080

There’s no shortage of spirit in the Windelo 50. We gave this a sustainability award after it’s founders spent two years researching environmentally-friendly composite materials, developing an eco-composite of basalt fibre and recycled PET foam so it could build boats that halve the environmental impact of standard glassfibre yachts.

The Windelo 50 is an intriguing package – from the styling, modular interior and novel layout to the solar field on the roof and the standard electric propulsion, it is completely fresh.

Windelo 50 price: €795,000

Best bluewater sailboat of 2022 – Outremer 55

I would argue that this is the most successful new production yacht on the market. Well over 50 have already sold (an equipped model typically costs €1.6m) – and I can understand why. After all, were money no object, I had this design earmarked as the new yacht I would most likely choose for a world trip.

Indeed 55 number one Sanya, was fully equipped for a family’s world cruise, and left during our stay for the Grand Large Odyssey tour. Whereas we sailed Magic Kili, which was tricked up with performance options, including foam-cored deckheads and supports, carbon crossbeam and bulkheads, and synthetic rigging.

At rest, these are enticing space ships. Taking one out to sea is another matter though. These are speed machines with the size, scale and loads to be rightly weary of. Last month Nikki Henderson wrote a feature for us about how to manage a new breed of performance cruising cats just like this and how she coaches new owners. I could not think of wiser money spent for those who do not have ample multihull sailing experience.

Under sail, the most fun was obviously reserved for the reaching leg under asymmetric, where we clocked between 11-16 knots in 15-16 knots wind. But it was the stability and of those sustained low teen speeds which really hit home  – passagemaking where you really cover miles.

Key features include the swing helms, which give you views from outboard, over the coachroof or from a protected position in the cockpit through the coachroof windows, and the vast island in the galley, which is key to an open plan main living area. It helps provide cavernous stowage and acts as the heart of the entertaining space as it would in a modern home. As Danish judge Morten Brandt-Rasmussen comments: “Apart from being the TGV of ocean passages the boat offers the most spacious, open and best integration of the cockpit and salon areas in the market.”

Outremer has done a top job in packing in the creature comforts, stowage space and payload capacity, while keeping it light enough to eat miles. Although a lot to absorb and handle, the 55 offers a formidable blend of speed and luxury cruising.

Outremer 55 price: €1.35m

Best bluewater sailboats for comfort

This is the successor to the legendary Super Maramu, a ketch design that for several decades defined easy downwind handling and fostered a cult following for the French yard. Nearly a decade old, the Amel 55 is the bridge between those world-girdling stalwarts and Amel’s more recent and totally re-imagined sloop designs, the Amel 50 and 60.

The 55 boasts all the serious features Amel aficionados loved and valued: a skeg-hung rudder, solidly built hull, watertight bulkheads, solid guardrails and rampart bulwarks. And, most noticeable, the solid doghouse in which the helmsman sits in perfect shelter at the wheel.

This is a design to live on comfortably for long periods and the list of standard features just goes on and on: passarelle; proper sea berths with lee cloths; electric furling main and genoa; and a multitude of practical items that go right down to a dishwasher and crockery.

There’s no getting around the fact these designs do look rather dated now, and through the development of easier sail handling systems the ketch rig has fallen out of fashion, but the Amel is nothing short of a phenomenon, and if you’ve never even peeked on board one, you really have missed a treat.

Photo: Sander van der Borch

Contest 50CS

A centre cockpit cruiser with true longevity, the Contest 50CS was launched by Conyplex back in 2003 and is still being built by the family-owned Dutch company, now in updated and restyled form.

With a fully balanced rudder, large wheel and modern underwater sections, the Contest 50CS is a surprisingly good performer for a boat that has a dry weight of 17.5 tonnes. Many were fitted with in-mast furling, which clearly curtails that performance, but even without, this boat is set up for a small crew.

Electric winches and mainsheet traveller are all easy to reach from the helm. On our test of the Contest 50CS, we saw for ourselves how two people can gybe downwind under spinnaker without undue drama. Upwind, a 105% genoa is so easy to tack it flatters even the weediest crewmember.

Down below, the finish level of the joinery work is up there among the best and the interior is full of clever touches, again updated and modernised since the early models. Never the cheapest bluewater sailing yacht around, the Contest 50CS has remained in demand as a brokerage buy. She is a reassuringly sure-footed, easily handled, very well built yacht that for all those reasons has stood the test of time.

This is a yacht that would be well capable of helping you extend your cruising grounds, almost without realising it.

Read more about the Contest 50CS and the new Contest 49CS

Photo: Rick Tomlinson

Hallberg-Rassy 48 Mk II

For many, the Swedish Hallberg-Rassy yard makes the quintessential bluewater cruiser for couples. With their distinctive blue cove line, these designs are famous for their seakindly behaviour, solid-as-a-rock build and beautifully finished, traditional interiors.

To some eyes, Hallberg-Rassys aren’t quite cool enough, but it’s been company owner Magnus Rassy’s confidence in the formula and belief in incremental ‘step-by-step’ evolution that has been such an exceptional guarantor of reliable quality, reputation and resale value.

The centre cockpit Hallberg-Rassy 48 epitomises the concept of comfort at sea and, like all the Frers-designed Hallberg-Rassys since the 1990s, is surprisingly fleet upwind as well as steady downwind. The 48 is perfectly able to be handled by a couple (as we found a few years back in the Pacific), and could with no great effort crack out 200-mile days.

The Hallberg-Rassy 48 was launched nearly a decade ago, but the Mk II from 2014 is our pick, updated with a more modern profile, larger windows and hull portlights that flood the saloon and aft cabin with light. With a large chart table, secure linear galley, heaps of stowage and space for bluewater extras such as machinery and gear, this yacht pretty much ticks all the boxes.

Discovery 55

First launched in 2000, the Discovery 55 has stood the test of time. Designed by Ron Holland, it hit a sweet spot in size that appealed to couples and families with world girdling plans.

Elegantly styled and well balanced, the 55 is also a practical design, with a deep and secure cockpit, comfortable seating, a self-tacking jib, dedicated stowage for the liferaft , a decent sugar scoop transom that’s useful for swimming or dinghy access, and very comfortable accommodation below. In short, it is a design that has been well thought out by those who’ve been there, got the bruises, stubbed their toes and vowed to change things in the future if they ever got the chance.

Throughout the accommodation there are plenty of examples of good detailing, from the proliferation of handholds and grabrails, to deep sinks in the galley offering immediate stowage when under way and the stand up/sit down showers. Stowage is good, too, with plenty of sensibly sized lockers in easily accessible positions.

The Discovery 55 has practical ideas and nifty details aplenty. She’s not, and never was, a breakthrough in modern luxury cruising but she is pretty, comfortable to sail and live on, and well mannered.

Photo: Latitudes Picture Library

You can’t get much more Cornish than a Rustler. The hulls of this Stephen Jones design are hand-moulded and fitted out in Falmouth – and few are more ruggedly built than this traditional, up-for-anything offshore cruiser.

She boasts an encapsulated lead keel, eliminating keel bolts and creating a sump for generous fuel and water tankage, while a chunky skeg protects the rudder. She is designed for good directional stability and load carrying ability. These are all features that lend this yacht confidence as it shoulders aside the rough stuff.

Most of those built have had a cutter rig, a flexible arrangement that makes sense for long passages in all sea and weather conditions. Down below, the galley and saloon berths are comfortable and sensible for living in port and at sea, with joinery that Rustler’s builders are rightly proud of.

As modern yachts have got wider, higher and fatter, the Rustler 42 is an exception. This is an exceptionally well-mannered seagoing yacht in the traditional vein, with elegant lines and pleasing overhangs, yet also surprisingly powerful. And although now over 20 years old, timeless looks and qualities mean this design makes her look ever more like a perennial, a modern classic.

The definitive crossover size, the point at which a yacht can be handled by a couple but is just large enough to have a professional skipper and be chartered, sits at around the 60ft mark. At 58ft 8in, the Oyster 575 fitted perfectly into this growing market when launched in 2010. It went on to be one of the most popular models from the yard, and is only now being superseded by the newer Rob Humphreys-designed Oyster 565 (just launched this spring).

Built in various configurations with either a deep keel, shoal draught keel or centreboard with twin rudders, owners could trade off better performance against easy access to shallower coves and anchorages. The deep-bodied hull, also by Rob Humphreys, is known for its easy motion at sea.

Some of the Oyster 575’s best features include its hallmark coachroof windows style and centre cockpit – almost everyone will know at first glance this is an Oyster – and superb interior finish. If she has a flaw, it is arguably the high cockpit, but the flip side is the galley headroom and passageway berth to the large aft stateroom.

This design also has a host of practical features for long-distance cruising, such as high guardrails, dedicated liferaft stowage, a vast lazarette for swallowing sails, tender, fenders etc, and a penthouse engine room.

Privilege Serie 5

A true luxury catamaran which, fully fitted out, will top €1m, this deserves to be seen alongside the likes of the Oyster 575, Gunfleet 58 and Hallberg-Rassy 55. It boasts a large cockpit and living area, and a light and spacious saloon with an emphasis on indoor-outdoor living, masses of refrigeration and a big galley.

Standout features are finish quality and solid build in a yacht designed to take a high payload, a secure walkaround deck and all-round views from the helm station. The new Privilege 510 that will replace this launches in February 2020.

Gunfleet 43

It was with this Tony Castro design that Richard Matthews, founder of Oyster Yachts, launched a brand new rival brand in 2012, the smallest of a range stretching to the flagship Gunfleet 74. The combination of short overhangs and centre cockpit at this size do make the Gunfleet 43 look modern if a little boxy, but time and subsequent design trends have been kind to her lines, and the build quality is excellent. The saloon, galley and aft cabin space is exceptional on a yacht of this size.

Photo: David Harding

Conceived as a belt-and-braces cruiser, the Kraken 50 launched last year. Its unique points lie underwater in the guise of a full skeg-hung rudder and so-called ‘Zero Keel’, an encapsulated long keel with lead ballast.

Kraken Yachts is the brainchild of British businessman and highly experienced cruiser Dick Beaumont, who is adamant that safety should be foremost in cruising yacht design and build. “There is no such thing as ‘one yacht for all purposes’… You cannot have the best of all worlds, whatever the salesman tells you,” he says.

Read our full review of the Kraken 50 .

Wauquiez Centurion 57

Few yachts can claim to be both an exciting Med-style design and a serious and practical northern European offshore cruiser, but the Wauquiez Centurion 57 tries to blend both. She slightly misses if you judge solely by either criterion, but is pretty and practical enough to suit her purpose.

A very pleasant, well-considered yacht, she is impressively built and finished with a warm and comfortable interior. More versatile than radical, she could be used for sailing across the Atlantic in comfort and raced with equal enjoyment at Antigua Sailing Week .

A modern classic if ever there was one. A medium to heavy displacement yacht, stiff and easily capable of standing up to her canvas. Pretty, traditional lines and layout below.

Photo: Voyage of Swell

Well-proven US legacy design dating back to the mid-1960s that once conquered the Transpac Race . Still admired as pretty, with slight spoon bow and overhanging transom.

Capable medium displacement cruiser, ideal size and good accommodation for couples or family cruising, and much less costly than similar luxury brands.

Photo: Peter Szamer

Swedish-built aft cockpit cruiser, smaller than many here, but a well-built and finished, super-durable pocket ocean cruiser.

Tartan 3700

Designed as a performance cruiser there are nimbler alternatives now, but this is still an extremely pretty yacht.

Broker ’ s choice

Discovery 55 Brizo

This yacht has already circumnavigated the globe and is ‘prepared for her next adventure,’ says broker Berthon. Price: £535,000 + VAT

Oyster 575 Ayesha

‘Stunning, and perfectly equipped for bluewater cruising,’ says broker Ancasta International. Price: £845,000 (tax not paid)

Oyster 575 Pearls of Nautilus

Nearly new and with a high spec, this Oyster Brokerage yacht features American white oak joinery and white leather upholstery and has a shoal draught keel. Price: $1.49m

Best bluewater yachts for performance

The Frers-designed Swan 54 may not be the newest hull shape but heralded Swan’s latest generation of displacement bluewater cruisers when launched four years ago. With raked stem, deep V hull form, lower freeboard and slight curve to the topsides she has a more timeless aesthetic than many modern slab-sided high volume yachts, and with that a seakindly motion in waves. If you plan to cover many miles to weather, this is probably the yacht you want to be on.

Photo: Carlo Borlenghi

Besides Swan’s superlative build quality, the 54 brings many true bluewater features, including a dedicated sail locker. There’s also a cockpit locker that functions as a utility cabin, with potential to hold your generator and washing machine, or be a workshop space.

The sloping transom opens out to reveal a 2.5m bathing platform, and although the cabins are not huge there is copious stowage space. Down below the top-notch oak joinery is well thought through with deep fiddles, and there is a substantial nav station. But the Swan 54 wins for handling above all, with well laid-out sail controls that can be easily managed between a couple, while offering real sailing enjoyment to the helmsman.

Photo: Graham Snook

The Performance Cruiser winner at the 2019 European Yacht of the Year awards, the Arcona 435 is all about the sailing experience. She has genuine potential as a cruiser-racer, but her strengths are as an enjoyable cruiser rather than a full-blown liveaboard bluewater boat.

Build quality is excellent, there is the option of a carbon hull and deck, and elegant lines and a plumb bow give the Arcona 435 good looks as well as excellent performance in light airs. Besides slick sail handling systems, there are well thought-out features for cruising, such as ample built-in rope bins and an optional semi-closed stern with stowage and swim platform.

Outremer 51

If you want the space and stability of a cat but still prioritise sailing performance, Outremer has built a reputation on building catamarans with true bluewater characteristics that have cruised the planet for the past 30 years.

Lighter and slimmer-hulled than most cruising cats, the Outremer 51 is all about sailing at faster speeds, more easily. The lower volume hulls and higher bridgedeck make for a better motion in waves, while owners report that being able to maintain a decent pace even under reduced canvas makes for stress-free passages. Deep daggerboards also give good upwind performance.

With bucket seats and tiller steering options, the Outremer 51 rewards sailors who want to spend time steering, while they’re famously well set up for handling with one person on deck. The compromise comes with the interior space – even with a relatively minimalist style, there is less cabin space and stowage volume than on the bulkier cats, but the Outremer 51 still packs in plenty of practical features.

The Xc45 was the first cruising yacht X-Yachts ever built, and designed to give the same X-Yachts sailing experience for sailors who’d spent years racing 30/40-footer X- and IMX designs, but in a cruising package.

Launched over 10 years ago, the Xc45 has been revisited a few times to increase the stowage and modernise some of the styling, but the key features remain the same, including substantial tanks set low for a low centre of gravity, and X-Yachts’ trademark steel keel grid structure. She has fairly traditional styling and layout, matched with solid build quality.

A soft bilge and V-shaped hull gives a kindly motion in waves, and the cockpit is secure, if narrow by modern standards.

A three or four cabin catamaran that’s fleet of foot with high bridgedeck clearance for comfortable motion at sea. With tall daggerboards and carbon construction in some high load areas, Catana cats are light and quick to accelerate.

Sweden Yachts 45

An established bluewater design that also features in plenty of offshore races. Some examples are specced with carbon rig and retractable bowsprits. All have a self-tacking jib for ease. Expect sweeping areas of teak above decks and a traditionally wooded interior with hanging wet locker.

A vintage performer, first launched in 1981, the 51 was the first Frers-designed Swan and marked a new era of iconic cruiser-racers. Some 36 of the Swan 51 were built, many still actively racing and cruising nearly 40 years on. Classic lines and a split cockpit make this a boat for helming, not sunbathing.

Photo: Julien Girardot / EYOTY

The JPK 45 comes from a French racing stable, combining race-winning design heritage with cruising amenities. What you see is what you get – there are no superfluous headliners or floorboards, but there are plenty of ocean sailing details, like inboard winches for safe trimming. The JPK 45 also has a brilliantly designed cockpit with an optional doghouse creating all-weather shelter, twin wheels and superb clutch and rope bin arrangement.

Photo: Andreas Lindlahr

For sailors who don’t mind exchanging a few creature comforts for downwind planing performance, the Pogo 50 offers double-digit surfing speeds for exhilarating tradewind sailing. There’s an open transom, tiller steering and no backstay or runners. The Pogo 50 also has a swing keel, to nose into shallow anchorages.

Seawind 1600

Seawinds are relatively unknown in Europe, but these bluewater cats are very popular in Australia. As would be expected from a Reichel-Pugh design, this 52-footer combines striking good looks and high performance, with fine entry bows and comparatively low freeboard. Rudders are foam cored lifting designs in cassettes, which offer straightforward access in case of repairs, while daggerboards are housed under the deck.

Best bluewater sailboats for families

It’s unsurprising that, for many families, it’s a catamaran that meets their requirements best of increased space – both living space and separate cabins for privacy-seeking teenagers, additional crew or visiting family – as well as stable and predictable handling.

Photo: Nicholas Claris

Undoubtedly one of the biggest success stories has been the Lagoon 450, which, together with boats like the Fountaine Pajot 44, helped drive up the popularity of catamaran cruising by making it affordable and accessible. They have sold in huge numbers – over 1,000 Lagoon 450s have been built since its launch in 2010.

The VPLP-designed 450 was originally launched with a flybridge with a near central helming position and upper level lounging areas (450F). The later ‘sport top’ option (450S) offered a starboard helm station and lower boom (and hence lower centre of gravity for reduced pitching). The 450S also gained a hull chine to create additional volume above the waterline. The Lagoon features forward lounging and aft cockpit areas for additional outdoor living space.

Besides being a big hit among charter operators, Lagoons have proven themselves over thousands of bluewater miles – there were seven Lagoon 450s in last year’s ARC alone. In what remains a competitive sector of the market, Lagoon has recently launched a new 46, with a larger self-tacking jib and mast moved aft, and more lounging areas.

Photo: Gilles Martin-Raget

Fountaine Pajot Helia 44

The FP Helia 44 is lighter, lower volume, and has a lower freeboard than the Lagoon, weighing in at 10.8 tonnes unloaded (compared to 15 for the 450). The helm station is on a mezzanine level two steps up from the bridgedeck, with a bench seat behind. A later ‘Evolution’ version was designed for liveaboard cruisers, featuring beefed up dinghy davits and an improved saloon space.

Available in three or four cabin layouts, the Helia 44 was also popular with charter owners as well as families. The new 45 promises additional volume, and an optional hydraulically lowered ‘beach club’ swim platform.

Photo: Arnaud De Buyzer / graphikup.com

The French RM 1370 might be less well known than the big brand names, but offers something a little bit different for anyone who wants a relatively voluminous cruising yacht. Designed by Marc Lombard, and beautifully built from plywood/epoxy, the RM is stiff and responsive, and sails superbly.

The RM yachts have a more individual look – in part down to the painted finish, which encourages many owners to personalise their yachts, but also thanks to their distinctive lines with reverse sheer and dreadnought bow. The cockpit is well laid out with the primary winches inboard for a secure trimming position. The interior is light, airy and modern, although the open transom won’t appeal to everyone.

For those wanting a monohull, the Hanse 575 hits a similar sweet spot to the popular multis, maximising accommodation for a realistic price, yet with responsive performance.

The Hanse offers a vast amount of living space thanks to the ‘loft design’ concept of having all the living areas on a single level, which gives a real feeling of spaciousness with no raised saloon or steps to accommodation. The trade-off for such lofty head height is a substantial freeboard – it towers above the pontoon, while, below, a stepladder is provided to reach some hatches.

Galley options include drawer fridge-freezers, microwave and coffee machine, and the full size nav station can double up as an office or study space.

But while the Hanse 575 is a seriously large boat, its popularity is also down to the fact that it is genuinely able to be handled by a couple. It was innovative in its deck layout: with a self-tacking jib and mainsheet winches immediately to hand next to the helm, one person could both steer and trim.

Direct steering gives a feeling of control and some tangible sailing fun, while the waterline length makes for rapid passage times. In 2016 the German yard launched the newer Hanse 588 model, having already sold 175 of the 575s in just four years.

Photo: Bertel Kolthof

Jeanneau 54

Jeanneau leads the way among production builders for versatile all-rounder yachts that balance sail performance and handling, ergonomics, liveaboard functionality and good looks. The Jeanneau 54 , part of the range designed by Philippe Briand with interior by Andrew Winch, melds the best of the larger and smaller models and is available in a vast array of layout options from two cabins/two heads right up to five cabins and three heads.

We’ve tested the Jeanneau 54 in a gale and very light winds, and it acquitted itself handsomely in both extremes. The primary and mainsheet winches are to hand next to the wheel, and the cockpit is spacious, protected and child-friendly. An electric folding swim and sun deck makes for quick fun in the water.

Nautitech Open 46

This was the first Nautitech catamaran to be built under the ownership of Bavaria, designed with an open-plan bridgedeck and cockpit for free-flowing living space. But with good pace for eating up bluewater miles, and aft twin helms rather than a flybridge, the Nautitech Open 46 also appeals to monohull sailors who prefer a more direct sailing experience.

Made by Robertson and Caine, who produce catamarans under a dual identity as both Leopard and the Sunsail/Moorings charter cats, the Leopard 45 is set to be another big seller. Reflecting its charter DNA, the Leopard 45 is voluminous, with stepped hulls for reduced waterline, and a separate forward cockpit.

Built in South Africa, they are robustly tested off the Cape and constructed ruggedly enough to handle heavy weather sailing as well as the demands of chartering.

Photo: Olivier Blanchet

If space is king then three hulls might be even better than two. The Neel 51 is rare as a cruising trimaran with enough space for proper liveaboard sailing. The galley and saloon are in the large central hull, together with an owner’s cabin on one level for a unique sensation of living above the water. Guest or family cabins lie in the outer hulls for privacy and there is a cavernous full height engine room under the cabin sole.

Performance is notably higher than an equivalent cruising cat, particularly in light winds, with a single rudder giving a truly direct feel in the helm, although manoeuvring a 50ft trimaran may daunt many sailors.

Beneteau Oceanis 46.1

A brilliant new model from Beneteau, this Finot Conq design has a modern stepped hull, which offers exhilarating and confidence-inspiring handling in big breezes, and slippery performance in lighter winds.

The Beneteau Oceanis 46.1 was the standout performer at this year’s European Yacht of the Year awards, and, in replacing the popular Oceanis 45, looks set to be another bestseller. Interior space is well used with a double island berth in the forepeak. An additional inboard unit creates a secure galley area, but tank capacity is moderate for long periods aboard.

Beneteau Oceanis 473

A popular model that offers beam and height in a functional layout, although, as with many boats of this age (she was launched in 2002), the mainsheet is not within reach of the helmsman.

Jeanneau Sun Odyssey 49

The Philippe Briand-designed Sun Odyssey range has a solid reputation as family production cruisers. Like the 473, the Sun Odyssey 49 was popular for charter so there are plenty of four-cabin models on the market.

Nautitech 441

The hull design dates back to 1995, but was relaunched in 2012. Though the saloon interior has dated, the 441 has solid practical features, such as a rainwater run-off collection gutter around the coachroof.

Atlantic 42

Chris White-designed cats feature a pilothouse and forward waist-high working cockpit with helm position, as well as an inside wheel at the nav station. The Atlantic 42 offers limited accommodation by modern cat standards but a very different sailing experience.

Best bluewater sailing yachts for expeditions

Bestevaer 56.

All of the yachts in our ‘expedition’ category are aluminium-hulled designs suitable for high latitude sailing, and all are exceptional yachts. But the Bestevaer 56 is a spectacular amount of boat to take on a true adventure. Each Bestevaer is a near-custom build with plenty of bespoke options for owners to customise the layout and where they fall on the scale of rugged off-grid adventurer to 4×4-style luxury fit out.

The Bestevaer range began when renowned naval architect Gerard Dijkstra chose to design his own personal yacht for liveaboard adventure cruising, a 53-footer. The concept drew plenty of interest from bluewater sailors wanting to make longer expeditions and Bestevaers are now available in a range of sizes, with the 56-footer proving a popular mid-range length.

The well-known Bestevaer 56 Tranquilo  (pictured above) has a deep, secure cockpit, voluminous tanks (700lt water and over 1,100lt fuel) and a lifting keel plus water ballast, with classically styled teak clad decks and pilot house. Other owners have opted for functional bare aluminium hull and deck, some choose a doghouse and others a pilothouse.

Photo: Jean-Marie Liot

The Boreal 52 also offers Land Rover-esque practicality, with utilitarian bare aluminium hulls and a distinctive double-level doghouse/coachroof arrangement for added protection in all weathers. The cockpit is clean and uncluttered, thanks to the mainsheet position on top of the doghouse, although for visibility in close manoeuvring the helmsman will want to step up onto the aft deck.

Twin daggerboards, a lifting centreboard and long skeg on which she can settle make this a true go-anywhere expedition yacht. The metres of chain required for adventurous anchoring is stowed in a special locker by the mast to keep the weight central. Down below has been thought through with equally practical touches, including plenty of bracing points and lighting that switches on to red light first to protect your night vision.

Photo: Morris Adant / Garcia Yachts

Garcia Exploration 45

The Garcia Exploration 45 comes with real experience behind her – she was created in association with Jimmy Cornell, based on his many hundreds of thousands of miles of bluewater cruising, to go anywhere from high latitudes to the tropics.

Arguably less of a looker than the Bestevaer, the Garcia Exploration 45 features a rounded aluminium hull, centreboard with deep skeg and twin daggerboards. The considerable anchor chain weight has again been brought aft, this time via a special conduit to a watertight locker in front of the centreboard.

This is a yacht designed to be lived on for extended periods with ample storage, and panoramic portlights to give a near 360° view of whichever extraordinary landscape you are exploring. Safety features include a watertight companionway door to keep extreme weather out and through-hull fittings placed above the waterline. When former Vendée Globe skipper Pete Goss went cruising , this was the boat he chose to do it in.

Photo: svnaima.com

A truly well-proven expedition design, some 1,500 Ovnis have been built and many sailed to some of the most far-flung corners of the world. (Jimmy Cornell sailed his Aventura some 30,000 miles, including two Drake Passage crossings, one in 50 knots of wind).

Futuna Exploration 54

Another aluminium design with a swinging centreboard and a solid enclosed pilothouse with protected cockpit area. There’s a chunky bowsprit and substantial transom arch to house all manner of electronics and power generation.

Previous boats have been spec’d for North West Passage crossings with additional heating and engine power, although there’s a carbon rig option for those that want a touch of the black stuff. The tanks are capacious, with 1,000lt capability for both fresh water and fuel.

If you enjoyed this….

Yachting World is the world’s leading magazine for bluewater cruisers and offshore sailors. Every month we have inspirational adventures and practical features to help you realise your sailing dreams. Build your knowledge with a subscription delivered to your door. See our latest offers and save at least 30% off the cover price.

RETURN TO  HOME PAGE

Boat Plans, Patterns and Supplies For the Amateur Boat Builder!

• Boat Plans Catalog – 300 Boats You Can Build!
• Boatbuilding Supplies & Epoxy
• Inboard Hardware
• Electrical Design Plans
• Books, DVD’s & Audio
• Boat Trailer Plans
• Raptor® Fastenings & Tools
• Glen-L RV Plans
• Gift Certificates
• Boatbuilder Blogs
• Boatbuilder Galleries
• Newsletter Archives
• Customer Photos Archives
• Where Do I Start…
• About Our Plans & Kits
• Boatbuilder Forum
• Boatbuilder Gatherings
• Boatbuilding Methods
• Featured Design on TV’s NCIS
• Our Boats in Action

Boat Plans Catalog – 300 Boats You Can Build!

“Building boats from Glen-L plans is simple and straight forward…I honestly have never run into a problem, unless it was of my own making. Follow Glen-L’s plans and you can’t go wrong.” Dr. Norman Cove, Bahamas

“Boat building is one of the few pursuits where utilization of the end product is as rewarding as its construction.” Marc Bourassa, Wilmington, MA (built the Power Skiff and 2 Kidyaks)

With Glen-L proven plans & kits, building your own boat can be a reality. Choose one of the categories below, click on a boat for the listing of items available plus more info and photos. Simple as that… get started today!

If you know the boat design name, use our Alphabetical Design Index

Design Characteristics – Boat drawing with all parts listed.

Order a Hard-copy of the Catalog

Click here for more information about our plans and kits.

One Response to Boat Plans Catalog – 300 Boats You Can Build!

[…] am building a 16′ wooden bass boat using the Glen-L design and it is about 80% complete. I am now getting ready to outfit the interior, build the helm, […]

Connect with us:

Customer builds.

Useful Information

• Cost & Time To Build
• Links & Suppliers
• Online Glossary
• Support Knowledge Base
• Teleseminars
• Wood & Plywood

Building Links

• How Fast Does It Go?
• Install A Jet Ski Motor
• Modifying The Motorwell
• Sailboat Hardware Notes

Glen L Marine Design

• About Glen L
• How To Place an Order
• Privacy Policy

Copyright Info.

Copyright 2006-2022 by Glen L Marine Designs. All rights reserved.

Mailing Address: 826 East Park Ave. Port Townsend, WA 98368

[email protected]

Web design by Big Guns Marketing , LLC.

Top 8 Best Boat Design Software in 2024 (Free & Paid)

Written by: 3DSourced

January 16, 2024

Whether you’re a student, a hobbyist, or a professional, finding the right software is the key first step to designing a boat. However, with such a wide range of programs available, you need to make sure you choose the best boat design software for you.

We usually talk about 3D software in relation to 3D printing, but 3D modeling techniques are used across many applications and industries, including boat design. In fact, 3D printing is becoming increasingly prevalent in the boat design industry, with one example being Tanaruz’s 3D printed boats .

Quick Overview

• Free!ship : Best Free Boat Design Software for Linux
• Sailcut CAD : Free Sailboat Design Software
• Bearboat SP : Free Boat Designer for Small Boats & Kayaks
• DELFTship : Intuitive Free Boat Design Tool with Professional Option
• Fusion 360 : Best Free Boat Design Software for Beginners & Mac
• SketchUp : Best Boat Design App for iPad
• Autoship : Best for Naval & Marine Architecture, Best for Windows
• Solidworks : Best for Aluminum Boat Design Software & Best for Yachts

In this guide, we review several 3D ship design software to help you do just that. We’ll take a close look at both free and professional options, so that you’ll be able to find a suitable program regardless of your budget and experience.

Read more: our feature story on 3D printed boats

Best Free Boat Design Software

1. freeship – best free boat design software for linux.

Completely free and open source 

Subdivision modeling to design any hull shape

Can export designs in a range of file formats

Can submit support and feature requests 

Positive reviews from users 

Can be tricky for novices to get used to 

Not available on Mac 

Unlike most of the boat building software on our list, Free!ship isn’t developed by a company, but rather by an individual called Marven with a desire to make boat design accessible to anyone.

Free!ship is a surface modeling program for designing ships and yachts, using subdivision surfaces modeling rather than NURBs, providing the freedom to design hulls of any shape. 

Available on Windows and Linux, you can get started with this free CAD software by automatically generating a basic boat structure to use as a template. You can then easily use the nodes on the structure, as well as a variety of tools like curve, split, collapse, and insert plane, to reshape the design to your liking.

You need to fill in certain parameters, such as:

• Boat length
• Beam length
• Longitudinal and vertical direction

Once you’ve done that, you can view your boat design in four different perspectives and every angle to help you finalize your structure.

Free!ship offers the option to fill out support requests, feature requests, and report bugs. However, bear in mind that design beginners may be better off with a professional free ship design software that has more support options and tutorials available, as you don’t get any training with Free!ship.

2. Sailcut CAD – Free Sailboat Design Software

Specialist sailboat design software 

Easy to use node editing

Supports a variety of sail designs

Export designs in different file types including DXF files

Not suitable for designing other boat types

If you’re looking for a free small boat design software specifically geared towards designing sails and sailboats, you can’t go wrong with Sailcut CAD .

This design and plotting software can be used to design the sail, hull, and rail of a boat, in addition to precisely computing panel development in flat sheets.

You can use it for a variety of different sail types, including wing sails, cross cut, twist foot cut, vertical cut, mitre cut, and radicul cut, so it’s a versatile tool that will suit virtually any sailboat designer.

The software provides a base design template that you can then edit and view in a variety of formats, including shaded, wireframe, and development. It provides control over all the key dimensions of your sailboat, such as boat length, gaff round, and seam width.

Sailcut provides documentation that explains how to use it for CAD as well as community mailing lists and a bug tracker where you can report issues.

3. Bearboat SP – Free Boat Designer for Small Boats & Kayaks 

Specialist kayak design software 

Simple to use 

Control all aspects of your design

Multiple view options

Advanced tools like wetting

Not suitable for larger boat designs

Dated interface 

Bearboat SP is a specialist kayak design software that can also be used to design other similar types of small boats.

People have been using Bearboat to design kayaks since 1998 – and it’s the most popular program for this specific type of boat design. 

It’s a fairly simple, no-frills software that makes it easy to get stuck straight in. You begin by filling in the core boat hull parameters, such as length, stability, and design deplacement, and then just click the ‘create’ button to generate your base kayak template. 

From there, you can go about making structural changes to aspects like shape seam, bow and stern seam height, and rockers parameters. You can also easily change dimensions using the nodes on the 2D wireframe design.

There are three viewing options – bird view, side view, and cross-section view – for inspecting your design from different perspectives, as well as options such as changing the color of the wireframe design for easier analysis. 

Advanced features include the ability to view the wetted surface and underwater area, and a drag spreadsheet that contains all the parameters of your boat design, making Bearboat SP a well-rounded boat design tool overall.

4. DELFTship – Intuitive Free Boat Design Tool with Professional Option

More up-to-date and intuitive than other free boat design software tools

Impressive model rendering

Professional license and extension options

Perform basic calculations to check buoyancy and other factors

Free version has limited features compared to paid version

DELFTship is another great free boat design software, and offers a somewhat more professional and up-to-date solution versus Sailcut and Free!ship, with more impressive renderings than other free programs.

This 3D hull form modeling program is very intuitive with a range of easy-to-use design features, including lots of nodes that make it simple to edit your base model just by dragging and dropping.

You can inspect your models from five different viewpoints and convert them to wireframes and other formats to better analyze structure. Features like the keel and rudder wizard make it simple to design additional components of your boat.

DELFTship provides an unlimited free version alongside a professional license that costs $160. You can also add on extensions and board stability analysis calculations upon request for additional fees.

Even without the paid license you can still use DELFTship free to perform basic hydrostatic calculations and resistance calculations to help improve the precision of your designs, making this one of the most impressive free boat design tools. 

5. Fusion 360 – Best Free Boat Design Software for Beginners & Mac

More beginner-friendly than other boat design software 

Lots of learning resources & tutorials

High quality, flexible 3D modeling tool

Impressive renderings

Available on Mac

Not a specialist boat hull design software

Unlike the other programs we’ve covered so far Fusion 360 is a general purpose 3D modeling software that’s not specifically made for boat designing. However, it’s still widely used in boat designing, and its more general nature has some advantages.

For starters, designing a boat is a fairly large and complex task, and the more specialist software like Free!ship and Bearboat SP are complex if you’re new to computer aided design. 

While Fusion 360 still has a learning curve, it’s one of the best designed, intuitive, and beginner-friendly 3D modeling software out there. On top of that, it has a huge range of learning resources and tutorials, great support, and a large user community, so it’s very popular among new designers.

In fact, there are a variety of YouTube videos and written tutorials showing how to use Fusion 360 for boat design and for different types of vessels, including yachts and canoes. These include videos showing how to design wooden boats , so it’s a good choice if you’re looking for a plywood boat design software.

Another benefit of Fusion 360 is that, unlike most naval architecture boat design software, it’s available on Mac. It even has iOS and Android apps that allow you to view designs and collaborate via your smartphone or tablet. 

Fusion 360 is also free for three years as long as you’re using it non-commercially.

Best Paid Boat Design Software 

6. sketchup – best boat design app for ipad.

• Price : $119 a year for the app (free online version available)

3D modeling iPad app

High quality renderings

Intuitive and beginner-friendly

Free online version available

Not specialized for boat design

SketchUp is another general purpose 3D software used for boat design. While it’s not one of the most widely used boat design programs, the reason it’s on our list is that it’s one of the few premier 3D CAD tools that has a fully-fledged mobile app for iPad.

While some programs like Fusion 360 have viewer apps, these don’t have the modeling tools of their desktop counterparts. However, with the SketchUp iPad app, you can enjoy advanced modeling on a tablet, and you can even get creative using an Apple Pencil stylus.

There are a variety of tutorials and videos showing how to design boats with SketchUp, and as a user-friendly software it’s a good option for beginners. SketchUp also boasts high quality renderings for producing 3D boat designs that you can easily share with anyone. 

While the SketchUp boat design app has a yearly fee, you can also use the software for free using the online-only version, or choose from a variety of desktop licenses that vary in terms of features and storage.

SketchUp also offers iPhone and Android apps, although these are more stripped back versions more suited to viewing and sharing designs on your mobile.

7. Autoship – Best for Naval & Marine Architecture, Best for Windows

• Price : upon quote 

Large software suite that covers the entire boat design pipeline

Used by professional boat manufacturers

Highly intuitive NURBs modeling

Comprehensive testing features and data management

Extensive training and support

Can be used to create load plans

Not available on Mac

Steep learning curve 

Autoship is a software suite designed for professional naval and marine architects that provides solutions for every aspect in the boat design process, from modeling to construction and load planning modules for more optimal loading.

In terms of design, Autoship software offers five different CAD/CAM solutions:

• Autoship Pro – a hull design and surface modeling program.
• Modelmaker – for creating 3D models of vessels and components.
• Autohydro Pro – for analyzing hydrostatics and stability of your models.
• Autoplate – a plate design, expansion, and management system.
• Autopower – for resistance and powering predictions.

So, you can create a package with any number of these programs based on your needs. The great thing about Autoship software is all the programs are fully integrated, so any changes made to your model integrate into each solution.

Autoship Pro is the primary design solution in this suite, with a vast array of advanced features for designing vessels. Based on NURBs modeling, the intuitive interface allows you to work in up to four views simultaneously with ten levels of zoom and unzoom for top precision.

Some of the impressive features of this vessel design software include extensive context menus to help speed up operations, the ability to color surfaces so it’s easy to pick out parts in complex designs, curvature displays for curves and surfaces, hydrostatic and resistance calculations, and strength assessment tools.

Overall, with its mix of powerful design, testing, and engineering features, Autoship is one of the most complete boat design software on the market.

8. Solidworks – Best for Aluminum Boat Design Software & Best for Yachts

• Price : upon quote

Solidworks is one of the most advanced 3D CAD/CAM software out there and is widely used across design and engineering industries, from automotive to aerospace as well as boat design. 

In fact, this software is used by a number of leading boat manufacturers. One such example is Kvichak Marine Industries, a Seattle-based maker of high quality aluminum vessels, including both passenger and industrial boats.

In this v i deo , the assistant chief engineer explains how Solidworks’ highly precise 3D modeling tools allow them to improve processes by spotting issues quicker and therefore improve efficiency, with the ability to inspect every element from the individual pipes within hulls to the connections within engines.

Solidworks’ extremely advanced and flexible modeling allows you to create any type of boat you like. There’s even an eBook that explains each step in designing a superyacht using Solidworks.

While this software is mostly used by professional companies, there are also numerous YouTube videos showing you how to design a boat with it, so it’s accessible to amateurs.

What is Boat Design Software?

A boat design software is a program used to sketch, plan, and model a boat in 3D. Popular boat design programs include Free!ship, Solidworks, Fusion 360, and Autoship.

What is naval architecture?

Naval architecture is the processing of designing and engineering marine vessels like ships and boats, as well as their parts. Naval architects also work in boat and ship repair. 

Do I need special software for designing boats?

You don’t need a special boat design software to design boats and ships. While there are a number of specialist boat design software tools out there, general 3D modeling CAD programs like Fusion 360 and AutoCAD are also used for this purpose. 

What Can You Do With Boat Software? 

All boat software have different features that determine what you can do with them. For example, certain programs are designed for creating certain types of boats, such as kayaks and sailboats, so this is the first consideration you need to make to find a suitable program.

More expensive programs typically offer a much wider range of features than paid versions. At the top end are industrial solutions like Autoship and Solidworks, which offer extremely high quality and flexible modeling tools and provide support for testing, manufacturing, and engineering processes, so they’re complete solutions. 

There are also software like DELFTship and Fusion 360 that provide both free and paid versions, so you can try out the free versions and then upgrade if you want the extra features available on the paid licenses.

Buying Guide – Things to consider when choosing boat software

Type of Boat

Boats come in all different shapes and sizes, and some software are specially built for designing certain types of boats. For example, Bearboat SP is primarily geared towards kayak designing, while Sailcut is for sailboats. 

On the other hand, general 3D modeling software like Fusion 360 and Solidworks are more flexible, so you could use it as a Yacht design software and for other types of boats. The benefits of this are the increased flexibility and beginner-friendliness, but these general programs can lack some of the more specialist features that the likes of Bearboat SP and Sailcut have.

Compatibility

The device you’re using is going to have an impact on what naval architecture software you use, as most programs only work on certain operating systems.

In fact, the majority of boat design software are only compatible with Windows. If you’re looking for a boat design software for Mac, Linux, or iPad, you may be best off using a more general purpose 3D modeling software like Fusion 360 or SketchUp.

3D Rendering & Graphic Quality

Free programs like Free!ship, Sailcut, and Bearboat SP are all great for creating precise boat designs at no expense, but in terms of graphics and 3D model rendering, they’re all very basic. 

This isn’t unusual when it comes to free programs, and if you’re not bothered about graphics then it’s no issue. However, if you do want to create higher quality models and renderings – which is especially important if you’re a student or aspiring professional boat designer – then you’ll need a program that provides this, such as Solidworks or Autoship.

Usability & Training

Boat design isn’t exactly a simple process, so if you’re a complete beginner, you’ll want a software that’s easier to get to grips with. 

The free boat design software we’ve covered are all fairly simple to use, but the level of intuitiveness and support varies. If you’re a complete newbie to computer design, you may want to go for a widely used modeling software like SketchUp or Fusion 360, both of which boast great support, large communities, and more tutorials than specialist boat structural design software.

Budget & Free Trial 

The price of boat design software can vary a lot, from free programs to expensive professional solutions like Solidworks and Autoship that can cost thousands, so bear this in mind. Many paid boat design software offer free trials, so you should definitely take advantage of this to try a program out.

What software is best for basic boat design?

Free!ship, Delftship, and Sailcut are all popular free software that allow you to create basic boat designs. 

How do you design a yacht?

If you want to design yachts, the first step is to find a high quality yacht designing software such as Solidworks or Autoship.

How do you become a boat architect / ship designer?

To be a boat architect or ship designer you need to first obtain a relevant degree, such as a BEng or MEng in naval architecture.

How much do yacht architects make?

Yacht and naval architects can make anywhere from $60,000 to $150,000 depending on their experience and position, with the average salary around $75,000.

Autoship, Solidworks, Maxsurf, and OrcaFlex are all popular marine design software that are used in professional ship design.

To become a boat designer you first need a degree in a relevant subject, such as naval architecture, ship science, or marine technology. 

The best way to learn how to make a boat hull in Solidworks is by watching one the boast hull design tutorial provided by Solidworks Product Manager Mark Biasotti.

The first step to designing a yacht is finding a suitable CAD software, such as Solidworks or Fusion 360.

Lightning CAD Dock Designer is one of the most popular boat dock design software.

Related posts:

• Top Free CAD Software for 3D Printing For Every Skill Level
• Best 2D & 3D Car Design Software in 2022
• Top Picks For Beginner & Pro Free Furniture Design Software
• Best PCB Design Software
• Free Floor Plan Software
• Garage Design Software
• Great Pool Design Software

Was this content helpful? Give us your feedback here.

Learn More About 3D Sourced

6 Best Large 3D Printers in 2024 (All Budgets)

5 Best 3D Printers for Miniatures & Terrain in 2024

4 Fastest 3D Printers in 2024 (All Budgets)

The 56+ Coolest Things To 3D Print in 2023

44 Common 3D Print Problems – Troubleshooting Issues 2023

13 Best Free 3D Modeling Software (For Beginners) 2024

11 Best 3D Printers in 2024 (All Budgets)

5 Best 3D Printers For Beginners in 2024

Exceptional value with anycubic’s latest 3d printer deals.

40+ 3D Printing Industry Statistics (2024 Update)

22+ Coolest 3D Printed Robotics Projects (2024 Update)

8 Best DIY 3D Printer Kits in 2024 (From $150!)

3D Printing In Space – Top Projects in 2023

Best 3D Printed Shoes in 2023 (Sneakers, Heels & More)

The Best 3D Printer Buyer's Guide Resource & 3D Printer Reviews

[email protected]

3D Printers 3D Scanners 3D Software Guides Rankings Interviews News

Most Popular

Best 3D Printers Best 3D Scanners Best 3D Modeling Software Best 3D Slicers Best Resin 3D Printers Fastest 3D Printers Best Large 3D Printers

Useful Links

About us About the team How we do our reviews Careers Contact Us

Sign up to our newsletter

Privacy policy

Affiliate disclaimer

Editorial policy

Press Herald

Account Subscription: ACTIVE

Questions about your account? Our customer service team can be reached at [email protected] during business hours at (207) 791-6000 .

• Local & State

Observe Memorial Day with these events in southern Maine

Tons of towns have parades and ceremonies happening Monday.

You are able to gift 5 more articles this month.

Anyone can access the link you share with no account required. Learn more .

With a Press Herald subscription, you can gift 5 articles each month.

It looks like you do not have any active subscriptions. To get one, go to the subscriptions page .

Loading....

Kids and adults gather at a Memorial Day parade to honor and celebrate veterans in South Portland. Sofia Aldinio/ Staff Photographer

BATH 10 a.m. Monday. Parade begins at 200 Congress Ave. and concludes at Library Park and will be followed by a wreath-laying service at 11 a.m.

BERWICK 11 a.m. Monday. Parade begins at Berwick Town Hall/Sullivan Square and proceeds to Lord’s Cemetery by way of Wilson and Allen streets. After a ceremony there, the parade will continue down Saw Mill Hill Street with a pause at the Somersworth-Berwick Bridge for a brief memorial service for those lost at sea. The parade ends at Sullivan Square with a memorial service honoring area veterans.

BIDDEFORD-SACO Opening ceremony at 9:55 a.m. Monday at Saco City Hall. Parade starts at 10 a.m. from Saco City Hall and proceeds along Main Street and down York Hill into Biddeford, continues along Main Street, onto Alfred Street and finishes at Veteran’s Memorial Park with a closing ceremony at 10:45 a.m.

BRUNSWICK-TOPSHAM 9 a.m. Monday. Parade proceeds from Topsham Town Hall, pauses for observances while crossing the Brunswick-Topsham bridge, and concludes at the Brunswick Mall.

CAPE ELIZABETH 9 a.m. Monday. Parade begins at the middle school parking lot, turns right on Scott Dyer Road, right onto Route 77 and ends at the village green adjacent to the town hall. A brief ceremony and laying of the wreath will be held at the Village Green after the parade.

CUMBERLAND 8 a.m. Monday. Kids run at Greely High School followed by 5K Run and Remember race at 8:30 a.m. Parade starts at 10 a.m. at Mabel I. Wilson School and ends at the veterans’ monument in Moss Side Cemetery in Cumberland Center, where a ceremony will be held at 10:30 a.m. Advertisement

FALMOUTH 10 a.m. Monday. Parade proceeds from 65 Depot Road (Falmouth American Legion) to Pine Grove Park, where a ceremony will be held.

FREEPORT 9:30 a.m. Monday. Parade proceeds from Holbrook Street, heads north on Main and makes a right onto School Street, then right onto Park Street, ending in Memorial Park. There will be a small ceremony in Memorial Park starting at 10 a.m.

GORHAM 11 a.m. Monday. Parade starts at Village School (12 Robie St.) and ends at Eastern Cemetery on Johnson Road.

GRAY 11:30 a.m. Monday. Parade leaves the Russell School (8 Gray Park), proceeds to Shaker Road and continues to the Soldiers Monument at the intersection of Routes 26 and 3 for a wreath-laying ceremony. Parade continues north to the American Legion Post (15 Lewiston Road) for a closing ceremony.

LYMAN 1 p.m. Monday. Parade starts at Waterhouse Road/Mill Pond in Goodwins Mills and ends at the Lyman Town Hall on South Waterboro Road.

NEW GLOUCESTER 9 a.m. Monday. Parade leaves from Memorial Elementary School (86 Intervale Road) and heads down Intervale Road to Route 100/202 to Veterans Park for a memorial service. The parade will reconvene and go down Peacock Hill Road, then take a left on Gilmore Road. Advertisement

OLD ORCHARD BEACH 1 p.m. Monday. Parade starts at the corner of Ballpark Way and E. Emerson Cumming Boulevard and proceeds down Saco Avenue, Old Orchard Beach Street to First Street and ends at Veteran’s Memorial Park.

PORTLAND 2 p.m. Monday. The procession starts at Longfellow School (432 Stevens Ave.) and ends at Evergreen Cemetery for a commemoration ceremony.

SANFORD 10 a.m. Monday. The parade starts at the Sanford Armory (88 William Oscar Emery Drive), proceeds up Gowen Park Drive and ends at Central Park.

SCARBOROUGH 10 a.m. Monday. Parade starts at Scarborough High School, turns onto Route 114 and then Route 1, past town offices to the Maine Veterans Home and concludes with a ceremony there.

SOUTH PORTLAND 10:30 a.m. Monday. Parade starts at Southern Maine Community College parking lot, proceeds down Broadway to the Veterans Monument for a short Memorial Day recognition service.

WELLS 9 a.m. Monday. Parade starts at Wells High School (200 Sanford Road) and proceeds to Ocean View Cemetery for a ceremony and musical performances. Advertisement

WESTBROOK 10 a.m. Monday. Parade proceeds down Main Street and will be followed by a ceremony in Riverbank Park.

WINDHAM 9 a.m. Monday. Parade starts at Windham Town Hall and proceeds onto Route 202 toward Windham High School. At 10 a.m., there will be a ceremony in front of Windham’s Veterans Memorial Flagpole at Windham High School.

YARMOUTH 10 a.m. Monday. Parade leaves from Yarmouth High School (286 West Elm St.) and proceeds to the Memorial Green at Town Hall for a ceremony.

YORK 10 a.m. Monday. Parade starts near St. Christopher’s Church (4 Barrell Lane) and proceeds down York Street to York Town Hall.

Success. Please wait for the page to reload. If the page does not reload within 5 seconds, please refresh the page.

Enter your email and password to access comments.

Forgot Password?

Don't have a commenting profile? Create one.

Hi, to comment on stories you must create a commenting profile . This profile is in addition to your subscription and website login. Already have a commenting profile? Login .

Invalid username/password.

Please check your email to confirm and complete your registration.

Create a commenting profile by providing an email address, password and display name. You will receive an email to complete the registration. Please note the display name will appear on screen when you participate.

Already registered? Log in to join the discussion.

Only subscribers are eligible to post comments. Please subscribe or login first for digital access. Here’s why .

Use the form below to reset your password. When you've submitted your account email, we will send an email with a reset code.

Send questions/comments to the editors.

Report says former Maine Turnpike executive threatened and intimidated employees for years

Duckfat owners, pioneers of portland’s food scene, retire and sell restaurants, top westbrook school department official charged with oui, man killed at portland ymca had a love of music, portland rent board recommends $6,000 fine against landlord accused of retaliation, daily headlines.

• Email address
• Hidden Untitled
• Email This field is for validation purposes and should be left unchanged.

Member Log In

Please enter your username and password below. Already a subscriber but don't have one? Click here .

Not a subscriber? Click here to see your options